描述
Multishot 是一个主要用于制作延时摄影或自动截图的模组,它可以在预设的时间间隔内自动截取屏幕画面。
它还具备一些其他功能,在制作延时摄影或其他视频时可能非常有用,例如几种不同的运动模式(线性、圆形、路径)以及基本的缩放功能。
从版本 3.2.0 开始,Multishot 还增加了一种自由移动摄像机模式,这意味着即使是在单人游戏中,你也可以轻松地对自己建造的过程进行延时拍摄。
此版本的 Multishot (v3.x.x) 是专门为 Forge/FML 从头重写的。这意味着它现在应该与大多数为 Forge 编写的其他模组兼容。换句话说,你现在终于可以在 FTB 或其他整合包中开始制作那些延时摄影了!(前提是已安装 Forge)
快速教程
要开始制作延时摄影,你首先应该按照想要的方式配置 Multishot。
最重要的设置包括:间隔时间(即两次截图之间的时间)、截图保存的目标目录、图像格式/压缩率,以及是否希望使用自动运动选项。
推荐的初始值约为 1.0 秒的间隔时间。如果你有足够的磁盘空间,请保持图像格式为 PNG。
(PNG 是一种无损格式,因此在可用选项中能提供最佳画质。JPG 格式通过不同的压缩值可以节省一些磁盘空间,并且保存/压缩速度稍快,但通常画质较差,尤其是在低质量选项下。)
我不建议将间隔时间设置在 0.5 秒以下,特别是当你使用 PNG 格式时,因为除非你的电脑速度很快,否则它可能无法在下一次截图到来之前保存好上一张截图。此外,这会导致产生大量截图并占用大量磁盘空间。
还要确保将 Multishot Enabled(启用 Multishot)设置为 ON,并将 Motion Enabled(启用运动)设置为 ON,以便使用热键。这些设置仅启用热键,并不意味着 Multishot 或运动模式会一直开启。另外,最好将 Lock Controls(锁定控制)设置为 ON,这样你在录制过程中就不会意外改变摄像机的角度或位置。
完成上述设置后,你可以使用 Multishot Start/Stop(开始/停止录制)热键(默认:M)开始进行多帧截图;或者如果你想使用运动功能,只需启动运动(默认按键:N),如果已设置间隔时间,多帧截图模式也将同时启动。
你可以通过 Multishot Hide GUI 热键(默认:H)单独隐藏 Multishot 的 GUI/HUD,或者通过按 F1 隐藏 Minecraft 的 HUD 来隐藏它们。
Multishot 还包括几个稍微不同的简单选项,用于在满足某些条件后自动停止录制和/或运动。
这四个选项分别是:OFF(关闭)、Video(视频)、Real(实时)和 Shots(截图数)。
OFF:不自动停止,手动停止录制和/或运动。
Video:在拍摄了足够数量的截图以达到所需的最终延时视频时长后停止(注意: 假设视频帧率为 24 fps,即每秒 24 张截图。如果你使用例如 30 fps,则需要自行计算所需的截图数量,并使用例如 Shots 选项代替。)
Real:在设定的“真实时间”过去后停止,即你实际录制的时间长度,无论在此期间拍摄了多少张截图。
Shots:在拍摄了请求数量的截图后停止。
请注意,Video 和 Real 时间选项拥有各自独立的时间设置!
单人游戏录制提示:
如果你在同一个计算机上使用两个 Minecraft 实例(这在单人世界中使用独立摄像机和主玩家录制延时摄影时很常见),请务必按下 F3 + P 开启“失去焦点时游戏不暂停”的功能。当该功能开启时,你应该能够 Alt + Tab 切换出去而不会使游戏进入暂停/主菜单界面。
从 Multishot 版本 3.2.0 开始,不再需要同时运行两个客户端。请参阅自由摄像机模式。
自由摄像机模式
从版本 3.2.0 开始,Multishot 拥有了自由移动摄像机模式,因此你可以轻松地从另一个视角记录自己。请注意,这受限于当前客户端加载的内容,因此你无法在未加载的区域进行录制。
其工作原理如下:在路径模式中,摄像机会按照预期沿着路径移动。在线性和圆形模式中,摄像机将从你启动运动时玩家所在的位置开始移动。
你可以在 Multishot 菜单的 Camera(摄像机)标签页中启用/禁用自由摄像机模式并设置录制分辨率。
以下是一些合理的初级设置示例
一些路径示例
Multishot 热键
以下是所有 Multishot 热键及其默认值。
它们可以通过常规的 Minecraft 选项 => 控制菜单进行修改。
- Multishot 选项菜单(默认:
K)
- 开始/停止录制(默认:
M)
- 开始/停止运动(默认:
N)
- 暂停/恢复录制,保留图像计数器和保存目录(默认:
P)
- 锁定/解锁控制(默认:
L)
- 隐藏/显示 Multishot GUI(图标、消息和路径标记)(默认:
H)
用于控制运动设置的附加热键组合
圆形和椭圆模式:
HOME + Pause key(暂停默认:P):设置运动围绕的中心点
END + Pause key(暂停默认:P):设置目标点,摄像机在移动过程中始终指向该点
HOME + DEL + Pause key(暂停默认:P):移除中心点
END + DEL + Pause key(暂停默认:P):移除目标点
路径模式:
Ctrl + 运动键 (默认: N): 移动到路径起点
Shift + 运动键 (默认: N): 移动到最近 (=高亮) 的点
HOME + END + 暂停键 (暂停默认: P): 反转当前选定路径的旅行方向
END + 暂停键 (暂停默认: P): 设置目标点,移动时摄像机将始终指向该点
END + DEL + 暂停键 (暂停默认: P): 移除目标点
暂停键 (暂停默认: P): 在玩家当前位置添加一个新的路径点,包括摄像机角度
INSERT + 暂停键 (暂停默认: P): 在高亮点之后插入一个新的路径点
INSERT + HOME + 暂停键 (暂停默认: P): 在高亮点之前插入一个新的路径点
Ctrl + 多重射击菜单键 (默认: K): “剪切” (=存储) 最近的路径点(更准确地说,是它的索引/ID)
Ctrl + 暂停键 (暂停默认: P): 移动(或更准确地说,重新创建)之前存储的路径点到玩家的当前位置
DEL + 暂停键 (暂停默认: P): 移除最近 (=高亮) 的路径点
Ctrl + DEL + 暂停键 (暂停默认: P): 从当前路径中移除所有路径点
UP + 暂停键 (暂停默认: P): 切换到下一个路径 (+1)
DOWN + 暂停键 (暂停默认: P): 切换到上一个路径 (-1)
UP + DOWN + 暂停键 (暂停默认: P): 从文件重新加载当前路径
多重射击选项菜单按键和提示
要通过选项菜单更改多重射击选项,以下是有用的按钮和修饰键。数值变化量相对于最小变化单位:
-
鼠标左键 或 向上滚动: +1
-
鼠标右键 或 向下滚动: -1
-
Ctrl + 鼠标左键 (或向上滚动): +10
-
Ctrl + 鼠标右键 (或向下滚动): -10
-
Shift + 鼠标左键 (或向上滚动): +100
-
Shift + 鼠标右键 (或向下滚动): -100
-
Ctrl + Shift + 鼠标左键 (或向上滚动): +1000
-
Ctrl + Shift + 鼠标右键 (或向下滚动): -1000
-
鼠标中键: 将值重置为默认值
-
Ctrl + 鼠标中键: 反转值的符号 (+/-)
-
设置目标目录目前按以下方式操作:
- 将目标目录的完整路径复制到剪贴板
- 右键点击“粘贴路径”按钮
- 路径将以小字体显示在“返回游戏”按钮上方
- (中键点击“粘贴路径”按钮会将路径重置为默认值)
- 在 Windows 7 中将路径复制到剪贴板:
- 在资源管理器中导航到目标目录
- 通过在顶部位置栏中右键单击目录并选择“复制地址(作为文本)”来复制完整路径到剪贴板
- 或者,只需在任何文本编辑器中输入路径,选中它并复制即可
关于运动模式
首先从 Multishot Motion 菜单中选择要使用的运动模式。
菜单中的 Speed 设置在 Circle、Ellipse 和 Path 模式中是共享的。
Linear 模式使用独立的轴设置。
Linear 模式 - 沿 x、z 和 y 轴的简单恒定线性变化,以及根据设置的恒定左右旋转(偏航)和上下旋转(俯仰)。
Circle 模式 - 用于围绕中心点移动,例如在延时拍摄建筑物建造过程时。
- 通过将玩家移动到该位置并按下
HOME + 多重射击暂停键 (默认: P) 来设置中心点。你将看到一个蓝色标记。
- 通过将玩家移动到你想让摄像机在移动时注视的位置,并按下
END + 多重射击暂停键 来设置该点。你将看到一个红色标记。
- 你也可以在没有设置目标点的情况下使用圆形模式,此时移动过程中摄像机旋转不会改变。
- 移动速度由 Motion 菜单中的
Speed 设置决定。
- 半径由开始运动时玩家到中心点的距离定义。换句话说,你在开始运动时位于圆上。
Ellipse 模式 - 待完成
Path 模式
- 注意:
Path (smooth) 模式的运动计算和移动功能待完成/开发中。
- 'Path (linear)' 模式在两点之间沿直线移动。'Path (smooth)' 模式旨在沿着定义的点计算平滑曲线。
- 你可以通过将玩家移动到所需位置(包括摄像机角度),然后按下
多重射击暂停键 (默认: P) 来添加路径点。
- 添加点后,你会看到一个标记和一条指示摄像机注视角度的线。
- 你最接近的点/标记会渲染为黄色以突出显示。这在删除、移动或插入点/标记时很有用。
- 你可以使用
INSERT + 多重射击暂停键 (默认: P) 或 INSERT + HOME + 多重射击暂停键 (默认: P) 在路径中间插入新点。
- 你可以使用
HOME + END + 多重射击暂停键 (默认: P) 反转选定路径的旅行方向。
- 你可以选择通过移动到该位置并按下
END + 多重射击暂停键 (默认: P) 添加一个“全局”目标点。
- 如果已定义目标点,所有摄像机角度指示线都将指向该目标点。
- 你可以通过按下
END + DEL + 多重射击暂停键 来移除目标点。
- 如果没有定义全局目标点,摄像机将在点与点之间的路径上,从每一点的视角平滑过渡到下一点的视角。
- 当你在路径模式下启动运动时,你首先会被移动到路径起点,然后运动(如果间隔不是 OFF,则包括录制)才会开始。
Description
Multishot is a mod primarily meant for making timelapses or otherwise taking screenshots automatically, with a pre-set interval between the screenshots.
It also has some other features that might be useful when making timelapses or other videos, such as a few different motion modes (linear, circle, path) and a basic zoom functionality.
Starting from version 3.2.0, Multishot now also has a free moving camera mode, which means that you can easily timelapse yourself building stuff even in single player.
This version of Multishot (v3.x.x) is completely rewritten from scratch for Forge/FML. This means that it should now be compatible with most other mods that are written for Forge. In other words, now you can finally start making those timelapses in FTB or other modpacks! (provided that Forge is installed)
Quick Howto
To start making timelapses, you should first configure Multishot the way you want to make your timelapse.
The most important settings are the Interval, which is the time between screenshots, the target directory where the screenshots will be saved, the image format/compression, and whether you want to use the automatic motion options.
Good starting values are about 1.0 seconds for the interval, and if you have plenty of disk space available, leave the image format as PNG.
(PNG is a lossless format, so it offers the best quality of the available options. The JPG format with the different compression values can save you some disk space and are a fair bit faster to save/compress, but they usually look a lot worse, especially with lower quality options.)
I wouldn't go below 0.5 seconds for the interval, especially if you are using PNG as the format, because unless you have a fast computer, it might not be able to save the previous screenshot before the next one is due. Also, you'll just end up with a huge amount of screenshots and a lot of disk space used.
Also make sure to set Multishot Enabled to ON, and also Motion Enabled to ON to be able to use the hotkeys. Those just enable the hotkeys, they do not mean that the multishot or motion modes are always on. It is also probably a good idea to turn Lock Controls to ON, so that you don't accidentally change the camera angle or position while recording.
When all that is done, you can start taking multishots using the Multishot Start/Stop hotkey (default: M), or if you also want to use the motion feature, just start the motion (default key: N), and the multishot mode mode will also start, if the Interval has been set.
You can hide the Multishot GUI/HUD either on its own with the Multishot Hide GUI hotkey (default: H), or by hiding the Minecraft HUD with F1.
Multishot also includes a few slightly different, simple options to automatically stop the recording and/or motion after some criteria is met.
The four options are: OFF, Video, Real and Shots.
OFF: Don't stop automatically, stop the recording and/or motion manually.
Video: Stops after the required number of screenshots have been taken for the requested length of final timelapse video time (NOTE: assumes 24 fps/24 screenshots per second of video. If you use for example 30 fps, you need to calculate the required number of screenshots yourself and use for example the Shots option instead.)
Real: Stops after the set amount of "real time" has passed, so the time you have been recording, regardless of how many screenshots have been taken in that time.
Shots: Stops after the requested number of screenshots have been taken.
Note that the Video and Real time options have their own separate time settings!
Tip for single player recording:
If you use two instances of Minecraft on the same computer (often the case for recording timelapses in singleplayer worlds with a separate camera and the main player), be sure to toggle ON the feature where the game does not pause when losing focus, by pressing F3 + P. When it is ON, you should be able to Alt + Tab out without the game going into the pause/main menu screen.
Starting from Multishot version 3.2.0, there is no need to use two clients anymore. See the free camera mode.
Free camera mode
Starting from version 3.2.0, Multishot now has a free moving camera mode, so you can easily record yourself from another viewpoint. Note that this is limited to what your client has currently loaded, so you can't record in unloaded chunks.
The way this works, is that in the path mode the camera moves along the path as you would expect. In the Linear and Circle modes the camera starts from where your player is when you start the motion.
You can enable/disable the free camera mode and set the recording resolution in the Multishot menu, on the Camera tab.
Here is an example of reasonable basic settings
Some examples of paths
Multishot hotkeys
Here are all the multishot hotkeys and their default values.
They can be changed via the regular Minecraft Options => Controls menu.
- Multishot options menu (default:
K)
- Start/stop recording (default:
M)
- Start/stop motion (default:
N)
- Pause/unpause the recording, preserving the image counter and save directory (default:
P)
- Lock/unlock controls (default:
L)
- Hide/show the Multishot GUI (icons and messages and path markers) (default:
H)
Additional hotkey combinations for controlling the motion settings
Circle and ellipse modes:
HOME + Pause key (pause default: P): Set the center point, around which the motion happens
END + Pause key (pause default: P): Set the target point, where the camera is pointed at the whole time when moving
HOME + DEL + Pause key (pause default: P): Remove the center point
END + DEL + Pause key (pause default: P): Remove the target point
Path modes:
Ctrl + Motion key (motion default: N): Move to the path start point
Shift + Motion key (motion default: N): Move to the closest (= hilighted) point
HOME + END + Pause key (pause default: P): Reverse the travelling direction of the currently selected path
END + Pause key (pause default: P): Set the target point, where the camera is pointed at the whole time when moving
END + DEL + Pause key (pause default: P): Remove the target point
Pause key (pause default: P): Add a new path point to the player's current location, including the camera angle
INSERT + Pause key (pause default: P): Insert a new path point AFTER the hilighted point
INSERT + HOME + Pause key (pause default: P): Insert a new path point BEFORE the hilighted point
Ctrl + Multishot Menu Key (default: K): "Cut" (= store) the nearest path point (or more precisely, the index/id of it)
Ctrl + Pause key (pause default: P): Move (or more precisely, re-create) the previously stored path point to the player's current location
DEL + Pause key (pause default: P): Remove the closest (= hilighted) path point
Ctrl + DEL + Pause key (pause default: P): Remove all path points from the current path
UP + Pause key (pause default: P): Change to the next path (+1)
DOWN + Pause key (pause default: P): Change to the previous path (-1)
UP + DOWN + Pause key (pause default: P): Reload the current path from file
Multishot options menu keys and tips
To change the multishot options through the options menu, here are the useful buttons and modifiers. The amounts are relative to the smallest unit of change:
-
Mouse Left or scroll up: +1
-
Mouse Right or scroll down: -1
-
Ctrl + Mouse Left (or scroll up): +10
-
Ctrl + Mouse Right (or scroll down): -10
-
Shift + Mouse Left (or scroll up): +100
-
Shift + Mouse Right (or scroll down): -100
-
Ctrl + Shift + Mouse Left (or scroll up): +1000
-
Ctrl + Shift + Mouse Right (or scroll down): -1000
-
Mouse Middle: Reset the value to default
-
Ctrl + Mouse Middle: invert the value (+/-)
-
Setting the target directory is currently done as follows:
- Copy the full path to the target directory to your clipboard
- Right click on the "Paste Path" button
- The path should then be displayed above the Back To Game button in a small font
- (Middle clicking the "Paste path" button resets the path to the default value)
- Copying the path to clipboard in Windows 7:
- Go to the target directory in Explorer
- Copy the full path to clipboard by right clicking the directory in the top location bar and selecting "Copy address (as text)"
- Alternatively just write the path on any text editor, select it and copy it
About the motion modes
First select the motion mode you want to use from the Multishot Motion menu.
The Speed setting in the menu is shared between the Circle, Ellipse and Path modes.
Linear mode uses the separate per-axis settings.
Linear mode - Simple constant, linear change along the x-, z- and y-axes and constant rotation left/right (yaw) and up/down (pitch), according to the settings.
Circle mode - For travelling around a center point, for example when timelapsing the construction of a building.
- Set the center point by moving the player to that spot, and press
HOME + Multishot pause key (default: P). You will get a blue marker.
- Set the point you want the camera looking at when moving, again by moving the player to that spot and pressing
END + Multishot Pause key. You will get a red marker.
- You can also use the circle mode without the target point set, then the camera rotation is not changed while moving.
- The movement speed is the
Speed setting in the Motion menu.
- The radius is defined by the distance from the player to the center point when you start the motion. In other words, you are on the circle when you start the motion.
Ellipse mode - TODO
Path modes
- Note:
Path (smooth) mode motion calculation and movement is TODO/WIP.
- 'Path (linear)' mode moves in a straight line between two points. 'Path (smooth)' mode is meant to calculate a smooth curve along the defined points.
- You can add path points by moving the player to the spot you want, including the camera angle, and pressing the
Multishot Pause key (default: P).
- After adding a point you will get a marker and a line indicating the camera looking angle.
- The point/marker that you are closest to is highlighted by rendering it as yellow. Useful when deleting, moving or inserting points/markers.
- You can insert new points in the middle of a path with
INSERT + Multishot Pause key (default: P) or INSERT + HOME + Multishot Pause key (default: P).
- You can reverse the path traveling direction of the selected path with
HOME + END + Multishot Pause key (default: P).
- You can optionally add a "global" target point by moving the player to that spot and pressing
END + Multishot Pause key (default: P).
- If a target point has been defined, all the camera angle indicator lines will go to that target point.
- You can remove the target point by pressing
END + DEL + Multishot Pause key.
- If no global target point is defined, the camera will turn smoothly from the per-point angle to the next point's angle on the way between the points.
- When you start the motion in path mode, you will first be moved to the path start point, and then the motion (and recording, if interval is not OFF) will start.
评论 0
登录后参与评分
还没有评论,来抢沙发吧