完全客户端模组,能根据您当前的帧率实时自动缩放您的视距。它在性能负载较重的区域保持游戏流畅运行,并在性能允许时让您看得更远。
仅限客户端 — 无需安装服务器端。 适用于单人游戏和任何服务器。
依赖项: Fabric 需要 Fabric API 和 Architectury API。NeoForge 需要 Architectury API。Forge 无需额外依赖项。
免费用于任何整合包 — 无论公开或私有,均无需申请权限。
功能介绍
- 智能缩放 — 自动增加或减少渲染距离,以保持在您期望的 FPS 范围内。
- 一键预设 — 从主设置卡片(或
/drd preset)应用经过调优的 质量 (Quality)、平衡 (Balanced) 或 性能 (Performance) 配置文件。预设仅更改性能设置并保留您的开关状态。 - 可选屏幕 HUD — 一个紧凑的叠加层,显示当前的渲染距离和 FPS,并根据状态进行颜色编码(灰色 = 关闭,红色 = 低于最小 FPS,绿色 = 高于最大 FPS,黄色 = 在范围内)。当 F3 调试屏幕打开时隐藏。
- 可配置限制 — 您可以设置最小和最大区块数,它绝不会超出这些范围。
- 防震荡冷却时间 — 冷却计时器,防止屏幕在距离之间不断闪烁。
- 可重新绑定的按键 — 打开设置(默认
F8)、切换模组开/关或切换 HUD,所有操作均可在 选项 → 控制 下的 Dynamic Render Distance 中重新绑定。 - 游戏内 UI 与命令 — 可以通过设置卡片或聊天命令配置所有内容。
配置
在游戏中按 F8(可重新绑定)或使用 /drd open 打开设置菜单。
主屏幕是一个单独的卡片:启用、实时状态、FPS/区块规则、模式(质量 / 平衡 / 性能 + 自定义)、显示 HUD、高级... 以及重置 / 完成 / 取消。每个单独的设置,包括显示消息,都位于 高级设置 下。预设和重置会就地更新打开的卡片;值仅在 完成 时保存(取消 / Esc 丢弃)。选择预设时会显示操作栏提示:Selected %s preset — press Done to save。
可用设置(括号内为默认值):
- 启用 (ON) — 完全切换模组。
- 显示消息 (ON) — 渲染距离更改时的操作栏通知(高级)。
- 显示 HUD (OFF) — 左上角叠加层,显示当前渲染距离和 FPS。
- 最小 FPS (
45) / 最大 FPS (75) — 降低或提高渲染距离的阈值。 - 最小 RD (
6) / 最大 RD (32) — 允许的渲染距离范围(以区块为单位)。 - 减小步长 (
2) / 增加步长 (1) — 每次调整移除或添加的区块数。 - 检查间隔 (
5.0s) — 检查平均 FPS 的频率。 - 冷却时间 (
10.0s) — 在一次更改后再次调整前等待的时间。
工作原理: 模组每秒采样 FPS 并保持一个平均窗口。在每个检查间隔,如果平均 FPS 低于最小 FPS,则降低渲染距离;如果高于最大 FPS,则提高渲染距离,然后应用冷却时间。默认情况下,它降低的速度比增加得快,因此卡顿的区域会首先稳定下来。每次调整都是单步执行的:Minecraft 会在每次渲染距离更改时重建区块,因此逐步调整只会导致更多的闪烁。
按键绑定(选项 → 控制 → Dynamic Render Distance):
- 打开配置 — 默认
F8。 - 切换模组开/关 — 默认未绑定。
- 切换 HUD — 默认未绑定。
命令 (/dynamicrenderdistance 或 /drd):
/drd status— 当前统计信息。/drd preset performance— 应用预设。- 设置子命令 (
enabled,showHud,minFps, …) 在不带参数时打印存储的值;传入值以设置它(例如/drd minFps 60,/drd showHud true,/drd cooldown 15)。
详情
- 仅限客户端 — 在任何原版或模组化服务器上都是安全的。
- 所有设置都本地存储在
config/dynamicrenderdistance.json中;整合包可以附带预配置的文件。 - 手动输入的
checkIntervalSeconds或cooldownSeconds中的非数值将回退到默认值(5 和 10 秒)。 - 完全翻译成 10 种语言;UI 字符串可以通过资源包下的
assets/dynamicrenderdistance/lang/进行覆盖。
反馈
请在 Discord 上报告任何错误、错误或功能建议:
Nikrecs 的其他模组: PerformanceHUD · AutoMuteOnAfk
我推荐的其他模组。
Fully client-side mod that automatically scales your view distance up or down in real time based on your current frame rate. It keeps your game running smoothly in heavy areas and lets you see further when performance allows it.
Client-side only — no server installation required. Works in singleplayer and on any server.
Dependencies: Fabric needs Fabric API and Architectury API. NeoForge needs Architectury API. Forge needs no additional dependencies.
Free to use in any modpack — public or private, no permission needed.
What it does
- Smart Scaling — automatically increases or decreases render distance to stay within your desired FPS range.
- One-Click Presets — apply a tuned Quality, Balanced, or Performance profile from the main settings card (or
/drd preset). Presets only change performance settings and keep your toggles. - Optional On-Screen HUD — a compact overlay showing your current render distance and FPS, color-coded by status (grey = off, red = below your min FPS, green = above your max FPS, yellow = in range). Hidden while the F3 debug screen is open.
- Configurable Limits — you set the minimum and maximum chunks, and it never goes below or above them.
- Anti-Oscillation Cooldowns — cooldown timers so your screen doesn't constantly flicker between distances.
- Rebindable Keybinds — open the settings (default
F8), toggle the mod on/off, or toggle the HUD, all rebindable in Options → Controls under Dynamic Render Distance. - In-Game UI & Commands — configure everything from the settings card or chat commands.
Configuration
Press F8 in-game (rebindable) or use /drd open to open the settings menu.
The main screen is a single card: Enabled, live status, FPS/chunk rule, Mode (Quality / Balanced / Performance + Custom), Show HUD, Advanced..., and Reset / Done / Cancel. Every individual setting, including Show Messages, is under Advanced settings. Preset and Reset update the open card in place; values save only on Done (Cancel / Esc discard). Picking a preset shows an action-bar hint: Selected %s preset — press Done to save.
Available settings (defaults in parentheses):
- Enabled (ON) — toggle the mod entirely.
- Show Messages (ON) — action-bar notification when render distance changes (Advanced).
- Show HUD (OFF) — top-left overlay with current render distance and FPS.
- Min FPS (
45) / Max FPS (75) — thresholds that lower or raise render distance. - Min RD (
6) / Max RD (32) — allowed render distance range in chunks. - Decrease Step (
2) / Increase Step (1) — chunks removed or added per adjustment. - Check Interval (
5.0s) — how often to check the average FPS. - Cooldown (
10.0s) — wait after a change before adjusting again.
How it works: the mod samples FPS every second and keeps an average window. On each check interval it lowers render distance if average FPS is below Min FPS, raises it if above Max FPS, then applies a cooldown. By default it decreases faster than it increases, so laggy areas stabilize first. Each adjustment is a single step: Minecraft rebuilds chunks on every render-distance change, so gradual steps would only flicker more.
Keybinds (Options → Controls → Dynamic Render Distance):
- Open config — default
F8. - Toggle the mod on/off — unbound by default.
- Toggle the HUD — unbound by default.
Commands (/dynamicrenderdistance or /drd):
/drd status— current stats./drd preset performance— apply a preset.- Setting subcommands (
enabled,showHud,minFps, …) print the stored value with no argument; pass a value to set it (e.g./drd minFps 60,/drd showHud true,/drd cooldown 15).
Details
- Client-side only — safe on any vanilla or modded server.
- All settings are stored locally in
config/dynamicrenderdistance.json; modpacks can ship a preconfigured file. - A non-numeric value typed by hand into
checkIntervalSecondsorcooldownSecondsfalls back to the default (5 and 10 seconds). - Fully translated into 10 languages; UI strings can be overridden via a resource pack under
assets/dynamicrenderdistance/lang/.
Feedback
Please report any bugs, errors, or feature suggestions on Discord:
More mods by Nikrecs: PerformanceHUD · AutoMuteOnAfk
My other mods that I recommend.
下载 DynamicRenderDistance
下载 DynamicRenderDistance
下载 DynamicRenderDistance
下载 DynamicRenderDistance
下载 DynamicRenderDistance
下载 DynamicRenderDistance
下载 DynamicRenderDistance
下载 DynamicRenderDistance
下载 DynamicRenderDistance
下载 DynamicRenderDistance
Dynamic Render Distance 1.3.1
Added
- Forge 1.16.5 (Forge 36.2.42+, Java 8)。仅客户端,拥有与其他版本相同的设置界面、HUD、按键绑定、/drd 命令和 JSON 配置文件。无需额外模组。
Changed
- 降低 Fabric 最低要求:1.3.0 要求使用与其编译时对应的 Fabric Loader 和 Fabric API 构建版本(例如在 1.20.1 上需要 Fabric Loader 0.18.4 和 Fabric API 0.92.7)。1.3.1 仅需每个支持的 Minecraft 版本线的最旧构建版本即可。
- Fabric 26.1.2 现在需要 Fabric Loader 0.19.5 或更高版本:Architectury API 20.1.14 在较旧的加载器上会导致游戏启动崩溃。
- Forge 现在从每条线的第一个推荐构建版本开始(43.1.0, 47.1.0, 61.1.0),而不再接受所有构建版本,包括测试版。
- Forge 1.21.1 现在需要 Forge 52.1.2 或更高版本:在较旧的 52.x 构建版本中,该模组无法注册其 HUD。如果游戏提示该模组需要更高版本,请更新 Forge。
Fixed
- 在 config/dynamicrenderdistance.json 的 checkIntervalSeconds 或 cooldownSeconds 中手动输入的 NaN 值不再导致保存失败。之前,通过设置界面、预设、切换键或 /drd 进行的下一次更改会因错误而失败,并导致配置文件截断。此类值现在将回退到默认值(5 秒和 10 秒)。
- Minecraft 1.21.11 在 Forge 和 NeoForge 上:每次加载世界时,日志不再显示“Couldn't load mod/dynamicrenderdistance pack metadata”。
Unchanged
- 无游戏玩法变更:渲染距离逻辑、HUD、设置界面、按键绑定、/drd 和配置文件的工作方式与 1.3.0 完全相同。
- 1.3.0 支持的所有 Minecraft 版本和加载器仍然可用。未移除任何内容。
Compatibility
- 仅客户端:服务器不需要它。
- Fabric 需要 Fabric API 和 Architectury API,NeoForge 需要 Architectury API,Forge 只需要 Forge 本身。
| Minecraft | Fabric Loader | Fabric API | Architectury API | Forge | NeoForge |
|---|---|---|---|---|---|
| 1.16.5 | – | – | – | 36.2.42+, below 37 | – |
| 1.19.2 | 0.14.9+ | 0.66.0+1.19.2 | 6.6.92+, below 7 | 43.1.0+, below 44 | – |
| 1.20.1 | 0.14.21+ | 0.83.0+1.20.1 | 9.2.14+, below 10 | 47.1.0+, below 48 | – |
| 1.21.1 | 0.15.11+ | 0.102.0+1.21.1 | 13.0.11+, below 14 | 52.1.2+, below 53 | 21.1.1+, below 21.2 |
| 1.21.11 | 0.17.3+ | 0.139.4+1.21.11 | 19.0.1+, below 20 | 61.1.0+, below 62 | 21.11.0-beta+, below 21.12 |
| 26.1.2 | 0.19.5+ | 0.154.0+26.1.2 | 20.1.14+, below 21 | – | 26.1.2.99+, below 26.2 |
| 26.2 | 0.19.3+ | 0.154.0+26.2 | 21.0.7+, below 22 | – | 26.2.0.40-beta+, below 26.3 |
| 26.3 | 0.19.5+ | 0.160.5+26.3 | 22.0.1+, below 23 | – | 26.3.0.0-beta+, below 26.4 |
仅在 Fabric 和 NeoForge 上需要 Architectury API。
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
模组
显示你正在注视的方块的信息。(适用于 Minecraft 1.16+ 的 Hwyla/Waila 分支)
模组
使用 JavaScript 编辑配方、添加自定义物品、编写世界事件!
模组
查看物品与配方
模组
在游戏画面角落显示附近世界地形、玩家、生物和实体的地图。可创建路径点,帮助你找到标记过的位置。
模组
AE2:一款流行的自动化与存储模组
模组
那是什么?一个 Waila/Hwyla 的分支。
评论 0
登录后参与评分
还没有评论,来抢沙发吧