大型 SWEM 马群,流畅的帧率。
SwemCull 让 SWEM 的马匹在游戏中的负担大幅减轻。
你的马看起来完全一样。只是游戏不再卡顿。
Minecraft 1.21.1 (NeoForge) 和 1.20.1 (Forge & NeoForge) · 仅限客户端,适用于任何服务器 · 需要安装 SWEM 或 SWEM Lite
功能介绍
- ? 大群中依然流畅 — 当你站在 32 匹全副武装的马中间时,帧率几乎提升两倍。
- ? 远处的马几乎不消耗性能 — 远处的马保留所有装备并正常移动,但你的游戏几乎察觉不到它们的存在。(1.21.1)
- ? 隐藏的马匹不造成卡顿 — 在马厩内、墙后或你身后的马不会被渲染,因此不会拖慢速度。栅栏、大门和玻璃不会遮挡马匹。
- ? 马粪不会造成卡顿 — SWEM 会一直绘制每一堆马粪,且这些马粪永远不会自行消失。SwemCull 仅绘制你能看到的马粪,且效率更高。
- ? 装备不再闪烁 — 马鞍、毯子和腿部绑带在远处不再闪烁。
- ? 缩放功能正常 — 使用望远镜或缩放模组观察时,马匹的细节依然保持清晰。
- ? 你的马是安全的 — 你骑乘、牵引或注视的马始终保持完整细节。
- ? 设置一次,无需操心 — 默认即为“平衡”模式。想要更高的帧率?只需一条命令即可切换其他预设。
- ?️ 与 SWEM 更新兼容 — 如果 SWEM 的更新改变了某些内容,SwemCull 仅关闭受影响的部分并在聊天栏提示你。你的马匹仍能正常工作。
性能提升幅度
| 32 匹全副武装的马 |
无 SwemCull |
启用 SwemCull ⭐ |
| 站在马群中 |
35 FPS |
100 FPS |
| 距离 30 格 |
35 FPS |
约 1050 FPS |
| 距离 60 格 |
35 FPS |
约 1400 FPS |
| 位于墙后 |
35 FPS |
约 2100 FPS |
基于 Minecraft 1.21.1,1080p 分辨率,“平衡”预设,使用 /swemcull advanced benchmark 测量。
在远处和墙后,你仍然能看到每匹马及其所有装备——只是不再占用帧率。1.20.1 在远处的性能提升幅度较小。
预设方案
使用 /swemcull preset <name> 选择一个预设。数值单位为格(方块)。
| 预设名称 |
小型装备移除距离 |
鬃毛与尾巴移除距离 |
马匹移除距离 |
适用场景 |
| quality |
48 |
从不 |
从不 |
画质优先 |
| light |
34 |
50 |
92 |
难以察觉 |
| balanced ⭐ |
24 |
36 |
80 |
大多数玩家(默认) |
| aggressive |
14 |
22 |
56 |
大型马厩 |
| extreme |
6 |
10 |
36 |
帧率至上 |
在 1.21.1 中,远处的站立或行走的马匹无论如何都会保留所有装备。
指令
/swemcull — 显示当前状态以及你的马匹运行情况。
/swemcull preset — 选择预设方案。
/swemcull adaptive 60 — 自动维持 60 FPS。/swemcull adaptive off 可关闭此功能。
/swemcull overlay — 一个小窗口,显示你的帧率及马匹的处理情况。
/swemcull toggle — 立即开启或关闭 SwemCull,方便你进行对比。
/swemcull advanced — 其他高级功能,每次一项。
在 NeoForge 1.21.1 上,所有设置也可在“模组”菜单中找到。配置文件为 config/swemcull-client.toml。
兼容性
- ? SWEM, SWEM Lite, SWEM Addendum 和 Addendum Plus — 包括所有 Addendum 品种。
- ? Iris 和 Oculus 光影 — 马匹保留阴影效果。
- ⚡ Sodium, Embeddium, ImmediatelyFast, ModernFix, FerriteCore — 与 SwemCull 协同工作。
- ? EntityCulling — 可与 SwemCull 共存。EntityCulling 本身不会隐藏 SWEM 的马匹;这是 SwemCull 的功能。
- ? Zoomify, Ok Zoomer 和其他缩放模组 — 放大后的马匹细节依然保持清晰。
- ?️ Xaero's Minimap 和 World Map — 马粪不再填满你的地图。
/swemcull advanced minimappoop on 可将其恢复显示。
- ? 任何服务器 — 仅限客户端。服务器端无需安装,安全地添加到现有世界中即可。
你还需要: SWEM 或 SWEM Lite、GeckoLib,以及 Player Animation Library(SWEM 需要它,但没注明)。在 NeoForge 1.20.1 上,请使用 Player Animation Library 的 Forge 版本——目前没有 NeoForge 版,但 Forge 版可以正常工作。
常见问题
为什么 SWEM 这么卡?
一匹 SWEM 马是一个细节非常丰富的模型,而且每副马具都有独立的贴图。一群装备齐全的马对你的游戏来说,负担比大多数完整建筑都要大。此外,SWEM 还会在你身后或墙后渲染马匹。
如何在使用 SWEM 时提升帧率?
安装 SwemCull 即可。默认预设能让一群体型完整的马群帧率提升近三倍,而远处的马几乎不消耗性能。如果需要更高帧率?试试 /swemcull preset aggressive。
我的马外观会变吗?
近距离看不会。在 1.21.1 中,远处的马会保留所有马具。骑乘状态下的马、幼驹、带翅膀的马,以及所有 1.20.1 版本的马,在距离过远且肉眼难以分辨时,会先逐渐丢失小型马具,随后鬃毛和尾巴也会淡出——它们是渐隐消失,而不是突然弹出。使用望远镜拉近视角后,一切都会恢复。
服务器端需要安装吗?
不需要。SwemCull 仅作用于客户端,在任何服务器上都能工作。
我走路时马匹会忽隐忽现。
使用 /swemcull advanced cull 92 让它们停留更久,或者使用 /swemcull preset light。
绕到墙角时,马出现得太晚。
使用 /swemcull advanced occlusion off 关闭遮挡剔除。其他功能照常运行。
身后的马仍然占用帧率。
它们并未被渲染。剩余的性能消耗来自游戏移动它们的位置(在单人游戏中,游戏内置服务器还在运行它们的 AI)。SwemCull 仅改变渲染行为,这是有意为之。/swemcull toggle 可以验证这一点:如果你的帧率没有变化,那就不是渲染的问题。
我的 Addendum 马变成纯黑色了。
这是因为缺少材质包。Addendum 的品种本身不包含皮毛纹理——你需要从 Addendum 页面链接的社区资源包中获取。/swemcull toggle 可以确认:如果关闭 SwemCull 后它们仍然是黑色的,那就不是 SwemCull 的问题。
聊天提示 SwemCull 为我的 SWEM 关闭了某项功能。
你的 SWEM 版本发生了变更,导致某个功能不再适用,因此该功能已关闭,你的马显示为 SWEM 默认的绘制效果。/swemcull 命令会显示具体是哪个功能以及原因。通常更新 SwemCull 后即可恢复。
我可以在整合包中使用它吗?
可以!SwemCull 采用 LGPL-3.0 协议,欢迎用于整合包。
由 ItzAdoman 制作 · adoman.eu · LGPL-3.0
未与 SWEM 或 GeckoLib 关联,也不包含任何他们的代码。
Big SWEM herds, smooth FPS.
SwemCull makes SWEM horses much lighter for your game.
Your horses look exactly the same. Your game just stops lagging.
Minecraft 1.21.1 (NeoForge) and 1.20.1 (Forge & NeoForge) · only on your side, works on any server · needs SWEM or SWEM Lite
What it does
- ? Smooth in a big herd — standing in the middle of 32 horses with full tack, your FPS almost triples.
- ? Far horses cost almost nothing — horses far away keep all their tack and still move, but your game barely notices them. (1.21.1)
- ? No lag from hidden horses — horses inside a barn, behind a wall or behind you aren't drawn, so they don't slow you down. Fences, gates and glass don't hide horses.
- ? Horse poop doesn't lag — SWEM draws every pile all the time, and piles never go away on their own. SwemCull draws only the ones you can see, and much faster.
- ? No flickering tack — saddles, blankets and leg wraps no longer flicker at a distance.
- ? Zoom works — look through a spyglass or a zoom mod and horses stay detailed.
- ? Your horse is safe — the horse you ride, lead or look at always stays in full detail.
- ? Set it and forget it — Balanced is on from the start. Want more FPS? Pick another preset with one command.
- ?️ Safe with SWEM updates — if a SWEM update changes something, SwemCull switches off only that part and tells you in chat. Your horses keep working.
How much faster
| 32 horses with full tack |
Without |
With SwemCull ⭐ |
| Standing in the herd |
35 FPS |
100 FPS |
| 30 blocks away |
35 FPS |
~1050 FPS |
| 60 blocks away |
35 FPS |
~1400 FPS |
| Behind a wall |
35 FPS |
~2100 FPS |
Minecraft 1.21.1, 1080p, Balanced preset, measured with /swemcull advanced benchmark.
Far away and behind walls you still see every horse with all its tack - it just doesn't cost you FPS. 1.20.1 gets a smaller boost far away.
Presets
Pick one with /swemcull preset <name>. Numbers are blocks.
| Preset |
Small tack goes |
Mane & tail go |
Horse goes |
Best for |
| quality |
48 |
never |
never |
Looks first |
| light |
34 |
50 |
92 |
Hard to notice |
| balanced ⭐ |
24 |
36 |
80 |
Most players (default) |
| aggressive |
14 |
22 |
56 |
Big stables |
| extreme |
6 |
10 |
36 |
FPS above everything |
On 1.21.1, far horses that are standing or walking keep all their tack anyway.
Commands
/swemcull — shows what's on and how your horses are doing.
/swemcull preset — pick a preset.
/swemcull adaptive 60 — keeps you at 60 FPS by itself. /swemcull adaptive off to stop.
/swemcull overlay — a small box with your FPS and what happens to your horses.
/swemcull toggle — turns SwemCull off and on right away, so you can compare.
/swemcull advanced — everything else, one feature at a time.
On NeoForge 1.21.1 everything is also in the Mods menu. The settings file is config/swemcull-client.toml.
Works with
- ? SWEM, SWEM Lite, SWEM Addendum and Addendum Plus — every Addendum breed too.
- ? Iris and Oculus shaders — horses keep their shadows.
- ⚡ Sodium, Embeddium, ImmediatelyFast, ModernFix, FerriteCore — work together with SwemCull.
- ? EntityCulling — works alongside. It never hid SWEM horses by itself; SwemCull does.
- ? Zoomify, Ok Zoomer and other zoom mods — zoomed horses stay detailed.
- ?️ Xaero's Minimap and World Map — horse poop no longer fills your map.
/swemcull advanced minimappoop on brings it back.
- ? Any server — only on your side. Nothing to install on the server, safe to add to an existing world.
You also need: SWEM or SWEM Lite, GeckoLib, and Player Animation Library (SWEM needs it but doesn't say so). On NeoForge 1.20.1, use the Forge version of Player Animation Library - there isn't a NeoForge one, and the Forge one works.
Questions
Why does SWEM lag so much?
A SWEM horse is a very detailed model, and every piece of tack has its own texture. A herd of fully tacked horses is more work for your game than most whole builds. SWEM also draws its horses when they're behind you or behind a wall.
How do I get more FPS with SWEM?
Install SwemCull - that's it. The default preset almost triples your FPS in a tacked herd, and far horses cost almost nothing. Need even more? Try /swemcull preset aggressive.
Will my horses look different?
Not up close. On 1.21.1, far horses keep all their tack. Ridden horses, foals, horses with wings, and all horses on 1.20.1 slowly lose small tack and then the mane and tail far away, when they're too small to see anyway - they fade out, they don't pop. Zoom in with a spyglass and everything comes back.
Does the server need it?
No. SwemCull is only on your side and works on any server.
Horses pop in and out as I walk.
Let them stay longer with /swemcull advanced cull 92, or use /swemcull preset light.
A horse appears late when I walk round a corner.
Turn off hiding behind walls with /swemcull advanced occlusion off. Everything else keeps working.
Horses behind me still cost FPS.
They aren't being drawn. What's left is the game moving them around (in singleplayer, the game's own server also runs their AI). SwemCull only changes drawing, on purpose. /swemcull toggle shows it: if your FPS doesn't change, it isn't the drawing.
My Addendum horses are solid black.
That's a missing texture pack. Addendum's breeds come without coat textures - you get them from a community resource pack linked on Addendum's page. /swemcull toggle confirms it: if they stay black with SwemCull off, it isn't SwemCull.
Chat says SwemCull turned something off for my SWEM.
Your SWEM version changed in a way one feature doesn't fit anymore, so that one is off and your horses look the way SWEM draws them. /swemcull shows which one and why. A SwemCull update usually brings it back.
Can I use it in my modpack?
Yes! SwemCull is LGPL-3.0 and modpacks are welcome.
Made by ItzAdoman · adoman.eu · LGPL-3.0
Not affiliated with SWEM or GeckoLib, and includes none of their code.
评论 0
登录后参与评分
还没有评论,来抢沙发吧