欢迎来到 UBER HARD CRAFT!
本模组旨在大幅重塑 Minecraft 的进度系统,其风格类似于 RLCraft 和 Better Than Wolves。
目前……
本模组仍处于非常早期的开发阶段,因此我们非常欢迎提交错误报告、反馈意见、功能请求或任何其他形式的帮助!你可以通过 Discord 找到我们。
迄今为止已更改的内容?
强烈建议你在不了解剧情的情况下开始游戏;如果你需要帮助,可以参考画廊页面上的图片以获取一些提示。本模组包含进度(advancements),并且设计为无需指南即可游玩。然而,如果你感到好奇:
指南
燧石时代
燧石板是制作燧石工具的关键,其合成方式如下:

合成后,将燧石板放置在地面上,并用石头砸碎它。手持筛子挖掘泥土即可获得石头。砸碎燧石板会得到一个工具头,将其与树皮纤维和木棍合成即可制成燧石工具。不使用斧头砍伐树木可以获得树皮纤维和木棍。
窑炉 [多块结构]
建造窑炉现在是推进到铜制工具的必经之路。
窑炉的结构图可在画廊中查看:

窑炉的中心是窑炉火,其合成方式如下:

开始建造时,将火放置在由任意原木组成的 3x3 基座的中心。接下来,你必须构建一个垂直的上层结构,以完全从外部包围窑炉火。该结构的合法方块包括:窑炉方块、窑炉舱门、窑炉通风口。
窑炉架放置在结构内部,可选但非必需。
以下是窑炉组件块的合成配方:

最后,确保有一条由窑炉通风口组成的路径从窑炉火连接到空气方块。现在你可以使用点火器点燃窑炉火。
要实际使用窑炉冶炼铜,你需要按如下方式坩埚:

合成后,将陶土坩埚放入窑炉内,并确保窑炉火已被点燃。等待基座上的至少 4 根原木转化为煤块。之后,陶土坩埚应该会被烧制完成。现在你可以将生铜放入坩埚并再次关闭窑炉。等待基座上的至少 6 根原木转化为煤块,然后再次打开窑炉,铜应该已经熔化。现在最关键的一步是使用钳子拿起坩埚并将其倒入模具中。空白模具可以用两个粘土球和一个沙子合成,并可以使用工具头进行压印以制作特定种类的模具。
其他配方:
木制钳子、点火器和筛子:

UBER HARD CRAFT 的目标!
- 最小化进度系统中 GUI 和其他 UI 的使用
- 通过添加不同的独特且复杂的路径,使进度更难且更丰富
- 与 Create 等其他模组兼容以增强体验
Welcome to UBER HARD CRAFT!
This mod attemps to drastically overhual the progression fo minecraft in a similar vain to RLCraft and Better Than Wolves.
Currently...
this mod is in very early development meaning bugs reports, feedback, feature requests, or any other ways to help would be appreciated! You can find us on Discord.
What has been changed so far?
Its highly reccomended to go in blind, and if you need help you can refer to the images on the gallery page for some pointers. The mod includes advancments and is supposed to be doable without a guide. However, if your curious:
Guide
Flint Age
Flint plates are the key to flint tools, they are crafted like so:

Once crafted, place the plate on the ground and smash it with a rock. Rocks can be obtained by breaking dirt while hold a sift. Smashing the plate yeilds a tool head which can be crafted with a bark fiber and stick to create a flint tool. Bark fiber and sticks can be obtained by breaking trees without an axe.
- Pro tip, the sift can be used to increase you flint rates as well!
Kiln [Multiblock]
Building a kiln is now required to progress to copper tools.
A diagram for a kiln can be seen in the gallery:

The center of the kiln is the kiln fire, which can be crafted like so:

To begin construction, place the fire in the center of a 3 by 3 base of any log. Next, you must build a vertical superstucture to completley contain the kiln fire from the outside. Valid blocks for the structure are: Kiln Block, Kiln Hatch, Kiln Vent.
The Kiln Rack is placed on the inside of the structure, and is permitted but not required.
Here are the recipes for the Kiln Blockset:

Finally, ensure that there is a path of Kiln Vents that leads from the kiln fire to an air block. Now you can light your kiln fire using the firestarter item.
To actually smelt copper using the Kiln, you must craft a crucible like so:

Once crafted, place the clay crucible inside of the Kiln and ensure that the kiln fire is ingnited. Now, wait until at least 4 of the logs on base have been converted to coal blocks. After that, the clay crucible should be fired. Now you can deposit your raw copper inside of the crucible and close the kiln again. Wait until at least 6 of the logs on the base have been converted to coal blocks and open the kiln again, the copper should be melted. Now the most important step is to use tongs to pick up the crucible and pour it into a mold. A blank mold can be crafted with two clay balls and one sand, and can be imprinted with a tool head to make a mold of that variety.
Other Recipes:
Wooden tongs, firestarter, and sift:

Goals of UBER HARD CRAFT!
- Minimize the use of GUIs and other UIs in progression
- Make progression harder and more expansive by adding different unique and complex paths
- Compact with other mods such as create to enhance the experience
评论 0
登录后参与评分
还没有评论,来抢沙发吧