描述
Litematica 是一款现代的结构模组,主要面向 MC 1.12.x 上的 LiteLoader、MC 1.13.x 上的 Rift 以及 MC 1.14+ 上的 Fabric 等轻量级加载器。
此外还有一个 Forge 版本,但目前仅支持 MC 1.12.2。对于后续版本的 Minecraft,目前仅有第三方移植版本,例如 Forgematica。
Litematica 拥有旧版 Schematica 模组的所有主要功能(并增加了许多额外功能),除了打印机功能。该功能并未计划集成到 Litematica 本体中,而是留给扩展模组来实现(参见:aria1th printer 或 the other printer)。
与光影的兼容性
在 1.21.3+ 版本中,Litematica 的渲染目前在光影下(即使使用 Iris)无法正常工作。因此当你需要使用 Litematica(结构渲染)时,请禁用光影。
在较旧的 Minecraft 版本中,使用光影时的渲染效果更好,至少在使用 Iris 时是这样,但也取决于具体的光影包。某些光影包会严重破坏渲染效果,而有些曾经能很好地工作。Optifine 通常问题更多,如果你使用 Litematica,基本上完全无法在 Optifine 上使用光影。一般建议是使用 Sodium(配合 Iris)来替代 Optifine。
热键
打开 Litematica 主菜单的默认热键是 M。
注意:如果你使用的是非 QWERTY 键盘布局,按键可能会有所不同,例如在 AZERTY 布局下 M 可能会变成 ,。
其他常用默认热键:
M + C- 直接打开 config(配置)菜单的热键M + R- 切换开/关来自 Litematica 的所有渲染M + G- 仅切换开/关结构渲染(“ghost blocks”/幽灵方块——例如所有 HUD 仍会渲染)M + T- 切换开/关“tool item”(默认为木棍)的功能M + P- 直接打开结构Placements(放置)菜单/列表M + V- 打开结构Verifier(验证器)菜单Numpad minus(小键盘减号) - 打开当前选中放置项的放置配置菜单Numpad multiply(小键盘乘号) - 打开区域编辑器菜单Page Up/Down(上/下一页) - 在渲染层设置中更改选中的图层M + Page Up/Down(上/下一页) - 更改渲染层模式Ctrl + scroll(手持工具时) - 循环切换“工具模式”(主菜单左下角也有一个用于此功能的按钮)Alt + scroll(手持工具时) - 根据玩家注视方向微调/移动选中的放置项或区域选择框或角点(取决于工具模式)Ctrl + M- 切换或循环某些“工具模式”的“子模式”或主要设置,例如 Paste(粘贴)模式下的pasteReplaceBehavior,Area Selection(区域选择)模式下的Corners(角点)与Expand(扩展)行为,或 Delete(删除)模式的Area(区域)与Placement(放置)行为
多人游戏警告
Easy Place 模式功能可能会导致你在某些服务器上被封禁!
Easy Place 功能始终会在目标位置的空气方块上进行点击操作,这很容易被反作弊系统检测到。因此可能导致以下两种情况之一:方块放置被拒绝,你只会得到客户端的幽灵方块;或者某些反作弊系统将其标记为作弊并自动将你封禁。因此,在使用 Easy Place 之前,请先确认服务器是否允许使用该功能!
如果你安装了 Optifine...
一般来说,我不建议使用 Optifine(无论是搭配 Litematica 还是其他用途),因为它会导致各种渲染问题。如果你想要使用光影,我建议使用 Sodium 和/或 Iris。
如果你已安装 Optifine,则你可能需要在 Optifine 中禁用一些选项,否则结构渲染将会损坏:
- 如果出现诡异的三角形故障,则在 1.16+ 版本中首先尝试更新到最新版的 Litematica。如果无效,则将光影设置为
OFF(不是Internal),然后重启游戏。 Render Regions(渲染区块)可能需要禁用,以防止出现奇怪的渲染问题(结构在奇怪的位置部分渲染)- 如果仍然存在奇怪的 HUD/GUI 渲染问题,可能还需要禁用
Fast Render(快速渲染)
文档
有一个 wiki。Wiki 仍在完善中,并且将来可能会有一个新的地址(或者更准确地说,将在新位置建立一个新的 Wiki,包含更全面的覆盖内容)。
其他/较旧的文档和说明,部分常见问题解答
这是一篇解释模组基本操作的 Reddit 帖子:
Litematica - 服务器上的 Easy Place 支持
Reddit 或我的 Discord 服务器上的其他说明
结构格式转换:
Litematica 带有子区域的 Normal 选择模式:
Litematica - 隐藏区域选择:
Litematica - 无法创建新的选择子区域(在 Simple 模式下):
Litematica - Normal/Multi-Region 区域选择教程:
Litematica - 在 FabricCarpet(无 CarpetExtra)服务器上轻松放置:
Litematica - 快速/简易选择教程:
Litematica - 蓝图格式:
Litematica - 带有方块实体数据的保存与粘贴:
Litematica - 材料列表变体:
Litematica - 手动原点问题:
Litematica - 正确放置楼梯:
Litematica - 大型蓝图的性能优化技巧:
Litematica - 处理大型蓝图、性能低下或崩溃时的解决方案:
Litematica - 如何每次仅显示一种方块类型:
Litematica 无法工作/按键无效:
Litematica “仅渲染一个方块”:
Litematica - 查找蓝图目录/游戏目录:
Litematica - 使用子区域:
Litematica - 在服务器上粘贴红石:
Litematica - 在服务器上粘贴物品栏内容,搭配 Litemoretica:
Litematica - 粘贴任务未运行 + 较为全面的 MSPT 和性能分析快速指南:
Litematica - 蓝图放置原理解析:
Litematica - 材料列表:
Litematica - 大型蓝图的性能优化技巧:
Litematica - .minecraft 目录中没有蓝图文件夹:
Litematica “无法工作”(未在“控制”中列出) -> F3, malilib 按键, Mod Menu:
World Edit 粘贴:
MacOS 如何返回上一级目录:
YouTube 教程
以下是一些我遇到的较好的 YouTube 教程视频。
YouTube 教程
Description
Litematica is a modern schematic mod primarily targeting light mod loaders like LiteLoader on MC 1.12.x, Rift on MC 1.13.x and Fabric on MC 1.14+.
There is also a Forge version, but currently only for MC 1.12.2. For later MC versions there are currently only third party ports such as Forgematica.
Litematica has all the main features (plus a bunch more) of the old Schematica mod, except for the printer, which is not planned for Litematica itself, but instead is left to extension mods (see: aria1th printer or the other printer).
Compatibility with shaders
Litematica's rendering doesn't currently work properly with shaders (even with Iris) in 1.21.3+. So when you need to use Litematica (schematic rendering), disable shaders.
In older MC versions the rendering works better with shaders, at least with Iris, but also depending on the shader pack. Some shader packs break the rendering pretty badly, but some used to work pretty nicely. Optifine in general is/was a lot more problematic, pretty much you can't use shaders at all with Optifine if you use Litematica. The general recommendation is to use Sodium (and Iris) instead of Optifine.
Hotkeys
The default hotkey to open the Litematica main menu is M.
Note: If you use a non-QWERTY keyboard layout, then the keys may be different, such as M becoming , on AZERTY.
Other common default hotkeys:
M + C- The direct hotkey to open the config menuM + R- Toggle ON/OFF ALL rendering from LitematicaM + G- Toggle ON/OFF just schematic rendering ("ghost blocks" - all HUDs for example will still render)M + T- Toggle ON/OFF the "tool item" (which is by default a stick) functionalityM + P- Directly open the Schematic Placements menu/listM + V- Open the Schematic Verifier menuNumpad minus- Open the placement configuration menu for the currently selected placementNumpad multiply- Open the Area Editor menuPage Up/Down- Change the selected layer in the render layers settingsM + Page Up/Down- Change the render layers modeCtrl + scroll(holding the tool) - Cycle the "tool mode" (there is also a button for this in the lower left corner of the main menu)Alt + scroll(holding the tool) - Nudge/move the selected placement or area selection box or corner (depending on the tool mode) in the direction the player is looking atCtrl + M- Toggle or cycle the "sub-mode" or main setting of some of the "tool modes", such aspasteReplaceBehaviorin Paste mode, theCornersvs.Expandbehavior in Area Selection mode, or theAreavs.Placementbehavior of the Delete mode
Warning for multiplayer
The Easy Place mode feature may get you banned on some servers!
The Easy Place feature will always be clicking on the target position's air block, and this can easily be detected by anti-cheat systems. So this can result in at least two things: The block placement will just be rejected and you just get client-side ghost blocks, or some anti-cheat system flags that as cheating and auto-bans you from the server. So before using Easy Place, find out of it's allowed on the server!
If you have Optifine...
In general I don't recommend using Optifine (with Litematica, or otherwise) due to the various rendering issues it causes. Instead I would recommend using Sodium and/or Iris if you want shaders.
If you have Optifine installed, then there are some options that you most likely will need to disable in Optifine, or otherwise it will break the schematic rendering:
- If you get glitchy weird triangles, then in 1.16+ first try updating to the latest Litematica version. If that doesn't work, then set shaders to
OFF(notInternal) and restart the game. Render Regionsprobably needs to be disabled to prevent weird rendering issues (the schematic partially rendering in weird places)Fast Rendermight also need to be disabled if there are still some weird HUD/GUI rendering issues
Documentation
There is a wiki. The wiki is still being worked on, and it will probably have a new address at some point (or rather there will be a new wiki in a new location with a lot more coverage).
Other/older documentation and explanations, some FAQ answers
Here is a Reddit post that explains the very basics of the mod:
Litematica - Easy Place support on servers
Misc explanations on Reddit or my Discord server
Schematic format conversions:
Litematica Normal selection mode with sub-regions:
Litematica - hiding an area selection:
Litematica - can't create new selection sub-regions (in Simple mode):
Litematica - Normal/Multi-Region area selection tutorial:
Litematica - Easy Place on a server with FabricCarpet but no CarpetExtra:
Litematica - easy/fast selections tutorial:
Litematica - schematic formats:
Litematica - saving and pasting with block entity data:
Litematica - Material Lists variants:
Litematica - Manual Origin issue:
Litematica - placing stairs correctly:
Litematica - performance tips with large schematics:
Litematica - large schematics, bad performance or crashes, what to do:
Litematica - how to only show one block type at a time:
Litematica not working/keys not working:
Litematica "only render one block":
Litematica - finding the schematics directory/game directory:
Litematica - using sub-regions:
Litematica - pasting redstone on servers:
Litematica - pasting inventory contents on servers, feat. Litemoretica:
Litematica - paste task not running + somewhat comprehensive mspt and profiling quick howto:
Litematica - schematic placement explained:
Litematica - material list:
Litematica - performance tips with large schematics:
Litematica - no schematics directory in the .minecraft directory:
Litematica "not working" (not in Controls) -> F3, malilib keys, Mod Menu:
World Edit pasting:
MacOS how to go up one directory:
Youtube tutorials
Here are some of the better Youtube tutorial videos I've come across.
Youtube tutorials
下载 Litematica
下载 Litematica
下载 Litematica
下载 Litematica
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Litematica
下载 Litematica
下载 Litematica
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Litematica
下载 Litematica
下载 Litematica
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
- 修复:使用多种调色板加载 Schematica 文件和原版模板的问题
- 重新登录后刷新过期物品
- 加入时清除缓存
- 微调 "removeBlockEntity" 功能
- 新增:针对树叶的 'pasteAlwaysUsePersistent' 选项
- 修复 Easy Place 无效点击的几个边缘情况
- 新增:将可堆叠实体添加到材料列表中(主要用于处理坐垫)
- 新增:为材料列表中的实体提供物品框覆盖
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
模组
显示你正在注视的方块的信息。(适用于 Minecraft 1.16+ 的 Hwyla/Waila 分支)
模组
查看物品与配方
模组
在游戏画面角落显示附近世界地形、玩家、生物和实体的地图。可创建路径点,帮助你找到标记过的位置。
模组
使用 JavaScript 编辑配方、添加自定义物品、编写世界事件!
模组
添加区块认领和玩家组队功能,并与 Xaero's Minimap 和 World Map 集成
模组
添加全屏世界地图,显示你在世界中已探索的区域。与 Xaero's Minimap 搭配使用效果极佳。
评论 0
登录后参与评分
还没有评论,来抢沙发吧