Temperature Block 更新日志 ?
我们将一个简单的温度方块打造成了响应式环境传感器——它不再仅仅显示温度,而是会对周围的世界做出反应。该模组为建筑带来了动态的热力学逻辑和生动的视觉反馈,让你一眼就能掌握热量分布情况。
✅ 新增内容:更智能的温度检测与视觉反馈
我们优化了 Temperature Block 读取和适应周围环境的方式:
- 方块现在会根据生物群系的热值计算其基础温度,并根据附近的热源或冷源进行调整——岩浆增加 +50,火焰增加 +30,水则减少 −20。
- 温度数值被严格限制在 0 到 400 之间,确保所有建筑的体验一致且可预测。
- 颜色渐变从蓝色(冷)平滑过渡到绿色,再到红色(热),直观地展示方块的热状态。
? 精细调校的颜色逻辑:无缝的热力渐变
我们优化了颜色渲染效果,使温度变化更加自然且易于阅读:
- 低于 200 时,方块会从深蓝渐变到亮绿,突出显示较冷的区域。
- 高于 200 时,它会从绿色过渡到强烈的红色,清晰地标出高温区域。
- 颜色是根据每个方块的状态单独计算的,因此每个 Temperature Block 都能反映其自身的热值,无需依赖外部叠加层。
? 提示: 将 Temperature Blocks 用于红石电路或热力监测装置中——可见的颜色变化能让你轻松发现温度飙升或下降,而无需额外工具。
? 底层改进:清爽的客户端渲染
我们精简了模组的渲染逻辑,以保持视觉效果流畅且性能稳定:
- 方块颜色处理完全通过
RegisterColorHandlersEvent 在客户端运行,从而保持服务器的轻量级。
- 颜色计算使用简单高效的混合函数,在所有支持的版本中都能可靠工作。
- 物品默认颜色设为中性绿色,方便你在物品栏中快速找到该方块。
⚠️ 重要警告:热力设置与性能
Temperature Block 旨在保持轻量级,但大规模的热力显示仍可能影响客户端性能:
- 如果在配置较低的硬件上运行,请避免在单个区域内放置数百个 Temperature Blocks —— 持续的颜色更新可能会影响帧率(FPS)。
- 如果注意到卡顿或延迟,尝试减少活跃方块的数量或增加它们之间的间距。
- 在将其添加到主要建筑之前,始终在新的世界中测试新的热力布局。
? 提示:安全测试热力区域
在设计热力监测装置时:
- 先从 5–10 个小规模的测试区域开始,观察温度值和颜色的表现。
- 将方块放置在已知的热源或冷源附近(如岩浆或水),以确认调整效果符合预期。
- 检查颜色渐变,确保从蓝色到红色的过渡看起来平滑且易读。
- 如果感觉不对劲,破坏并重新放置该方块——这能确保状态清洁,并有助于隔离任何意外行为。
? 兼容性
- 平台:Minecraft NeoForge。
- 加载器:仅支持 NeoForge(不支持 Forge 和 Fabric)。
What’s new in Temperature Block? ?
We’ve turned a simple thermal block into a responsive environmental sensor — now it doesn’t just show temperature, it reacts to the world around it. The mod brings dynamic thermal logic and vivid visual feedback to your builds, letting you track heat distribution at a glance.
✅ What’s new: smarter temperature detection and visual response
We’ve refined how Temperature Block reads and adapts to its surroundings:
- The block now calculates its base temperature from the biome’s thermal value, then adjusts it based on nearby heat or cold sources — lava adds +50, fire adds +30, and water subtracts −20.
- Temperature values are capped cleanly between 0 and 400, so every build stays consistent and predictable.
- The color gradient shifts smoothly from blue (cold) through green to red (hot), giving an instant visual readout of the block’s thermal state.
? Fine-tuned color logic: seamless thermal gradients
We’ve optimized the color rendering to make temperature changes feel natural and easy to read:
- Below 200, the block blends from deep blue to bright green, highlighting cooler zones.
- Above 200, it transitions from green to intense red, clearly marking hot areas.
- The color is calculated per-block state, so each Temperature Block reflects its own thermal value without relying on external overlays.
? Tip: Use Temperature Blocks in redstone circuits or thermal monitoring setups — the visible color shift makes it easy to spot temperature spikes or drops without extra tools.
? Under-the-hood improvements: clean client-side rendering
We’ve streamlined the mod’s rendering logic to keep visuals smooth and performance stable:
- Block color handling runs entirely on the client via
RegisterColorHandlersEvent, so the server stays lightweight.
- The color calculation uses a simple, efficient blend function that works reliably across all supported versions.
- Item color is set to a neutral green by default, making the block easy to spot in your inventory.
⚠️ Important warning: thermal setups and performance
Temperature Block is designed to be lightweight, but large-scale thermal displays can still affect client performance:
- Avoid placing hundreds of Temperature Blocks in a single area if you’re running on lower-end hardware — the constant color updates can impact FPS.
- If you notice lag or stuttering, try reducing the number of active blocks or spacing them out more.
- Always test new thermal layouts in a separate world before adding them to your main build.
? Tip: safe testing with thermal zones
When designing thermal monitoring setups:
- Start with a small test area of 5–10 blocks to see how the temperature values and colors behave.
- Place blocks near known heat or cold sources (like lava or water) to confirm the adjustments work as expected.
- Check the color gradient to make sure the transition from blue to red looks smooth and readable.
- If something feels off, break and re-place the block — this ensures a clean state and helps isolate any unexpected behavior.
? Compatibility
- Platform: Minecraft NeoForge.
- Loader: NeoForge only (Forge and Fabric are not supported).
评论 0
登录后参与评分
还没有评论,来抢沙发吧