Pipster
适用于物品、流体、气体和能量的可读管道,端口自带过滤器,基于信道的传送方块以及能量脉冲放大器。 支持 Fabric 和 NeoForge。
1.4.1 新增内容: 更便捷的扳手操作,插入和抽取使用独立过滤器,可选择目标方块的接触面(酿造台:仅从顶部投入原料),粘贴配置文件时会自动将背包中的卡片安装到端口中。新增对 JEI 和 REI(可将物品或流体拖入过滤器字段)、WTHIT 和 Flan 的可选支持。1.3.0 的世界无需转换即可加载。1.4.1 专为 Minecraft 1.21.1、1.21.11、26.1.2、26.2 和 26.3(26.3 需要 Fabric API 0.165.2 或 NeoForge 26.3.0.100)设计;其他版本请继续使用 Pipster 1.2.0。

- 管道看起来像真正的管道。 每个管道和线缆都是真实的窄形状(非完整方块),在与机器连接处有带螺栓的法兰盘。管体显示类型,节点和法兰盘的颜色显示等级。
- 四种类型,五个等级。 物品管道、流体管道、气体管道和能量线缆,分别从铜(T1)到量子(T5),能量线缆最高可达奇点(T6)。使用螺栓就地升级已放置的管道;它们会保留其设置和内容。
- 过滤器位于端口内。 不再有过滤器方块挡路。直接将过滤器卡片插入管道与机器连接的端口中。
- 传送方块。 通过命名信道传输资源:单维度任意距离(共振)或跨所有维度(量子)。
- 过载。 能量脉冲放大器储存能量并以短暂而强大的脉冲释放。
- 专为服务器构建。 所有内容在受限步长下于服务器端运行。管道不执行刻更新,且 Pipster 永远不会加载区块。

如何识别它们(1.3.0 版的新外观): 物品管道是方形铜管,流体管道是圆形铁灰色管,气体管道是圆形汽油色(深青色)管,能量线缆是带有细绝缘环的更窄方形无烟煤色线缆。中间的节点和法兰盘显示等级颜色(如下括号内所示)。仅在管道与机器连接处的法兰盘有四个螺栓;两个管道之间则是 slim coupling(紧凑型耦合器)。吞吐量、等级、配方和行为均未改变。
- 铜(铜色): 2 物品/刻,100 mB/刻,1,000 E/刻
- 强化(金色): 8 物品/刻,400 mB/刻,8,000 E/刻
- 精密(翡翠绿): 32 物品/刻,1,600 mB/刻,64,000 E/刻
- 共振(青金石蓝): 128 物品/刻,6,400 mB/刻,512,000 E/刻
- 量子(紫水晶紫): 512 物品/刻,25,600 mB/刻,4,096,000 E/刻
- 奇点(红石红,仅限能量线缆): 32,768,000 E/刻
- Supercalifragilisticexpialidocious 能量线缆(品红色配白色螺栓,仅限创造模式): 1,000,000,000,000 E/刻;无配方,不掉落任何物品
气体管道的每刻传输量等同于流体管道的 mB 传输量。吞吐量按管道段共享,因此瓶颈确实是瓶颈。没有任何东西可以无视限制:即使是创造模式线缆也有有限的速率,而两条此类线缆之间的较细线缆仍保持其自身的限制。

1.4.1 及之后的控制方式(默认):
- 右键点击端口: 切换下一个模式(插入、抽取、双向、关闭)。
- 潜行 + 右键点击端口: 打开端口界面。
- 左击手臂: 断开连接;再次左击同一侧的中心可重新连接。扳手不会因左击而破坏管道。
- 潜行 + 左击端口: 粘贴活动副本配置。
- 潜行 + 右键点击中心: 拆卸管道。潜行 + 右键点击空气: 切换到下一个副本配置。
经典控制方式(Pipster 1.3.0 及更早版本,或在 config/pipster-server.properties 中设置 wrenchClassicControls=true 的 1.4.1):
-
右键点击端口: 打开端口界面;在那里设置模式。
-
潜行 + 右键点击手臂: 断开连接;潜行 + 右键点击同一侧的中心可重新连接。
-
潜行 + 右键点击中心: 拆卸管道。潜行 + 右键点击空气: 切换到下一个副本配置。
-
在端口界面中使用“粘贴”按钮进行粘贴。左击:在 1.4.1 的经典控制模式下无效;在 1.3.0 及更早版本中,它会像破坏其他物品一样破坏管道。
-
端口界面: 红石控制、优先级、分配方式(轮询、最近、粘性)、目标方块的接触面,以及一条说明为何没有物品移动的状态行。
-
接受端口: 紧邻某个推动方块但自身无存储空间的侧面(如 AE2 出口总线、Create 漏斗、Oritech 物品和流体管道)可设置为“接受”。它只接收方块推送的内容,绝不主动拉取。
-
复制和粘贴 端口设置,支持 3 个配置文件。自 1.4.1 起,粘贴还会将匹配的过滤器和规则卡片从你的背包移动到端口中;卡片本身不会被创建。
-
合成器(自 1.4.1 起):管道均匀填充合成器,每个槽位一个物品,并从其前方取出它推送的结果;它们永远不会清空合成器的网格。

- 基础型(9 条规则):精确匹配物品、流体或气体;白名单或黑名单
- 高级型(27 条规则):标签、整个模组、精确组件(如附魔)
- 精密型(54 条规则):“源端保留 64”,“目标端填充至 256”
- 规则卡片: 每端口速率限制和能量储备
图案是虚影物品:不会消耗任何东西。
流体和气体管道具有带有建议的过滤字段。输入名称并从列表中选择流体、气体或(使用 Mekanism)化学物质,无需填充容器。# 列出标签,“<mod> 的所有内容”涵盖整个模组,同名条目会在括号中显示其所属模组。

- 共振方尖碑: 任意距离,同一维度,T4 速度
- 量子方尖碑: 服务器的所有维度,T5 速度
- 每个方尖碑每种资源类型一个频道,私有、仅限邀请或公开,每侧独立过滤

能量脉冲放大器 均匀接收能量,以 90% 的效率存储,并在短时间内以高于输入的速率释放能量。它不会创造能量。
- 正面 = 输出,其他所有面 = 输入。脉冲受正面线缆的限制,因此细线缆会限制其输出;在 Singularity 和创造线缆上,则应用放大器自身的脉冲限制。
- 电容组 围绕放大器放置可增加容量和脉冲功率(最多 8 个电容组)。
- 模式: 自动、充电、脉冲(由红石信号或“发射”按钮触发)。
- 屏幕显示: 已存储能量、每秒输入和输出、效率、电容组数量、脉冲限制、当前模式、状态(充电中、就绪、脉冲中、空)。
- 外观与音效: 一个随电荷加速旋转并在使用脉冲时发光的线圈,配有充电指示灯、火花声和专属音效。
- 默认设置(服务器配置): 1,000,000 E 存储,每个电容组增加 +1,000,000 E,16,000 E/t 输入,脉冲 32,000 E/t + 每个电容组增加 4,000 E/t。
- 破坏它会保留物品中的能量;创造模式的拾取功能永远不会复制它。


- Pipster:用于物品、流体、气体和能量的可读管道。
- QNet:集工业、电力、存储、物流和跨维度抽取于一体的模组。
Pipster 本身不需要依赖上述任何模组。

Pipster 通过各加载器的标准接口与其他模组连接:
- Fabric: Transfer API 用于物品和流体,Team Reborn Energy 用于能量(已包含)。提取端口主动拉取能量(可在配置中关闭)。
- NeoForge: 物品、流体和能量能力(Capabilities)
- 气体: Pipster 自有的小型气体 API,标记为
#pipster:gaseous 的流体,以及 Mekanism 化学物质(NeoForge 1.21.1)
Ad Astra、Modern Industrialization 和 Tech Reborn 的气态流体可通过气体管道传输(自 1.4.1 版本起作为气体标签中的可选条目)。
测试兼容性
已在专用服务器和客户端上使用真实的模组 JAR 包进行测试,包括自动化游戏测试,确保物品、流体和能量通过支持的方块进行无损、无重复的传输。可用性因 Minecraft 版本和加载器而异。
- Storage Drawers: 抽屉和压缩抽屉。
- Sophisticated Storage: NeoForge 支持全部五个版本;Fabric 1.21.1(非官方移植版)。
- Energized Power: 电池盒和流体罐。
- Oritech: 能量存储和罐体。
- Powah!: 能量细胞,包括 NeoForge 26.2 和 26.3。
- Mekanism: 能量立方体、流体罐,以及通过气体管道处理的化学物质(NeoForge 1.21.1)。
- Create: 流体罐;机械臂可以 targeting 物品管道(NeoForge 1.21.1)。
- Tech Reborn: Fabric 1.21.1、26.1.2、26.2 和 26.3。
- Carry On: 全部五个 Minecraft 版本。
- Tom's Simple Storage: 全部五个 Minecraft 版本。
- Applied Energistics 2(含 Applied Mekanistics)和 Immersive Machinery: 可与 Pipster 同时启动和运行。
并非这些模组中的所有方块都提供支持。请报告兼容性问题。
内置可选集成
当安装相应模组时,这些集成会自动激活。使用 Pipster 不需要安装以下任何模组。
- Jade: 显示端口模式和状态、可访问的方尖碑频道,以及脉冲放大器的电荷和状态。
- WTHIT: 关于 Pipster 方块及其状态的附加信息。
- JEI 和 REI: 配方查看器集成。
- Flan: 领地保护集成。
- CC: Tweaked: 计算机可以读取管道、方尖碑和脉冲放大器。端口可以使用“Computer”红石模式进行控制。
- Open Parties and Claims (OPAC) 和 FTB Chunks: 管道尊重领地划分,未经批准无法从受保护的库存中提取物品。
- FTB Teams 和 OPAC parties: 队友可以共享频道、方尖碑和管道,包括之前已经放置的设施。
- LuckPerms 和其他权限模组: 支持
pipster.admin 和 pipster.command 权限节点。操作员在没有额外权限模组的情况下也保留这些权限。
- 扳手兼容性: Conduit Wrench 被兼容模组识别为扳手。
集成可用性取决于 Minecraft 版本和加载器。FTB Chunks 和 FTB Teams 支持 Minecraft 1.21.1、1.21.11 和 26.1.2。
有关确切版本和测试细节,请参阅 Supported-Versions。

Minecraft 1.21.1、1.21.11、26.1.2、26.2 和 26.3,Fabric 和 NeoForge。 每个 Minecraft 版本和加载器对应一个文件。发布前,每个文件都会在其对应版本上进行测试:客户端和服务端启动、用于传输的自动化游戏测试、吞吐量限制、过滤器、方尖碑、脉冲放大器、领地和团队、保存和加载,以及与上述合作模组的联合运行测试。
10 个 1.4.1 版本文件的发布检查:已于 2026-11-16 通过。每个文件均在对应的 Minecraft 版本(专用服务器、客户端、所有游戏测试)及该版本的配套模组下进行了验证。318 次运行全部通过,无一失败;另有 10 次运行未能执行,因为 Open Parties and Claims 无法在游戏测试服务器上启动(改为在专用服务器上进行检查)。
- 1.21.1: pipster-1.4.1+mc1.21.1-fabric.jar, pipster-1.4.1+mc1.21.1-neoforge.jar
- 1.21.11: pipster-1.4.1+mc1.21.11-fabric.jar, pipster-1.4.1+mc1.21.11-neoforge.jar
- 26.1.2: pipster-1.4.1+mc26.1.2-fabric.jar, pipster-1.4.1+mc26.1.2-neoforge.jar
- 26.2: pipster-1.4.1+mc26.2-fabric.jar, pipster-1.4.1+mc26.2-neoforge.jar
- 26.3: pipster-1.4.1+mc26.3-fabric.jar, pipster-1.4.1+mc26.3-neoforge.jar
- NeoForge 26.1.2、26.2 和 26.3 分别至少需要 26.1.2.122、26.2.0.93 和 26.3.0.100。Fabric 26.3 至少需要 Fabric API 0.165.2+26.3。
- 其他 Minecraft 版本(1.21.2 至 1.21.10、26.1、26.1.1):请使用 Pipster 1.2.0。该版本仍可用且保持正常工作。若 Issue Tracker 中有足够多的玩家请求,才会重新构建后续版本的文件。申请 Minecraft 版本支持

2026-11-14 对 1.4.1 的开发版(不含后续的 crafter 规则)与 1.3.0 进行了性能对比测试(Intel Core i7-13700H,50,000 根管道,500 个活跃端口,1.21.1 和 26.3 版本,两种加载器交替运行):无明显差异。平均每次 tick 耗时约 2.5 至 3.0 ms,第 95 百分位数为 4.1 至 4.9 ms(各轮次的中位数)。以下数据是为 1.1.0 版本测得的结果。
在 Intel Core i7-13700H 上,使用专用的 1.21.1 和 26.3 服务器(两种加载器)对 1.1.0 进行测试的结果:
- 10,000 根空闲管道:每次 tick 约 0.01 ms
- 10,000 根管道,100 个活跃端口:每次 tick 约 0.8 至 1.2 ms(第 95 百分位数)
- 50,000 根管道,500 个活跃端口:每次 tick 约 3.4 至 5.0 ms(第 95 百分位数)
将 1.2.0 与 1.1.0 进行对比(同一台机器,50,000 根管道,500 个活跃端口,交替运行):在 1.21.1(两种加载器)和 26.3 Fabric 上,每次 tick 耗时减少 8% 至 11%;在 26.3 NeoForge 上无显著变化;在 1.21.1 Fabric 上,每次 tick 的内存占用减半以下。
以上仅基于单台机器和少量测试场景,并非对所有服务器的保证。

- Fabric: 需要 Fabric API。Team Reborn Energy 已包含在内。
- NeoForge: 无需其他依赖。
- 需同时安装于客户端和服务器端。
- 可选依赖:Jade、WTHIT、JEI、REI、CC: Tweaked、Open Parties and Claims、FTB Chunks、Flan、FTB Teams、权限类模组、Create、Mekanism。


您可以将 Pipster 包含在任何整合包中,无论是公开还是私有,免费还是付费,只要 jar 文件保持与原发布版本完全一致即可。

Pipster 由 cptgummiball 制作。保留所有权利:禁止在整合包之外修改、反编译或重新上传 Pipster。模组开发者可以使用 Pipster API 进行编译。完整许可证:
Pipster
Readable pipes for items, fluids, gas and energy, with filters right at the port, channel-based tesseracts and the Energy Pulse Amplifier. Works on Fabric and NeoForge.
New in 1.4.1: quicker wrench controls, separate filters for insert and extract, a choice of the target block's face (brewing stand: ingredients only from the top), and pasting a profile also installs the cards from your inventory. New optional support for JEI and REI (drag an item or fluid into a filter field), WTHIT and Flan. Worlds from 1.3.0 load without conversion. 1.4.1 is made for Minecraft 1.21.1, 1.21.11, 26.1.2, 26.2 and 26.3 (26.3 now needs Fabric API 0.165.2 or NeoForge 26.3.0.100); for other versions, Pipster 1.2.0 stays available.

- Pipes look like pipes. Every pipe and cable is a real, narrow shape (no full blocks), with a bolted flange where it connects to a machine. The tube shows the kind, the colour of the node and flange shows the tier.
- Four kinds, five tiers. Item pipes, fluid pipes, gas pipes and energy cables, each from Copper (T1) to Quantum (T5), and energy cables up to Singularity (T6). Upgrade placed pipes in place with a bolt; they keep their settings and contents.
- Filters live in the port. No filter blocks in the way. Put a filter card straight into the port where the pipe meets the machine.
- Tesseracts. Send resources through named channels: any distance in one dimension (Resonant) or across all dimensions (Quantum).
- Overcharge. The Energy Pulse Amplifier stores energy and releases it in short, powerful pulses.
- Built for servers. Everything runs on the server in bounded steps. Pipes do not tick, and Pipster never loads chunks.

How to recognise them (new look in 1.3.0): item pipes are square copper tubes, fluid pipes round iron-grey tubes, gas pipes round petrol (dark teal) tubes, and energy cables narrower square anthracite cables with fine insulation rings. The node in the middle and the flange show the tier colour (in brackets below). A flange with four bolts only where a pipe meets a machine; between two pipes a slim coupling. Throughput, tiers, recipes and behaviour did not change.
- Copper (copper): 2 items/t, 100 mB/t, 1,000 E/t
- Reinforced (gold): 8 items/t, 400 mB/t, 8,000 E/t
- Precision (emerald green): 32 items/t, 1,600 mB/t, 64,000 E/t
- Resonant (lapis blue): 128 items/t, 6,400 mB/t, 512,000 E/t
- Quantum (amethyst purple): 512 items/t, 25,600 mB/t, 4,096,000 E/t
- Singularity (redstone red, energy cables only): 32,768,000 E/t
- Supercalifragilisticexpialidocious Energy Cable (magenta with white bolts, creative only): 1,000,000,000,000 E/t; no recipe, drops nothing
Gas pipes move as much gas per tick as fluid pipes move mB. Throughput is shared per pipe segment, so a bottleneck is a real bottleneck. Nothing ignores limits: even the creative cable has a finite rate, and a thinner cable between two of them keeps its own limit.

Controls since 1.4.1 (default):
- Right-click a port: next mode (insert, extract, both, off).
- Sneak + right-click a port: open the port screen.
- Left-click an arm: disconnect it; left-click the same side of the centre again to reconnect. The wrench never breaks pipes by left-click.
- Sneak + left-click a port: paste the active copy profile.
- Sneak + right-click the centre: dismantle the pipe. Sneak + right-click into the air: next copy profile.
Classic controls (Pipster 1.3.0 and older, or 1.4.1 with wrenchClassicControls=true in config/pipster-server.properties):
-
Right-click a port: open the port screen; set the mode there.
-
Sneak + right-click an arm: disconnect it; sneak + right-click the same side of the centre again to reconnect.
-
Sneak + right-click the centre: dismantle the pipe. Sneak + right-click into the air: next copy profile.
-
Paste with the Paste button in the port screen. Left-click: with classic controls in 1.4.1 it does nothing; in 1.3.0 and older it breaks the pipe like any item.
-
Port screen: redstone control, priority, distribution (round robin, nearest, sticky), the face of the target block, and a status line that says why nothing moves.
-
Accept port: a side next to a block that pushes but has no storage of its own (AE2 Export Bus, Create funnels, Oritech item and fluid pipes) can be set to Accept. It takes what the block pushes in and never pulls.
-
Copy and paste port settings with 3 profiles. Since 1.4.1, pasting also moves matching filter and rule cards from your inventory into the port; cards are never created.
-
Crafters (since 1.4.1): pipes fill a crafter evenly, one item per slot, and take the result it pushes out of its front; they never empty its crafting grid.

- Basic (9 rules): exact item, fluid or gas; allowlist or denylist
- Advanced (27 rules): tags, whole mods, exact components such as enchantments
- Precision (54 rules): "keep 64 in the source", "fill the target up to 256"
- Rule Card: per-port rate limit and energy reserve
Patterns are ghost items: nothing is used up.
Fluid and gas pipes have a filter field with suggestions. Type a name and pick a fluid, gas or (with Mekanism) chemical from the list, no filled container needed. # lists tags, "Everything from <mod>" covers a whole mod, and entries with the same name show their mod in brackets.

- Resonant Tesseract: any distance, same dimension, T4 speed
- Quantum Tesseract: all dimensions of the server, T5 speed
- One channel per resource type per tesseract, private, invite-only or public, filters per side

The Energy Pulse Amplifier takes energy evenly, stores it at 90 % efficiency and releases it for a short time at a higher rate than it takes. It never creates energy.
- Front = output, every other side = input. The pulse respects the cable at the front, so a thin cable limits it; on Singularity and creative cables the amplifier's own pulse limit applies.
- Capacitor Banks around it add capacity and pulse power (up to 8 banks).
- Modes: Auto, Charge, Pulse (fired by redstone or the Fire button).
- Screen: stored energy, input and output per tick, efficiency, banks, pulse limit, mode, status (Charging, Ready, Pulsing, Empty).
- Looks and sounds: a coil that spins faster with the charge and glows during a pulse, charge lights, sparks and own sounds.
- Defaults (server config): 1,000,000 E store, +1,000,000 E per bank, 16,000 E/t input, pulse 32,000 E/t + 4,000 E/t per bank.
- Breaking it keeps the energy in the item; creative pick-block never copies it.


- Pipster: readable pipes for items, fluids, gases and energy.
- QNet: industry, power, storage, logistics and dimensional extraction in one mod.
Pipster itself needs none of them.

Pipster connects to other mods through the standard interfaces of each loader:
- Fabric: Transfer API for items and fluids, Team Reborn Energy for energy (included). Extract ports actively pull energy (can be switched off in the config).
- NeoForge: item, fluid and energy capabilities
- Gas: Pipster's own small gas API, fluids you tag as
#pipster:gaseous, and Mekanism chemicals (NeoForge 1.21.1)
Gaseous fluids of Ad Astra, Modern Industrialization and Tech Reborn travel in gas pipes (optional entries in the gas tag, since 1.4.1).
Tested Compatibility
Tested with real mod JARs on dedicated servers and clients, including automated game tests that transfer items, fluids and energy through supported blocks and back without loss or duplication. Availability varies by Minecraft version and loader.
- Storage Drawers: Drawers and compacting drawers.
- Sophisticated Storage: NeoForge on all five versions; Fabric 1.21.1 (unofficial port).
- Energized Power: Battery box and fluid tank.
- Oritech: Energy storage and tank.
- Powah!: Energy cell, including NeoForge 26.2 and 26.3.
- Mekanism: Energy cube, fluid tank and chemicals through gas pipes (NeoForge 1.21.1).
- Create: Fluid tank; the Mechanical Arm can target item pipes (NeoForge 1.21.1).
- Tech Reborn: Fabric 1.21.1, 26.1.2, 26.2 and 26.3.
- Carry On: All five Minecraft versions.
- Tom's Simple Storage: All five Minecraft versions.
- Applied Energistics 2 (also with Applied Mekanistics) and Immersive Machinery: Start and run alongside Pipster.
Not every block of these mods is covered. Please report compatibility issues.
Built-in Optional Integrations
These integrations activate automatically when the corresponding mod is installed. None of these mods are required to use Pipster.
- Jade: Displays port modes and status, accessible tesseract channels, and pulse amplifier charge and status.
- WTHIT: Additional information about Pipster blocks and their status.
- JEI and REI: Recipe viewer integration.
- Flan: Claim protection integration.
- CC: Tweaked: Computers can read pipes, tesseracts and pulse amplifiers. Ports can be controlled using the "Computer" redstone mode.
- Open Parties and Claims (OPAC) and FTB Chunks: Pipes respect land claims and cannot extract from protected inventories without permission.
- FTB Teams and OPAC parties: Teammates can share channels, tesseracts and pipes, including previously placed ones.
- LuckPerms and other permission mods: Support for the
pipster.admin and pipster.command permission nodes. Operators retain these permissions without an additional permission mod.
- Wrench compatibility: The Conduit Wrench is recognized as a wrench by compatible mods.
Integration availability depends on the Minecraft version and loader. FTB Chunks and FTB Teams are supported on Minecraft 1.21.1, 1.21.11 and 26.1.2.
For exact versions and testing details, see Supported-Versions.

Minecraft 1.21.1, 1.21.11, 26.1.2, 26.2 and 26.3, Fabric and NeoForge. One file per Minecraft version and loader. Before release, each file is tested on its version: client and server start, automated game tests for transport, throughput limits, filters, tesseracts, the pulse amplifier, claims and teams, saving and loading, plus runs with the partner mods above.
Release check of the ten 1.4.1 files: passed on 2026-11-16: each of the ten files on its Minecraft version (dedicated server, client, all game tests) and with the partner mods of that version. 318 runs passed, none failed; 10 runs could not take place because Open Parties and Claims cannot start on a game-test server (it is checked on the dedicated server instead).
- 1.21.1: pipster-1.4.1+mc1.21.1-fabric.jar, pipster-1.4.1+mc1.21.1-neoforge.jar
- 1.21.11: pipster-1.4.1+mc1.21.11-fabric.jar, pipster-1.4.1+mc1.21.11-neoforge.jar
- 26.1.2: pipster-1.4.1+mc26.1.2-fabric.jar, pipster-1.4.1+mc26.1.2-neoforge.jar
- 26.2: pipster-1.4.1+mc26.2-fabric.jar, pipster-1.4.1+mc26.2-neoforge.jar
- 26.3: pipster-1.4.1+mc26.3-fabric.jar, pipster-1.4.1+mc26.3-neoforge.jar
- NeoForge 26.1.2, 26.2 and 26.3 need at least 26.1.2.122, 26.2.0.93 and 26.3.0.100. Fabric 26.3 needs at least Fabric API 0.165.2+26.3.
- Other Minecraft versions (1.21.2 to 1.21.10, 26.1, 26.1.1): use Pipster 1.2.0. It stays available and keeps working. Builds for further versions only come back if enough players ask for them in the issue tracker. Request a Minecraft version

The development build of 1.4.1 (without the later crafter rule) was measured against 1.3.0 on 2026-11-14 (Intel Core i7-13700H, 50,000 pipes with 500 active ports, 1.21.1 and 26.3, both loaders, alternating runs): no measurable difference. It needed about 2.5 to 3.0 ms per tick on average and 4.1 to 4.9 ms in the 95th percentile (medians of the rounds). The numbers below were measured for 1.1.0.
Measured for 1.1.0 on an Intel Core i7-13700H with dedicated 1.21.1 and 26.3 servers, both loaders:
- 10,000 idle pipes: about 0.01 ms per tick
- 10,000 pipes with 100 active ports: about 0.8 to 1.2 ms per tick (95th percentile)
- 50,000 pipes with 500 active ports: about 3.4 to 5.0 ms per tick (95th percentile)
1.2.0 compared with 1.1.0 (same machine, 50,000 pipes with 500 active ports, alternating runs): 8 to 11 % less time per tick on 1.21.1 (both loaders) and 26.3 Fabric, no measurable change on 26.3 NeoForge, and less than half the memory per tick on 1.21.1 Fabric.
That is one machine and a few test scenes, not a promise for every server.

- Fabric: Fabric API. Team Reborn Energy is included.
- NeoForge: nothing else.
- Install on both client and server.
- Optional: Jade, WTHIT, JEI, REI, CC: Tweaked, Open Parties and Claims, FTB Chunks, Flan, FTB Teams, a permission mod, Create, Mekanism.


You may include Pipster in any modpack, public or private, free or paid, as long as the jar files stay exactly as published.

Pipster is made by cptgummiball. All rights reserved: modifying, decompiling or re-uploading Pipster outside of modpacks is not allowed. Mod developers may compile against the Pipster API. Full license:
评论 0
登录后参与评分
还没有评论,来抢沙发吧