Create: Odds 'N Ends
为 Create 提供的四种奇特机器。复制车床可将方块加工成不同的形状。雅卡尔织机利用打孔卡片编织图像。风琴管通过管道、鼓和哨子演奏打孔乐谱。最后,CNC 铣床让你在一个设备中运行 Create 的部署配方和顺序装配。
它们都依靠旋转动力运行,并且可以与漏斗和机械臂配合使用。在物品栏中按住 W 键点击任意机器即可查看其 Ponder 演示场景。
复制车床
将一个方块变成栏杆柱、花瓶、桌腿或任何你希望的形状!材质不会改变,因此橡木原木会变成橡木 spindle(车削件),石英会变成石英。也可以使用来自其他模组的方块。
制作步骤:
- 在一行中放置 3 个车床底座,主轴箱在一端,尾座在另一端。
- 用扳手点击主轴箱。如果任何部件放置错误,你会收到一条提示错误的消息。
- 使用模板表将所需的形状绘制到轮廓模板上。16 条横杆中的每一条代表一个独立的层。
- 手持模板右键点击车床,然后手持方块右键点击。旋转主轴箱。
如果你想制作同样的东西,需要在车床后方 2 个方块处制作一个追踪器,包含 3 条铁轨和两端的支架。将你的物品放入支架中,车床就会模仿它,忽略模板。
雅卡尔织机
这通过一串打孔卡片编织挂毯。你在打孔机上绘制图像,打孔卡片,然后进行编织。
制作步骤:
- 使用织机架制作框架,宽 3 格、高 3 格、深 2 格。中间层的中心将为空。在底部前角放置织机驱动器。在顶部后部放置雅卡尔头。
- 用扳手点击头部以组装。旋转驱动器。
- 右键点击打孔机并绘制图像,最大支持 3x4 个方块和 16 种颜色。按保存。
- 将空白卡片放入打孔机(每行一张)并旋转。这将给你一串卡片链。
- 将卡片链和一些羊毛放入织机。一块羊毛会生成 256 像素的布料。如果某种颜色用完,织机会暂停,直到你添加更多。
你可以将挂毯挂在墙上或铺在地上作为地毯。卡片链保留在织机中,因此你可以继续编织副本。
风琴管
使用风箱从书中播放音乐。风琴体本身不发出任何声音。将风管从侧面的铜端口连接到风箱。风箱上的内容将被演奏。
- 放置风琴管(2 格高)并旋转背面。旋转越快,播放速度越快。
- 打开打孔机并选择“乐谱”选项卡。在钢琴卷帘上绘制你的曲调或导入 MIDI 文件。按保存。
- 将空白卡片放入打孔机(每页一张)并旋转。这将给你一本音乐书。
- 手持书本右键点击风琴。
侧面的盒子允许你在“播放一次”或“循环”之间选择。风琴可以使用红石暂停。如果设置为“播放一次”,在歌曲结束时它会给出一个快速脉冲。
你可以将这些放在风箱上:
- 蒸汽哨。 播放自己的音符。不需要锅炉。在风箱背面切换精确音高和任意八度。
- 簧片管、木管和簧片盒。 以真实音高播放风箱允许的所有音符。同时最多可播放 6 个音符。
- 底鼓和军鼓。 播放乐谱中各自的轨道。
如果你在风箱的过滤器中放入染料,它将只播放该声部。如果风箱上没有东西,它仍然会吹出音符并发出红石信号。这使得一排风箱可以将你的乐谱变成控制灯或门的序列器。
CNC 铣床
由黄铜制成的 4x3x3 铣床。要创建箱体,请放置 CNC 框架。在其中一侧的中心位置放置 Pendant( pendant 通常指手持控制器/终端)。在另一侧底部的中心放置 CNC 驱动器。用扳手点击 Pendant。旋转驱动器。
默认情况下,这允许你运行 Create 的部署配方并完成顺序装配(不包含任何流体步骤)。装配将消耗 1 圈零件,并且比 Create 生产线快得多。任何原本需要放置在部署器中的工具(如斧头等)都需要放置在铣床中,但不会被消耗。你可以在整合包中使用 createoddsnends:cnc 配方类型向铣床添加自定义配方。
手动操作时,你可以按下 Pendant 或点击正面以打开门。放入零件并取出成品(每次点击取出一组)。如果门打开,机器将不会切割。要实现自动化,通过顶部的舱口放入零件。成品从 Pendant 一端的舱口排出。漏斗、滑槽、漏斗车、机械臂和其他模组的管道都可以工作。机械臂也可以用于正面。铣床会完成当前的切割,然后门打开供机械臂取货。
常见问题
支持哪些版本? NeoForge 1.21.1 以及 Create 6.0.10 或更高版本(6.0 系列)。我使用 6.0.10 进行了测试
我需要 JEI/EMI 吗? 不需要。两者之一或同时安装都会为你提供车削、打孔、编织和 CNC 的配方页面。
我可以自定义 CNC 吗? 可以。在服务器配置中,你可以将 cnc.deploying 和 cnc.sequencedAssembly 设置为 false 来禁用借用的配方。你还可以使用 cnc.assemblyLoopsCharged 调整装配成本,并使用 cnc.assemblyStepTicks 调整运行速度。
我可以在整合包中使用这个模组吗? 可以!代码采用 MIT 许可,资产保留所有权利(不要在你的模组中使用这些纹理/模型)。
我需要你的反馈!!!
这个模组仍在开发中,你的反馈非常重要!如果遇到任何错误或有新功能建议,请告诉我:
Create: Odds 'N Ends
Four odd machines for Create. The copy lathe takes blocks and makes them into different shapes. The jacquard loom takes punched cards and weaves images. The barrel organ plays a punched track using pipes, drums and whistles. Finally, the CNC mill lets you run Create's deploying recipes and sequenced assemblies in one box.
All of them run on rotation and work with funnels and mechanical arms. You can hold W over any of them in your inventory to see their Ponder scenes.
Copy lathe
Take a block and make it into a baluster, vase, table leg or any shape you wish! The material will not change, so an oak log will become an oak spindle and quartz will become quartz. Blocks from other mods can also be used.
To make it:
- Add 3 lathe beds in a row with the headstock on one end and the tailstock on the other.
- Wrench the headstock. If any part is placed incorrectly you'll get a message telling you what's wrong.
- Use the template table to draw your desired shape onto the profile template. Each of the 16 bars is a separate layer.
- Right click the lathe with the template in your hand, then right click with your block. Spin the headstock.
If you want to make another of the same thing you've made, make a tracer set 2 blocks behind the lathe, with 3 rails and a holder on either end. Place your item into a holder and the lathe will mimic it, ignoring the template.
Jacquard loom
This weaves tapestries from a chain of punched cards. You draw your image on the card punch, punch the cards and weave them.
To make it:
- Make a frame from the loom frames, 3 wide, 3 high and 2 deep. The centre of the middle layer will be empty. On the bottom front corner place the loom drive. On the top back place the jacquard head.
- Wrench the head to assemble it. Spin the drive.
- Right click the card punch and draw your image, up to 3x4 blocks and 16 colours. Press save.
- Place blank cards into the punch (one per row) and spin it. This will give you a chain of cards.
- Place the chain and some wool into the loom. A block of wool will give you 256 pixels of fabric. If you run out of a colour the loom will pause until you add more.
You can hang the tapestry on a wall or lay it out as a rug. The chain stays in the loom, so you can keep weaving copies.
Barrel organ
Plays music from books using wind chests. The organ body itself does not make any noise. Connect wind lines from the copper port on the side to wind chests. Whatever is on the chest will play.
- Place the barrel organ (2 blocks high) and spin the back. The faster you spin, the faster it will play.
- Open up the card punch and select the Score tab. Draw your tune on the piano roll or import a MIDI file. Press save.
- Place blank cards in the punch (one per page) and spin. This will give you a book of music.
- Right click the organ with the book.
The box on the side will let you choose between Play once or Loop. The organ can be paused using redstone. If on Play once it will give a quick pulse at the end of your song.
You can put these on the wind chests:
- Steam whistle. Plays its own note. No boiler is needed. Toggle between exact pitch and any octave on the back of the chest.
- Reed pipe, wood pipe and reed box. Play every note the chest allows at real pitch. Up to 6 notes can be played at once.
- Kick and snare drums. Play their own lane of the score.
If you put a dye in the filter of the chest it will only play that voice. If there's nothing on the chest it will still blow its notes and give off redstone. This makes a line of chests turn your score into a sequencer for lamps or doors.
CNC mill
A 4x3x3 mill made from brass. To create the box, place CNC frames. On one of the short sides place the pendant in the centre. On the other place the CNC drive in the centre of the bottom. Wrench the pendant. Spin the drive.
By default this lets you run Create's deploying recipes and complete sequenced assemblies (that don't have any fluid steps). The assembly will cost 1 loop of parts and will be much faster than a Create line. Any tools that you would keep in a deployer (axes etc.) will need to be placed in the mill but will not be consumed. You can add your own recipes to the mill using the createoddsnends:cnc recipe type in modpacks.
Manually, you can press the pendant or click the front to open the doors. Place your parts in and take your finished items out (1 stack per click). The machine will not cut if the doors are open. To automate, place your parts in through the hatch on top. Finished items come out through the hatch on the pendant's end of the machine. Funnels, chutes, hoppers, arms and other mods' pipes will all work. Arms can also be used on the front. The mill finishes what it is cutting, then the doors open for the arm.
FAQ
What versions? NeoForge 1.21.1 with Create 6.0.10 or higher (6.0 line). I tested with 6.0.10
Do I need JEI/EMI? No. Both, or just one, will give you recipe pages for turning, punching, weaving and the CNC.
Can I customise the CNC? Yes. In the server config you can disable the borrowed recipes by setting cnc.deploying and cnc.sequencedAssembly to false. You can also adjust how much the assembly costs with cnc.assemblyLoopsCharged and how fast it runs with cnc.assemblyStepTicks.
Can I use this in a modpack? Yes! The code is MIT and the assets are All Rights Reserved (don't use the textures/models in your own mod).
I need your feedback!!!
This mod is a work in progress, and your feedback is pretty important! If you encounter any bugs or have suggestions for new features, please let me know:
评论 0
登录后参与评分
还没有评论,来抢沙发吧