关于
是否曾想过在方块之间进行交换/互换,而不是手动破坏和放置方块?现在,你有了完美的解决方案!
Exchangers 是一款以科技为主题的 gadget(小工具)模组,灵感源自 EnderTech 中的 Block Exchangers(EnderTech 是一款基于 Thermal Expansion 的 1.7.10 版本科技模组,目前已停止维护。本模组未使用 EnderTech 的任何源代码,所有代码均已从头重写,并加入了 EnderTech 原版 Block Exchangers 中不存在的新功能)。
本模组提供了多种不同的方块交换机,从基于原版(使用耐久度)到支持四大主流科技模组(Ender IO(含 Ender IO Endergy)、Thermal Expansion、Mekanism 和 Immersive Engineering)!其他模组的兼容性将根据请求陆续添加。
为了提供线性的进度平衡,所有的交换机均为阶梯式升级。你必须从上一级升级到更高级别(配方可在配置文件中自定义),才能获得性能更优的交换机!
本模组目前支持 Minecraft 1.10 - 1.12、1.16、1.18 - 1.20!
本模组仅支持 Forge。不支持 Fabric 等其他加载器,且很可能永远不会支持。主要原因是 Forge 是 Minecraft 占主导地位的开发 API,同时维护单个模组的多个不同加载器版本极其耗时。我是一名全职计算机工程师,没有足够的时间来做这件事。
注意:对于 1.12 版本的 Exchangers 2.1 至 2.9 版本,如果你想使用任何基于能量的交换机,需要安装 Redstone Flux
从 1.12 版本的 Exchangers 2.10 开始,我们已完全迁移至使用 Forge Energy (FE),因此不再需要 Redstone Flux 模组。
从 1.12 版本的 Exchangers 2.9 开始,GunpowderLib 是本模组的必需依赖项。
交换机变体
块茎蜂箱、蜜蜂和创造模式
蜜蜂交换机于 3.1.2 (1.16)、3.2.1 (1.18) 和 3.3.2 (1.19.2 & 1.19.4) 版本中添加

- 7 种适用于 1.10 / 1.12 / 1.20 的 Ender IO 交换机变体(使用 Forge Energy / RF):
导电、脉动、电工钢、活力、暗钢、鲜艳和末地钢
电工钢交换机仅在 1.10 和 1.12 版本中可用
末地钢交换机为 1.12+ 独占
铜合金交换机于 1.20 版本添加,其等级位于导电交换机之前
1.12 版本至少需要 2.7 版才能正确支持 Ender IO,低于该版本的模组均不受支持,且极有可能导致崩溃

- 适用于 1.12 的 6 种 Ender IO Endergy 转换器变体(使用 Forge Energy / RF):
- 适用于 1.10 - 1.12 / 1.16 / 1.18 / 1.19.2 的 5 种 Thermal 转换器变体(使用 Forge Energy / RF):
- 适用于 1.10 - 1.12 / 1.16 / 1.18 / 1.19.2 的 4 种 Mekanism 转换器变体(使用 Forge Energy / RF):
- 适用于 1.10 - 1.12 / 1.16 / 1.18 / 1.19.2 / 1.19.4 的 3 种 Immersive Engineering 转换器变体(使用 Forge Energy / RF):
LV、MV 和 HV
Immersive Engineering 支持自 1.12 的 2.5 版本或 1.10 / 1.11 的 1.6 版本起添加

有关每个转换器的更多信息,请查看 FTB wiki!
功能
- 所有转换器(仅限 1.10 - 1.12)/ 能量容量可配置(特殊变体除外)
- 所有基于能量的转换器每块方块的能量消耗可配置
- 所有基于能量的转换器均支持 Forge Energy (FE)
- 所有基于原版转换器的可以使用正确的材料在铁砧中进行修复
- 常规转换器可根据等级交换最大 15x15 的区域。创造模式转换器可交换最大 25x25 的区域(从 1.10 / 1.11 的 1.8.3 版本或 1.12 的 1.7.3 版本起可通过配置文件进行配置)
- 提供调整配方难度的选项,共有三种难度:简单、普通和困难,默认选项为普通,整合包制作者可以选择任何预设或使用 CraftTweaker 制作自己的配方
- 准星旁边显示当前转换器区域的指示器
- 游戏内配置 GUI,无需手动查找并编辑配置文件(仅适用于 1.10 - 1.12;如需在 1.16 及以上版本恢复此功能,请使用 Configured 模组)
- 交换器的游戏内 GUI,自 1.12.2 的 2.10 版本起添加,默认绑定至“逗号”键,允许在不使用多个按键绑定的情况下动态配置交换器
- 易于增加/减少交换范围(按下范围切换键可增加范围,按住潜行 + 按下范围切换键可减少范围)
- 强制掉落物品模式:即使背包有空间也强制将物品掉落在地上(可通过按键绑定或 GUI 切换)
- 定向放置模式:允许交换器忽略其保存的方块状态,并根据玩家朝向进行方块交换(可通过按键绑定或 GUI 切换)
- 虚空物品模式:允许所有交换出的物品被虚空销毁(可通过按键绑定或 GUI 切换)
- 模糊放置模式:允许交换器按一定百分比概率放置方块,放置几率可在 GUI 中设置
- 3 种不同的交换模式:平面、水平列和垂直列(可通过模式切换键或 GUI 在这些模式间切换)
- 采集等级门控系统,升级交换器时其采集等级也会提升
- 支持物品容器(仅限实现了 IItemHandler 能力的物品容器,如 /dank/null 和 Bag of Holding),当玩家主背包中没有方块时,交换器可以从物品容器中抽取方块
- 精准采集模式的配置选项,默认启用
- 附魔支持:如果禁用精准采集模式,玩家可以使用精准采集附魔交换器以实现精准采集效果,或使用fortune附魔以获得额外掉落。对于基于能量的交换器,还支持储存附魔(增加能量容量)和耐久附魔(降低每消耗一个方块时的能量损耗概率)
模组亮点展示
如果你想为 Exchangers 制作模组亮点展示视频,欢迎随时制作!如果你希望你的视频被列入下方列表,请告诉我!
Bug 反馈 / 功能请求
请通过 GitHub Issue 追踪器 提交任何 Bug 报告或功能请求。
源代码 & 许可证
联系我
支持开发
如果你喜欢这个模组并希望支持我的模组开发,可以考虑打赏!每一份打赏都备受感激!
>>点击此处通过 Streamlabs 打赏<<
>>点击此处通过 Ko-fi 打赏<<
除了打赏,你也可以通过在 Patreon 或 Twitch 上订阅来支持我!
>>在 Patreon 上订阅<<
>>在 Twitch 上订阅<<
特别感谢
使用
翻译 x
<input id="LanguageMenu_svid" style="display: none;" autocomplete="on" name="LanguageMenu_svid" type="text" value="en"> <input id="LanguageMenu_textid" style="display: none;" autocomplete="on" name="LanguageMenu_textid" type="text">
英语
使用
![]()
翻译
复制下方链接
<input id="ShareTextbox" name="ShareTextbox" readonly="readonly" type="text">
![]()
返回
<input id="EmailSubject" name="EmailSubject" type="hidden" value="Check out this page in {0} translated from {1}"> <input id="EmailBody" name="EmailBody" type="hidden" value="Translated: {0}%0d%0aOriginal: {1}%0d%0a%0d%0aAutomatic translation powered by Microsoft® Translator%0d%0ahttp://
" rel="noopener nofollow" target="_blank">www.bing.com/translator?ref=MSTWidget"> <input id="ShareHelpText" type="hidden" value="This link allows visitors to launch this page and automatically translate it to {0}.">
将以下代码嵌入您的网站 ![]()
<input id="EmbedSnippetTextBox" name="EmbedSnippetTextBox" readonly="readonly" type="text" value="<div id='MicrosoftTranslatorWidget' class='Dark' style='color:white;background-color:#555555'></div>">
About
Ever wanted to exchange / swap between blocks rather than manually breaking and placing blocks? Well, now you have a solution!
Exchangers is a tech-themed gadget mod inspired by the Block Exchangers from EnderTech (EnderTech is a Thermal Expansion-based tech mod for 1.7.10 and it has been discontinued, this mod is not using any source codes from EnderTech, everything has been rewritten from the ground up with additional features that are not present in EnderTech's version of Block Exchangers).
This mod offers many different block Exchangers, from vanilla-based (uses durability), to supporting the 4 major tech mods (Ender IO (and Ender IO Endergy), Thermal Expansion, Mekanism and Immersive Engineering)! Support for other mods will be added as per request.
As for balancing purpose to provide a linear progression, all of the Exchangers are tier-based, you have to upgrade from the previous tier to a higher tier (recipes configurable in config) in order to obtain a better Exchanger!
This mod is currently available for 1.10 - 1.12, 1.16, 1.18 - 1.20!
This mod is only available for Forge, other mod loaders like Fabric are not supported and will likely never be supported, mainly due to Forge being the dominant modding API for Minecraft, and it is extremely time consuming to maintain multiple different mod loader versions of a single mod. I have a full time job as a computer engineer and I do not have the time for this.
Note: From version 2.1 to 2.9 of Exchangers for 1.12, Redstone Flux is required if you want to use any Energy-based Exchangers
Starting from version 2.10 of Exchangers for 1.12, we've fully migrated to use Forge Energy, thus the Redstone Flux mod is no longer needed
Starting from version 2.9 of Exchangers for 1.12, GunpowderLib is a required dependency for this mod.
Exchanger Variants
- 11 different vanilla exchanger variants (uses durability):
- 3 different special exchanger variants:
Tuberous, Bee and Creative
Bee Exchanger was added in version 3.1.2 (1.16), 3.2.1 (1.18) and 3.3.2 (1.19.2 & 1.19.4)

- 7 different Ender IO exchanger variants available for 1.10 / 1.12 / 1.20 (uses Forge Energy / RF):
Conductive, Pulsating, Electrical Steel, Energetic, Dark Steel, Vibrant and End Steel
Electrical Steel Exchanger is only available on 1.10 and 1.12
End Steel Exchanger is 1.12+ exclusive
Copper Alloy Exchanger was added for 1.20 to be tiered before Conductive Exchanger
1.12 Requires at least version 2.7 to have proper Ender IO support, any versions below are not supported and will most likely crash

- 6 different Ender IO Endergy exchanger variants available for 1.12 (uses Forge Energy / RF):
- 5 different Thermal exchanger variants available for 1.10 - 1.12 / 1.16 / 1.18 / 1.19.2 (uses Forge Energy / RF):
- 4 different Mekanism exchanger variants available for 1.10 - 1.12 / 1.16 / 1.18 / 1.19.2 (uses Forge Energy / RF):
- 3 different Immersive Engineering exchanger variants available for 1.10 - 1.12 / 1.16 / 1.18 / 1.19.2 / 1.19.4 (uses Forge Energy / RF):
LV, MV, and HV
Immersive Engineering support was added since 2.5 for 1.12 or 1.6 for 1.10 / 1.11

For more informations about each Exchangers, go check out FTB wiki!
Features
- Configurable durability (1.10 - 1.12 only) / Energy capacity for all exchangers (except the special variants)
- Configurable Energy usage per block for all Energy-based exchangers
- All Energy-based exchangers supports Forge Energy (FE)
- All vanilla-based exchangers can be repaired with the correct materials in Anvil
- Regular Exchangers can exchange up to a 15x15 area, depending on the tier. Creative Exchanger can exchange up to 25x25 area (Configurable via config as of 1.8.3 for 1.10 / 1.11 or 1.7.3 for 1.12)
- Config options to tweak recipe difficulties, there are 3 difficulties: easy, normal and hard, normal is the default option, modpack makers can choose whatever preset they want or use CraftTweaker to make their own recipes
- Indicators for the current exchanger area next to crosshair
- In-game config GUI, without the need of going to find and edit the config file manually (1.10 - 1.12 only, please use the Configured mod to restore this functionality on 1.16 and above!)
- In-game GUI for exchangers, added as of version 2.10 for 1.12.2, binded to "comma" by default, allows exchangers to be configured on the fly without using multiple keybinds
- Easy to increase / decrease exchange range (Pressing the Range Switch key increases range and holding sneak + pressing Range Switch key decreases range)
- Force Drop Items mode: Forces items to drop on the floor even if there's inventory space (Can be toggled via keybind or via GUI)
- Directional Placement mode: Allows exchangers to ignore their saved block states and swap blocks based on player facing direction instead (Can be toggled via keybind or via GUI)
- Void Items mode: Allows all exchanged items to be voided (Can be toggled via keybind or via GUI)
- Fuzzy Placement mode: Allows exchangers to place blocks on a percentage basis, placement chance can be set within the GUI
- 3 different exchange modes: Plane, Horizontal Column and Vertical Column (You can switch between them using the Mode Switch key or with the GUI)
- Harvest level gating system, harvest level on Exchangers goes up whenever you upgrade
- Item containers support (only for item containers with IItemHandler capability implemented, such as /dank/null and Bag of Holding), Exchangers are able to pull blocks from item containers if there's no blocks in players' main inventory
- Config option for Silk Touch mode, enabled by default
- Enchantments support, if Silk Touch mode is disabled, players may enchant the Exchangers with Silk Touch to achieve Silk Touching on Exchangers or Fortune to get additional drops. There's also support for Holding enchant (increases Energy capacity) and Unbreaking enchant (reduces chance of consuming Energy per block) for Energy-based Exchangers
Mod Spotlights
If you would like to make a mod spotlight video for Exchangers, feel free to! Also let me know if you would like your video to be listed below!
Bugs / Feature Requests
Please submit any bug reports or feature requests through the GitHub issue tracker.
Source Code & License
- This mod is Open-Source.
- You can find the source code on GitHub.
- This mod is under Jacky's Minecraft Mods License.
- Feel free to this mod in any modpacks on any launchers you like as long as it's an original unmodified version of my mod sourced from CurseForge or GitHub.
Contact Me
Support the development
If you enjoy this mod and would like to support my mod development, consider tipping! Every tips are always appreciated!
>>Click here to tip via Streamlabs<<
>>Click here to tip via Ko-fi<<
Other than tipping, you may also support me by subscribing on Patreon or Twitch!
>>Subscribe on Patreon<<
>>Subscribe on Twitch<<
Special Thanks
- TurkeyDev and ThatGamerBlue for helping me to make this mod
- Shadows_of_Fire for the mod's 2.0 rewrite after Forge registry rewrite
- JCOnline for making the logo of the mod
- ColossalPercy for making all the item textures
- These awesome people for helping out: XaviorDD1st, sokratis12GR
- Minecraft modders from various different Discord servers
TRANSLATE with
x
<input id="LanguageMenu_svid" style="display: none;" autocomplete="on" name="LanguageMenu_svid" type="text" value="en"> <input id="LanguageMenu_textid" style="display: none;" autocomplete="on" name="LanguageMenu_textid" type="text">
English
TRANSLATE with
![]()
COPY THE URL BELOW
<input id="ShareTextbox" name="ShareTextbox" readonly="readonly" type="text">
![]()
Back
<input id="EmailSubject" name="EmailSubject" type="hidden" value="Check out this page in {0} translated from {1}"> <input id="EmailBody" name="EmailBody" type="hidden" value="Translated: {0}%0d%0aOriginal: {1}%0d%0a%0d%0aAutomatic translation powered by Microsoft® Translator%0d%0ahttp://
" rel="noopener nofollow" target="_blank">www.bing.com/translator?ref=MSTWidget"> <input id="ShareHelpText" type="hidden" value="This link allows visitors to launch this page and automatically translate it to {0}.">
EMBED THE SNIPPET BELOW IN YOUR SITE ![]()
<input id="EmbedSnippetTextBox" name="EmbedSnippetTextBox" readonly="readonly" type="text" value="<div id='MicrosoftTranslatorWidget' class='Dark' style='color:white;background-color:#555555'></div>">
评论 0
登录后参与评分
还没有评论,来抢沙发吧