MineCoasters — Minecraft 中的真实过山车
在平滑、流畅的轨道上建造由物理引擎驱动的真实过山车。 放置锚点,用扳手调整角度,将它们链接成任意角度的流畅曲线轨道——然后放下一节车厢并乘坐。动量、重力、摩擦力和阻力均经过模拟:你的布局能实现什么完全由物理决定,而非被限制在网格化的铁轨上。
适用于 NeoForge 1.21.1 版本的 Minecraft。支持创造模式或生存模式游玩。兼容单人及多人游戏——物理计算完全由服务器权威控制。
自由形式样条轨道
- 轨道可通向任何地方:任意高度、任意侧倾、任意俯仰——包括环圈、螺旋翻转、外倾弯道以及超过垂直角度的坠落。
- 三种轨距(窄轨 / 中轨 / 宽轨),分别匹配 4 座、8 座和 24 座的列车,以及七种轨道风格——经典钢制骨架、Mack 风格三角桁架、B&M 箱型脊柱、木质(真实的木板甲板 + 人行道)、RMC 风格 IBox、方形桁架,以及经济实惠的野鼠式“简易”风格。任何风格均可与任何轨距搭配。
- 单轨(RMC Raptor 风格)及其专属的骑跨式车厢,以及一个反转开关,可将任何布局翻转至空中,使车厢悬挂于下方。
- 布局辅助工具:一键平滑功能可消除整个布局中的折角;自动侧倾功能会根据你实际乘坐时的速度为每个弯道设置合适的侧倾角度。
- 使用全部16 种染料颜色对所有内容进行上色;使用11 种木材饰面重新贴图木质轨道。
驾驶列车
- 爬升坡配备动画链条,LSM 弹射装置,以及刹车——全部通过红石控制,并可针对每一段调整速度、强度、加速度和摩擦力。
- 轨道传感器(存在检测 / 列车长度 / 速度输出)和一个音效机用于车站氛围和骑行音乐——使用基础红石即可构建车站、区块部分并实现自动发车。
- 多节车厢列车配有连接杆工具;可乘坐任意座位,拥有平滑的四元数骑行摄像机,正确处理翻滚动作。
机械设备
仅需一个方块即可构建整体结构,包括对接站等——随后通过红石进行控制:
- 道岔轨道——一种带有滑动板的转车台式 junction,每条分支都配有角度滑块:支持直线加曲线、对称 Y 形,或两条不同锐度的曲线组合。
- 下降轨道——一种垂直电梯,可在楼层间运送车厢。
- 倾斜轨道——保持列车水平,然后将整个平台倾斜至垂直坠落状态。
- 转盘——旋转整列列车以朝向新线路(或 180° 用于穿梭式过山车)。
- 横向滑移器——一种将列车在平行线路之间横向运输的转车台。
设计你自己的车厢——包括旋转车厢
车厢工作台是一个完整的 3D 体素编辑器:使用八分之一块 RGBA 体素构建车厢(包括玻璃顶棚),在任何位置放置座位,在真实轨道上进行预览,并将设计保存为文件分享。模组中的每节车厢都是体素设计,因此任何东西都可以替换或重新混合。
将设计盖印到过山车车厢物品上,并在同一布局上使用尽可能多的不同车厢——例如红色、橙色和绿色的列车在同一轨道上循环运行,或者一列拥有独特车头车厢的列车。盖印后的车厢保留其自身尺寸,因此混合车厢组成的列车会自动保持正确的间距,且设计会跟随车厢经历碰撞后恢复原状。
添加一个轴承,你的设计就会变成具有真实自由轴承物理效果的旋转车厢——过弯和发射时的离心力会让不平衡的车厢在急弯中甩动,乘客的重量会被计入其中,垂直轴承则像悬挂式吊舱一样摆动。内置了现成的wild_mouse和S&S 4D设计。
水上游乐设施
- 激流勇进、宽体游船和激流河(一种旋转、起伏的 8 人筏)——流动的水槽、湍急的白色泡沫、坠落时的瀑布轰鸣,以及大幅加速带来的巨大水花溅射。
- 水上过山车是一种真正的钢制过山车,仅在你选择的区段淹没——干式坠落进入溅水区水槽后再驶出,采用 Mack 风格。
设计师工具
- 元素放置器——21 种参数化预制元素,一键放置,从带侧倾的转弯和失重坡到挪威环、零 G 翻滚和眼镜蛇翻滚——此外还有输入式、即插即用的爬升坡、车站和弹射装置。逼真的心线翻滚、精确的尺寸,以及实时幽灵预览。
- 蓝图——捕获任何手工建造的区段作为可重复使用的元素,并将其作为文件分享。
- 骑行追踪器——一块统计平板:显示骑行时间、最高速度、失重时间和诚实的G 力(骑手感受到的过载),并自动检测坠落、失重坡、螺旋和翻转。
- 骑行摄像机——红石触发的骑行照片摄像机,将照片投射到照片屏幕上。真实记录你的实际列车和乘客的骑行照片。
支撑结构与装饰物
钢制支撑梁(配有梯子和加固支架)、配有专用锯木机的木质支撑板、可雕刻的木制脚手架(轨道穿过其中),以及钢制平台、楼梯、栅栏、绳索围栏和混凝土底座——所有颜色均有提供。
生存模式
所有物品均可制作,建造过程会消耗你制作的材料。
用铁和煤冶炼过山车钢,将普通木棍绑定为强化木棍,然后逐步制作轨道、支撑结构、装饰物、工具和机器——全部在普通合成台中完成。钢材出厂时为裸金属灰色,可按原版方式染上任意颜色:八个同色方块围绕一个染料。
轨道和支撑结构的成本按长度计算,因此为了形成平滑曲线而均匀分布锚点的成本,绝不会高于稀疏分布的成本。使用 Linker 收回轨道时,组件会退回。元素放置器会在你放置之前告诉你一个环圈的成本。
更喜欢在没有记账负担的情况下建造?创造模式不受影响——那里永远不会消耗任何物品。
说明书
每位玩家初始都会获得图解版 MineCoasters 手册——包含章节、可点击的目录页以及几乎每个部分的插图——全面覆盖上述所有内容。
**多人游戏:**完全支持;物理运算在服务端运行,因此所有人看到的骑行效果一致。**整合包:**允许使用——详见许可证。发现错误或有任何想法?请使用问题追踪器。
MineCoasters — real roller coasters for Minecraft
Build real, physics-driven roller coasters on smooth, free-flowing track. Place
anchor points, aim them with a wrench, link them into flowing curved track at any angle
— then drop a car on and ride. Momentum, gravity, friction and drag are all simulated:
what your layout can do is decided by physics, not by rails snapped to a grid.
For Minecraft 1.21.1 on NeoForge. Plays in creative or survival. Works in singleplayer
and multiplayer — physics is fully server-authoritative.
Free-form spline track
- Track goes anywhere: any height, any bank, any pitch — loops, corkscrews,
overbanks, beyond-vertical drops.
- Three gauges (narrow / medium / wide) with matching 4-, 8- and 24-seat trains, and
seven track styles — classic steel skeleton, Mack-style triangle lattice, B&M box
spine, wooden (real plank decks + walkways), RMC-style IBox, square lattice, and a
cheap-and-cheerful wild-mouse "simple" style. Any style pairs with any gauge.
- Single-Rail (RMC Raptor style) with its own straddle car, and an Inverted
toggle that flips any layout overhead so the cars hang beneath.
- Layout helpers: one-click Smooth fairs the kinks out of a whole layout, and
Auto-bank banks every turn for the speed you actually rode it at.
- Paint everything in all 16 dye colours; re-skin wooden track with 11 wood
veneers.
Drive the train
- Lift hills with animated chains, LSM launches, and brakes — all
redstone-controlled, with per-section speed, strength, acceleration and friction
tuning.
- Track sensors (presence / train length / speed output) and a sound machine
for station ambience and ride music — build stations, block sections and auto-dispatch
with plain redstone.
- Multi-car trains with a coupler tool; ride any seat, with a smooth quaternion
ride camera that handles inversions properly.
Machines
One block builds the whole thing, docks and all — then redstone runs it:
- Switch Track — a transfer-table junction with a sliding plate, and an angle slider
for each leg: straight-and-curve, a symmetric Y, or two curves of different sharpness.
- Drop Track — a vertical elevator that carries the car between levels.
- Tilt Track — holds a train flat, then tips the whole platform into a vertical drop.
- Turntable — spins a whole train to face a new line (or 180° for shuttle coasters).
- Lateral Slide — a transfer table that carries trains sideways between parallel lines.
Design your own cars — including spinners
The Cart Workstation is a full 3D voxel editor: build cars from eighth-block RGBA
voxels (glass canopies included), place seats anywhere, preview against real track, and
share designs as files. Every car in the mod is a voxel design, so anything can be
replaced or remixed.
Stamp a design onto Coaster Car items and run as many different cars on one layout as
you like — a red train, an orange one and a green one circulating the same track, or a
train with a distinct nose car. Stamped cars keep their own size, so a train of mixed cars
spaces itself correctly, and the design follows the car through a crash and back.
Add a Bearing and your design becomes a spinning car with real free-bearing
physics — cornering and launch forces whip a lopsided tub through tight bends, riders
count as weight, and vertical bearings swing like suspended gondolas. Ready-made
wild_mouse and S&S 4D designs are included.
Water rides
- Log Flume, wide Boat Ride, and River Rapids (a spinning, bobbing 8-seat
raft) — flowing troughs, rushing whitewater foam, waterfall roars on drops, and big
speed-scaled splashes.
- The Water Coaster is a real steel coaster that floods only the sections you
choose — dry drops into splash-down troughs and out again, Mack style.
Designer tools
- Element Placer — 21 parametric prefab elements placed in one click, from banked
turns and airtime hills to Norwegian loops, zero-G rolls and cobra rolls — plus typed,
ready-to-run lift hills, stations and launches. Realistic heartlined rolls, exact
dimensions, and a live ghost preview.
- Blueprints — capture any hand-built section as a reusable element and share it as
a file.
- Ride Tracker — a stats tablet: ride time, top speed, airtime, and honest
rider-felt G-forces, plus automatic detection of drops, airtime hills, helices and
inversions.
- Ride Cameras — redstone-triggered on-ride photo cameras feeding photo screens.
Real on-ride photos of your actual trains and riders.
Supports & scenery
Steel support beams (with ladders and bracing), wooden support planks with a dedicated
Plank Saw, carveable wooden scaffolds that track passes through, plus steel platforms,
stairs, fences, rope fences and concrete footers — in every colour.
Survival
Every item is craftable, and building consumes what you've made.
Smelt Coaster Steel from iron and coal, bind Fortified Sticks from ordinary
sticks, and work up to track, supports, scenery, tools and machines — all in a normal
crafting table. Steel comes out bare-metal gray and takes any dye the vanilla way: eight
of a colour around one dye.
Track and supports cost by length, so spacing your anchors for a smooth curve never
costs more than spacing them sparsely. Pull track up with the Linker and the pieces come
back. The Element Placer tells you the price of a loop before you place it.
Prefer to build without the bookkeeping? Creative mode is untouched — nothing is ever
consumed there.
The Manual
Every player starts with the illustrated MineCoasters Manual — chapters, a clickable
contents page and an illustration on nearly every section — covering all of the above
in-game.
Multiplayer: fully supported; physics runs on the server, so everyone sees the same
ride. Modpacks: permitted — see the licence. Found a bug or have an idea? Use the
issue tracker.
评论 0
登录后参与评分
还没有评论,来抢沙发吧