Lumina's Custom:3D 模型
Lumina's Custom 是一款 Minecraft 渲染模组,可将真实的外部 3D 资产加载到游戏中——保留其绑定、骨骼、材质、形变(morphs)以及动画系统。其目的是跳出方块工作流,直接使用源自标准 3D 流程的模型,同时在这个过程中不至于牺牲太多性能。
所有内容都通过预设(preset)系统运行。预设不仅仅是一个模型文件——它是一个完整的包:包含 3D 资产本身、渲染配置、材质、缩放/位置/旋转调整、可选物理效果(仅限 MMD)、动画文件以及与游戏逻辑绑定的动画状态。
因此,预设真正定义的是模型在 Minecraft 中的存在方式,而不仅仅是外观。如果包含动画,预设还会映射哪些剪辑在何种状态下播放。玩家预设会根据实际玩家状态分配行走、冲刺、跳跃、待机、游泳、攻击等动画(未来还将添加更多)。方块预设可以根据红石等级切换动画。实体预设可以根据移动或战斗行为切换剪辑。这使得一切保持模块化且可复用。
现代 3D 格式支持
模组原生支持 FBX 和 GLB 格式,包括其内置的动画系统。这两种格式都能提供稳定的运行时性能,并与现代工具良好兼容,因此在 FPS 与视觉效果同等重要时,它们是首选选择。
也完全支持通过 PMX 和 PMD 格式的 MMD 模型,动画播放由 VMD 文件驱动。这涵盖了复杂的骨骼绑定、高级材质设置、形变系统、高骨骼数量、配件、卡通纹理以及真实的 VMD 播放——基本上,你可以将完整的 MMD 角色放入场景中而不损失保真度,所需的一切这里都有。
还部分支持动画的 重定向(retargeting),因此在一个绑定上制作的剪辑可以复用于另一个绑定,无需从头重新制作。虽然并非在所有绑定组合上都完美无缺,但能覆盖一些常见情况。
基于 Bullet 后端的 MMD 物理效果
由于骨骼数量和物理设置的原因,MMD 模型通常比 FBX 或 GLB 更沉重,因此模组附带了一些设置,允许玩家在自定义 gl 渲染(不支持光影)和光影兼容渲染(性能影响较大,但支持 Iris 光影)之间进行选择。它还附带了基于 Bullet Physics 的布料模拟,以正确处理裙子、长发、配件和其他软体细节。
对于较重的场景,这些模拟可以 烘焙并重放,而不是每帧实时求解。你可以在不支付运行时成本的情况下保持外观——这是在较大场景中使复杂角色可行的唯一真正方法。
第三人称玩家替换
一个主要功能:第三人称下的默认 Minecraft 玩家模型可以被完全替换为一个有绑定、有动画的 3D 角色。这不是皮肤替换——而是由 FBX、GLB 或 PMX/PMD+VMD 预设驱动的真正的绑定模型。
游戏状态直接连接到动画播放:行走、冲刺、跳跃、下落、攻击、潜行、游泳、骑乘、待机(未来还将添加更多),以及它们之间的过渡。预设决定哪个剪辑属于哪个状态。
不过,动画系统比“每个状态一个剪辑”更进一步。单个游戏状态可以容纳 多个串联在一起的剪辑——例如,跳跃状态可以播放 jump start 剪辑,在玩家滞空时过渡到 jump loop,然后在落地时解析为 jump end。状态之间的过渡也是 混合(blended) 的,并且每种状态的混合行为都是可配置的,因此你可以在不触碰代码的情况下调整切换是干脆还是平滑的感觉。
结果是一个真正的动画角色,而不是默认的方块状人物——它能对玩家正在做的事情做出适当反应,而不仅仅是摆出姿势。
玩家预设的手部物品附着
自定义玩家预设完全支持渲染玩家手持的物品。你可以指定 左手和右手附着到的骨骼,物品会随着这些骨骼在所有动画中移动。
附着可在多个级别进行配置:
- 所有手持物品的 全局 缩放和旋转偏移
- 按物品类型 的覆盖(例如,所有剑)
- 按物品 的覆盖,当特定物品需要恰好放置时
因此,你可以一次设置合理的默认值,仅调整实际需要的那些情况。
对于 MMD 角色来说,这比听起来更容易。PMX/PMD 文件中的骨骼名称几乎总是日语,这通常会使手部骨骼设置成为猜测游戏。模组 自动检测 标准 MMD 命名约定中的左右手骨骼,因此大多数 MMD 绑定上的手持物品配置开箱即用,无需你深入挖掘骨骼树。
方块替换
方块的工作方式相同。原版和自定义方块都可以通过预设渲染为完全不同的 3D 模型,而底层的游戏逻辑保持不变。
泥土块可以渲染为木桶。熔炉可以变成机械发电机。石头块可以显示为工业机械。装饰性方块变成雕像、家具、道具——取决于预设定义的内容。每个方块预设存储其模型和渲染设置,使得大规模视觉 overhaul 变得容易。
截至目前,方块完全不支持动画。未来可能会支持,但实际上这样做性能成本太高,这就是原因所在。
带有红石状态的 3D 展示方块
为了更直接的控制,有一个专用的 3D 展示方块。将其放入世界中并放入任何预设,你就可以获得贯穿整个 1–15 信号范围的红石驱动动画控制。
不同的信号强度可以触发不同的动画、姿态、机械状态或视觉行为。信号 1 可能表示待机,信号 5 表示启动序列,信号 10 表示工作状态,信号 15 表示完全激活。这一切都在预设文件中定义。
它专为动态构建而设计,而非仅仅是静态装饰。
3D 物品与实体支持
相同的渲染系统同样适用于物品和实体。物品可以使用真正的 3D 模型——武器、工具、神器、自定义装备等均可实现。
物品预设根据替换范围的不同分为两种类型:
- 全局替换(World replacement):在所有情况下、所有位置替换该物品——每当选定的物品出现在世界中时,它都会渲染为自定义模型,没有任何例外。
- 玩家专属替换(Player replacement):具有作用域限制——仅当特定玩家预设处于激活状态时,该物品才会被替换。这在自定义角色需要使用独特装备且不希望其他玩家看到,或者不同预设需要同一基础物品的不同版本时非常有用。
怪物、生物、NPC、矿车、船只以及任何技术性移动实体都可以通过各自的预设进行完全替换,每个预设都拥有独立的动画和行为关联的状态。因此,动画替换并不局限于游戏的某一部分——它们适用于整个游戏的所有实体。
请注意,虽然此处并未详尽描述所有内容(否则篇幅将过于冗长),但由于实际性能下降的限制,仍存在诸多限制。您可以提出功能请求,但这并不能保证该功能一定会实现。
此外,截至目前,由于兼容性维护极为困难,本模组将不支持其他 Minecraft 版本。
Lumina's Custom: 3D Models
Lumina's Custom is a Minecraft rendering mod that loads real external 3D assets into the game — with their rigs, bones, materials, morphs, and animation systems intact. The point is to step outside the cube workflow and use models that come straight from standard 3D pipelines, without sacrificing too much performance in the process.
Everything runs through a preset system. A preset isn't just a model file — it's the full package: the 3D asset itself, its render config, its materials, the scale/position/rotation tweaks, optional physics (mmd only), animation files, and the animation states tied to gameplay logic.
So a preset really defines how a model exists inside Minecraft, not just what it looks like. If animations are part of it, the preset also maps which clip plays in which state. A player preset assigns walk, sprint, jump, idle, swim, attack animations (and much more to come) based on actual player state. A block preset can swap animations depending on redstone level. An entity preset can switch clips based on movement or combat behavior. It keeps things modular and reusable.
Modern 3D format support
The mod handles FBX and GLB natively, including their built-in animation systems. Both formats give solid runtime performance and play nicely with modern tools, so they're the go-to choice when FPS matters as much as visuals.
MMD models are also fully supported through PMX and PMD, with animation playback driven by VMD files. That covers complex skeletal rigs, advanced material setups, morph systems, high bone counts, accessories, toon textures, and authentic VMD playback — basically everything you'd need to drop a full MMD character into a scene without losing fidelity.
There's also partial retargeting support for animations, so a clip authored on one rig can be reused on another without redoing the whole thing from scratch. It's not perfect across every rig combo, but it covers some of the common cases.
MMD physics, with a Bullet backend
MMD models are usually heavier than FBX or GLB because of their bone counts and physics setups, so the mod ships some settings to allow the player to select between custom gl rendering (which doesn't support shaders) or shader-compat rendering (which comes with a higher performance impact but support iris shaders). It also comes with a Bullet Physics-based cloth simulation to handle dresses, long hair, accessories and other soft-body details properly.
For heavier scenes, those simulations can be baked and replayed instead of solved live every frame. You keep the look without paying the runtime cost — which is the only real way to make complex characters viable in larger scenes.
Third-person player replacement
One of the bigger features: the default Minecraft player model can be fully replaced in third-person by a rigged, animated 3D character. Not a skin swap — an actual rigged model driven by an FBX, GLB, or PMX/PMD+VMD preset.
Gameplay states are wired directly to animation playback: walking, sprinting, jumping, falling, attacking, sneaking, swimming, riding, idle (and much more to come), plus the transitions between them. The preset decides which clip belongs to which state.
The animation system goes a bit further than one-clip-per-state, though. A single gameplay state can hold multiple clips chained together — for example, a jumping state can play a jump start clip, transition into a jump loop while the player is airborne, and then resolve into a jump end on landing. Transitions between states are also blended, and the blend behavior is configurable per states, so you can tune how snappy or smooth the switches feel without touching code.
The result is an actual animated character instead of the stock blocky figure — one that reacts properly to what the player is doing, not just snapping between poses.
Hand item attachment on player presets
Custom player presets fully support rendering the items the player is holding. You specify which bone the left hand and right hand attach to, and the items follow those bones through every animation.
The attachment is configurable on multiple levels:
- a global scale and rotation offset for all held items
- per-item-type overrides (for example, all swords)
- per-item overrides when a specific item needs to sit just right
So you can set a sane default once and only tweak the cases that actually need it.
For MMD characters, this gets easier than it sounds. Bone names in PMX/PMD files are almost always in Japanese, which would normally make the hand-bone setup a guessing game. The mod auto-detects the left and right hand bones from the standard MMD naming conventions, so the held-item config works out of the box on most MMD rigs without you having to dig through bone trees.
Block replacement
Blocks work the same way. Vanilla and custom blocks alike can render as completely different 3D models through presets, while the underlying gameplay logic stays untouched.
A dirt block can render as a wooden barrel. A furnace can become a mechanical generator. A stone block can show up as industrial machinery. Decorative blocks turn into statues, furniture, props — whatever the preset defines. Each block preset stores its model and render setup, which makes large visual overhauls easy.
As of now, blocks doesn't support animations at all. It will probably in the future but actually costs too much performance hence why.
3D display block with redstone states
For more direct control, there's a dedicated 3D display block. Drop any preset into the world with it, and you get redstone-driven animation control across the full 1–15 signal range.
Different signal strengths can trigger different animations, poses, mechanical states or visual behaviors. Signal 1 might be idle, signal 5 an opening sequence, signal 10 a working state, signal 15 a full activation. It's all defined inside the preset itself.
It's built for dynamic builds, not just static decoration.
3D items and entity support
The same rendering system carries over to items and entities. Items can use proper 3D models — weapons, tools, artifacts, custom gear, all of it.
Item presets come in two flavors depending on how broadly you want the replacement to apply:
- World replacement swaps the item everywhere, all the time — every time the selected item appears in the world, it renders as your custom model, no exceptions.
- Player replacement is scoped: the item only gets replaced when a specific player preset is active. That's useful when a custom character is meant to use unique gear that shouldn't show up on everyone else, or when different presets need different versions of the same base item.
Mobs, creatures, NPCs, minecarts, boats, and any technical moving entity can be fully replaced through their own presets, each with its own animations and behavior-linked states. So animated replacements aren't limited to one part of the game — they apply across the board.
Bear in mind that while not everything has been described here as it would be very very long, there's still a lot of limitations due to actual performance degradation. You may kindly ask for a feature but it's not a guarantee it will be available.
And as of now, no other minecraft versions will be supported as it's very hard to maintain compatbility.
评论 0
登录后参与评分
还没有评论,来抢沙发吧