Doorchestra
让每一次入口的开启都同步如一。
Doorchestra 是一个服务端 Fabric 模组,在保持行为接近原版 Minecraft 的同时,同步双扇、三扇和四扇门的开关状态。它还联动匹配的活板门和栅栏门,支持红石信号与压力板,并允许玩家通过潜行暂时绕过联动效果。
专用服务器: 仅在服务器上安装 Doorchestra。连接的玩家无需安装该模组。
单人游戏: 需在客户端实例中安装 Doorchestra,因为单人游戏运行在 Minecraft 的集成服务器中。
功能特性
- 双扇门: 同时打开或关闭两扇匹配的门。
- 联动的活板门与栅栏门: 相邻的匹配对会同步移动。
- 三扇门: 使用两扇外侧门,中间可为一扇普通门或两扇垂直对齐的活板门。入口开启时,中间列会被临时清空,并在关闭时精确恢复原状。
- 四扇门: 四扇连续的门作为一个宽阔的入口整体打开。中间的两扇门折叠至外侧门后方,保留其可见的铰链方向(左/右),并在关闭时恢复到完全原始的状态。
- 红石支持: 按钮、拉杆、压力板及其他原版信号可控制整个结构。同一游戏刻内多个压力板的变化被视为一次 doorway 操作。
- 潜行绕过: 潜行时交互可直接使用目标方块,而不联动其邻居方块。
- 安全开口: 临时通行空间受到保护,防止被放置方块、破坏、活塞、流体、下落方块以及重叠的联动结构干扰。
- 崩溃安全恢复: 三门和四门的变换状态会在方块移动前记录,并提供自动备份及管理员恢复命令。
- 兼容原版客户端: Doorchestra 不添加任何自定义方块、物品或网络数据包。
大型入口的工作原理
三扇门
有效的三扇入口形成一个连续的、宽三格高两格的正面:
- 两侧的外侧方块为兼容的普通门;
- 中间部分为一扇兼容的普通门或两扇垂直对齐的活板门;
- 每个面板均朝向同一立面。
打开任一成员将同时打开两扇外门,并临时移除中间列,且不掉落物品或产生破坏粒子。关闭入口时将恢复保存的中间列状态。
四扇门
有效的四扇入口包含四扇关闭的、完整的、朝向一致的普通门。最左侧的外门必须使用左铰链,最右侧的外门必须使用右铰链;中间的两扇门可使用任意铰链组合。
开启时,内侧的门会移动到外侧门的后方。其原始的左右方向保持不变,所有原始的朝向和铰链属性在关闭时恢复。如果目标位置存在方块,Doorchestra 绝不会覆盖它,并在可能时安全地回退到较小的匹配模式。
安装
Doorchestra 需要以下依赖:
下载与你的 Minecraft 版本匹配的 JAR 文件,并将其与上述两个必需的 Fabric 依赖一起放入 mods 目录。
| Minecraft |
Java |
Doorchestra 文件 |
| 1.21.11 |
21 或更高 |
doorchestra-1.0+mc1.21.11.jar |
| 26.1.x |
25 或更高 |
doorchestra-1.0+mc26.1.jar |
| 26.2.x |
25 或更高 |
doorchestra-1.0+mc26.2.jar |
每个 Minecraft 版本行对应其独立的 JAR 文件。请勿在不同版本间混用 JAR 文件。
配置
首次启动将创建:
config/doorchestra.json
配置文件控制双扇门、联动的活板门、联动的栅栏门、三扇门、四扇门、红石联动、材质匹配、朝向与铰链规则,以及临时开口的保护。
编辑文件后,无需重启即可重新加载:
/doorchestra reload
管理与恢复
Doorchestra 通常会自动恢复活动结构。操作员可以使用以下命令检查或修复异常情况:
/doorchestra status
/doorchestra repair
/doorchestra recover list
/doorchestra recover inspect <id>
/doorchestra recover repair <id>
/doorchestra recover unlock <id>
恢复过程绝不会覆盖未知方块。紧急 unlock 需要显式确认,且仅移除选定的保护记录,不改变世界中的方块。
活动的恢复数据存储在世界的以下位置:
data/doorchestra-openings.json
系统会自动保留最后一个健康文件的 .bak 副本。
兼容性
- Minecraft Java Edition 1.21.11, 26.1.x 和 26.2.x
- Fabric
- 专用服务器和单人游戏
- 无需多人游戏客户端安装
- 无需自定义客户端资源包或网络协议
简体中文说明
Doorchestra 是一个纯服务端 Fabric 门联动模组,让双开门、三开门和四开门
作为一个完整结构同步开关,同时支持成对活板门、栅栏门、红石和压力板。
在专用服务器上只需服务端安装,玩家客户端不需要安装;单人游戏需要把模组
装入客户端实例,因为功能实际运行在集成服务器中。
主要功能:
- 同步开关双门、成对活板门和栅栏门;
- 三开门支持中间普通门或上下两个对齐的活板门;
- 四开门会把两扇中门临时折叠到外门后方,并在关闭时精确恢复;
- 支持按钮、拉杆、压力板等原版红石信号;
- 潜行交互可临时绕过联动;
- 防止临时通道被方块、活塞、流体或下落方块占据;
- 三门和四门具有持久化记录、备份和管理员恢复命令;
- 不添加自定义方块、物品或网络数据包。
安装时请选择对应 Minecraft 版本的 JAR,并同时安装 Fabric API 与 Fabric
Language Kotlin。配置文件位于 config/doorchestra.json,修改后可以使用
/doorchestra reload 热重载。
Doorchestra
Make every entrance move as one.
Doorchestra is a server-side Fabric mod that synchronizes double, triple, and
quad doors while keeping their behavior close to vanilla Minecraft. It also
links matching trapdoors and fence gates, supports redstone and pressure plates,
and lets players temporarily bypass linking by sneaking.
Dedicated server: install Doorchestra only on the server. Connecting
players do not need the mod.
Singleplayer: install Doorchestra in the client instance because
singleplayer runs through Minecraft's integrated server.
Features
- Double doors: open or close two matching doors together.
- Linked trapdoors and fence gates: matching adjacent pairs move together.
- Triple doors: use two outer doors with either a center door or two
vertically aligned trapdoors. The center column temporarily clears while the
entrance is open and is restored exactly when it closes.
- Quad doors: four continuous doors open as one wide entrance. The two
center doors fold behind the outer doors, preserve their visible handedness,
and return to their exact original states on close.
- Redstone support: buttons, levers, pressure plates, and other vanilla
signals operate the whole structure. Multiple pressure plates changing in the
same game tick are handled as one doorway.
- Sneak to bypass: interact while sneaking to use the targeted block without
linking its neighbors.
- Safe openings: temporary passage cells are protected from placement,
breaking, pistons, fluids, falling blocks, and overlapping linked structures.
- Crash-safe recovery: triple and quad transformations are recorded before
blocks move, with automatic backup and administrator recovery commands.
- Vanilla clients: Doorchestra adds no custom blocks, items, or network
packets.
How the larger entrances work
Triple doors
A valid triple entrance forms one continuous three-block-wide, two-block-high
face:
- the two outer blocks are compatible ordinary doors;
- the center is either one compatible ordinary door or two vertically aligned
trapdoors;
- every panel is aligned to the same facade.
Opening any member opens both outer doors and temporarily removes the center
column without drops or breaking particles. Closing the entrance restores the
saved center states.
Quad doors
A valid quad entrance contains four closed, complete, co-facing ordinary doors.
The outer-left door must use a left hinge and the outer-right door a right hinge;
the two inner hinges may use any combination.
When opened, the inner doors relocate behind the outer doors. Their original
handedness remains visible, and all original facing and hinge properties are
restored on close. If a destination contains a block, Doorchestra never
overwrites it and safely falls back to a smaller matching pattern when possible.
Installation
Doorchestra requires:
Download the JAR matching your Minecraft version and place it in the mods
directory together with both required Fabric dependencies.
| Minecraft |
Java |
Doorchestra file |
| 1.21.11 |
21 or newer |
doorchestra-1.0+mc1.21.11.jar |
| 26.1.x |
25 or newer |
doorchestra-1.0+mc26.1.jar |
| 26.2.x |
25 or newer |
doorchestra-1.0+mc26.2.jar |
Each Minecraft line uses its own JAR. Do not use one version's JAR on another
line.
Configuration
The first launch creates:
config/doorchestra.json
The configuration controls double doors, linked trapdoors, linked fence gates,
triple doors, quad doors, redstone linking, material matching, facing and hinge
rules, and protection of temporary openings.
After editing the file, reload it without restarting:
/doorchestra reload
Administration and recovery
Doorchestra normally restores active structures automatically. Operators can
inspect or repair exceptional cases with:
/doorchestra status
/doorchestra repair
/doorchestra recover list
/doorchestra recover inspect <id>
/doorchestra recover repair <id>
/doorchestra recover unlock <id>
Recovery never overwrites an unknown block. Emergency unlock requires an
explicit confirmation and removes only the selected protection record without
changing world blocks.
Active recovery data is stored in the world at:
data/doorchestra-openings.json
A .bak copy of the last healthy file is retained automatically.
Compatibility
- Minecraft Java Edition 1.21.11, 26.1.x, and 26.2.x
- Fabric
- Dedicated servers and singleplayer
- No multiplayer client installation required
- No custom client resource pack or networking protocol
简体中文说明
Doorchestra 是一个纯服务端 Fabric 门联动模组,让双开门、三开门和四开门
作为一个完整结构同步开关,同时支持成对活板门、栅栏门、红石和压力板。
在专用服务器上只需服务端安装,玩家客户端不需要安装;单人游戏需要把模组
装入客户端实例,因为功能实际运行在集成服务器中。
主要功能:
- 同步开关双门、成对活板门和栅栏门;
- 三开门支持中间普通门或上下两个对齐的活板门;
- 四开门会把两扇中门临时折叠到外门后方,并在关闭时精确恢复;
- 支持按钮、拉杆、压力板等原版红石信号;
- 潜行交互可临时绕过联动;
- 防止临时通道被方块、活塞、流体或下落方块占据;
- 三门和四门具有持久化记录、备份和管理员恢复命令;
- 不添加自定义方块、物品或网络数据包。
安装时请选择对应 Minecraft 版本的 JAR,并同时安装 Fabric API 与 Fabric
Language Kotlin。配置文件位于 config/doorchestra.json,修改后可以使用
/doorchestra reload 热重载。
评论 0
登录后参与评分
还没有评论,来抢沙发吧