EyeVector
通过三角测量精确找到要塞!
EyeVector 是一款客户端 Fabric 模组,通过分析末影眼的投掷轨迹来计算要塞的精确坐标。不再需要猜测或无休止地挖掘——只需投掷、测量并定位!
✨ 功能特性
- ? 精确三角测量 - 使用数学三角测量法计算要塞坐标
- ⚙️ 可配置模式 - 在 2 点(快速)或 3 点(高精度)测量模式之间选择
- ?️ 可调精度 - 平衡性能与准确性(低/中/高)
- ? 灵活距离设置 - 设置测量之间的最小距离(16-500 格)
- ?️ 仅客户端 - 无需安装服务器端组件
? 工作原理
- 投掷 第一颗末影眼到第一个位置
- 移动 至少 30 格远(或你配置的距离)
- 投掷 另一颗末影眼
- 完成! 模组会在聊天栏显示要塞坐标
为了获得最大精度,请启用 3 点模式并从不同位置投掷第三颗末影眼。
? 命令
所有命令均以 /eyevector 开头:
| 命令 |
描述 |
/eyevector mode <2|3> |
设置测量模式(2 点或 3 点) |
/eyevector distance <16-500> |
设置投掷之间的最小距离 |
/eyevector precision <low|medium|high> |
设置精度等级 |
/eyevector reset |
清除已记录的测量数据 |
/eyevector status |
显示当前设置 |
/eyevector |
显示帮助信息 |
? 精度设置
为你的系统选择合适的平衡点:
- Low(低) - 最少 3 个样本(减少卡顿,精度较低)
- Medium(中) - 最少 5 个样本(默认,平衡)
- High(高) - 最少 10 个样本(更精确,稍多处理开销)
? 提示
- 间距很重要 - 你的投掷点相距越远,结果越准确
- 使用 3 点模式 - 当对精度要求极高时可获得最大准确性
- 调整距离 - 较小的最小距离更方便,较大的距离更精确
- 中等精度 - 适合大多数玩家;仅在必要时更改
? 技术细节
- 算法:使用参数方程进行直线相交计算
- 角度计算:多tick 轨迹采样结合圆形平均值
- 坐标系:X/Z 平面计算以实现精确的 2D 定位
- 性能:优化的实体追踪与可配置的采样率
? 语言支持
- English (en_us)
- Korean (ko_kr)
所有消息、命令和工具提示均已完整翻译!
? 许可证
MIT License - 免费且开源!
发现 bug? 请在 GitHub 上报告
EyeVector
Find strongholds with precision using triangulation!
EyeVector is a client-side Fabric mod that calculates exact stronghold coordinates by analyzing the trajectory of thrown Eyes of Ender. No more guessing or endless digging - just throw, measure, and locate!
✨ Features
- ? Precise Triangulation - Uses mathematical triangulation to calculate stronghold coordinates
- ⚙️ Configurable Modes - Choose between 2-point (fast) or 3-point (accurate) measurement
- ?️ Adjustable Precision - Balance between performance and accuracy (Low/Medium/High)
- ? Flexible Distance - Set minimum distance between measurements (16-500 blocks)
- ?️ Client-side Only - No server-side installation required
? How It Works
- Throw an Eye of Ender at your first location
- Travel at least 30 blocks away (or your configured distance)
- Throw another Eye of Ender
- Done! The mod displays stronghold coordinates in chat
For maximum accuracy, enable 3-point mode and throw a third Eye of Ender from a different location.
? Commands
All commands start with /eyevector:
| Command |
Description |
/eyevector mode <2|3> |
Set measurement mode (2 or 3 points) |
/eyevector distance <16-500> |
Set minimum distance between throws |
/eyevector precision <low|medium|high> |
Set precision level |
/eyevector reset |
Clear recorded measurements |
/eyevector status |
Show current settings |
/eyevector |
Show help |
? Precision Settings
Choose the right balance for your system:
- Low - 3 samples minimum (reduced lag, less accurate)
- Medium - 5 samples minimum (default, balanced)
- High - 10 samples minimum (more accurate, slightly more processing)
? Tips
- Spacing Matters - The further apart your throws, the more accurate the result
- Use 3-Point Mode - For maximum accuracy when precision is critical
- Adjust Distance - Lower minimum distance for convenience, higher for accuracy
- Medium Precision - Perfect for most players; only change if needed
? Technical Details
- Algorithm: Line intersection using parametric equations
- Angle Calculation: Multi-tick trajectory sampling with circular mean
- Coordinate System: X/Z plane calculations for precise 2D positioning
- Performance: Optimized entity tracking with configurable sample rates
? Language Support
- English (en_us)
- Korean (ko_kr)
All messages, commands, and tooltips are fully translated!
? License
MIT License - Free and open source!
Found a bug? Report it on GitHub
评论 0
登录后参与评分
还没有评论,来抢沙发吧