概览:
Create: 自动导航雷达!
Create: Autonavigation + Create: Radar
在新版本中,您可以直接将 Sable 机械装置瞄准雷达目标。为此,请将智能导航台连接到雷达网络。
此功能需要安装 Create: Radar。
Create: Autonavigation 是一款轻量级的 Create 与 Create: Aeronautics 附加模组。
它引入了智能导航台(Smart Navigation Table),这是对原有导航台的升级版,旨在提供更轻松、更灵活的自动驾驶控制。您不再需要手动准备指南针并依赖磁铁矿,而是可以直接在导航台内置的图形用户界面中输入目标坐标,从而更舒适地引导您的载具。
这使得围绕 Create: Aeronautics 构建的飞行、驾驶和航海机器更加顺畅地进行导航。该模组保留了原版导航台的熟悉理念,同时通过直接输入坐标来加快路线设置并提升机动性。
当前功能:带有内置坐标输入的智能导航台,无需磁铁矿,无需手动设置指南针,以及为 Aeronautics 载具提供更便捷的自动驾驶瞄准功能。
智能导航台使用示例
您可以建造军事自动制导机械装置,为您的飞艇和飞机配备更可靠的导航系统,并为飞行、驾驶或航海载具准备基于坐标的控制方案。
它可用于战斗机械、侦察机、运输载具以及需要快速且可重复路线控制的大型移动建筑。无论您是设置飞艇巡逻路线、引导突击机械,还是构建由红石辅助的自主导航系统。
游戏内说明
此附加模组不使用可见的指针箭头。
导航完全通过红石信号和基于坐标的方向处理。这将在未来版本中修复。
CC: Tweaked 兼容性
智能导航台可作为 CC: Tweaked 的外设使用。将计算机直接连接到导航台或通过有线调制解调器连接,然后在 Lua 程序中将其识别为 smart_navigation_table。您可以从 Lua 程序中设置手动坐标、读取当前目标并检查导航台的状态。
| 方法 |
描述 |
setTargetCoordinates(x, y, z) |
使用整数坐标设置手动目标 |
clearTarget() |
清除手动目标 |
getTargetCoordinates() |
返回当前目标作为 {x, y, z},若无目标则返回 nil |
getManualTarget() |
返回保存的手动目标,即使已连接到雷达网络 |
getStatus() |
返回当前模式(idle、manual 或 radar)以及是否有可用目标 |
getPosition() |
返回导航台在世界中的位置 |
getPointerAngle() |
返回指针角度 |
getRedstoneOutputs() |
返回每个方向计算出的红石信号 |
```lua local nav = peripheral.find("smart_navigation_table") nav.setTargetCoordinates(120, 80, -45) print(textutils.serialize(nav.getTargetCoordinates()))
前置要求:Create 和 Create: Aeronautics。
免责声明
本模组的部分内容使用人工智能创建。
Overview:
Create: Autonavigation Radar!
Create: Autonavigation + Create: Radar
In the new update, you can aim Sable contraptions directly at radar targets. To do this, connect the Smart Navigation Table to a radar network.
Create: Radar is required for this feature.
Create: Autonavigation is a lightweight addon for Create and Create: Aeronautics.
It introduces the Smart Navigation Table, an upgraded version of the navigation table designed for easier and more flexible autopilot control. Instead of manually preparing a compass and relying on magnetite, you can enter target coordinates directly in the table's built-in GUI and guide your craft more comfortably.
This makes navigation much smoother for flying, driving, and sailing machines built around Create: Aeronautics. The mod keeps the familiar idea of the original navigation table while extending it with direct coordinate input for faster route setup and better mobility.
Current features: Smart Navigation Table with built-in coordinate input, no magnetite requirement, no manual compass setup, and more convenient autopilot targeting for Aeronautics vehicles.
Examples of Using the Smart Navigation Table
You can build military auto-guiding contraptions, equip your airships and airplanes with more reliable navigation systems, and prepare coordinate-based control for flying, driving, or sailing vehicles.
It can be used for combat craft, scouting machines, transport vehicles, and large moving builds that need fast and repeatable route control. Whether you are setting up an airship patrol route, guiding a strike craft, or building autonomous redstone-assisted navigation systems.
Gameplay Note
This add-on does not use a visible pointer arrow.
Navigation is handled solely via Redstone signals and coordinate-based orientation. This will be fixed in future versions.
CC: Tweaked Compatibility
The Smart Navigation Table can be used as a CC: Tweaked peripheral. Connect a computer directly to the table or through a wired modem, then find it as smart_navigation_table. You can set manual coordinates, read the current target, and check the table’s status from a Lua program.
| Method |
Description |
setTargetCoordinates(x, y, z) |
Sets a manual target using integer coordinates |
clearTarget() |
Clears the manual target |
getTargetCoordinates() |
Returns the current target as {x, y, z}, or nil if there is no target |
getManualTarget() |
Returns the saved manual target, even when connected to a radar network |
getStatus() |
Returns the current mode (idle, manual, or radar) and whether a target is available |
getPosition() |
Returns the table’s position in the world |
getPointerAngle() |
Returns the pointer angle |
getRedstoneOutputs() |
Returns the calculated signals for each direction |
```lua local nav = peripheral.find("smart_navigation_table") nav.setTargetCoordinates(120, 80, -45) print(textutils.serialize(nav.getTargetCoordinates()))
Requirements: Create and Create: Aeronautics.
Disclaimer
Part of the mod was created using artificial intelligence.
评论 0
登录后参与评分
还没有评论,来抢沙发吧