
通过易于使用的界面放置、摆姿势和为盔甲架穿衣。只需右键点击盔甲架即可编辑它们!
在服务器上,玩家要么需要 OP 权限,要么需要通过命令 /armorstands add playername 被显式添加。

实用技巧
- 当盔甲架 UI 打开时,你仍然可以自由移动!使用你的常规按键来移动和跳跃,如果想解锁视角,只需按住 ALT 键即可!
- 该模组自带剪贴板和撤销/重做系统。适用典型的键盘快捷键,或使用左上角的按钮。
- 如果你同时处理多个盔甲架,可以高亮显示当前的一个!该模组包含一个键绑定(你需要为其分配一个按键!),用于在 UI 打开时高亮显示盔甲架。
- 如果盔甲架位于重力开启的方块内,它会掉落下来!这是原版机制,在某些情况下,盔甲架可能会一直掉穿基岩层。
- 撤销/重做功能对于测试特性特别有帮助!尝试按下某个按钮看看它的作用,然后简单地 撤销 它去尝试其他操作!
- 你可以通过点击右上角的按钮或使用键盘上的 1-6 键在不同屏幕之间导航。
屏幕
工具 — 快速设置操作和开关
在工具屏幕上,你会发现许多实用的工具,帮助你开始编辑盔甲架!
左下角有几个快速设置操作,其中许多实际上来自 Vanilla Tweaks 中的书!你最常使用的可能是“角色”,它将盔甲架设置为一系列预设,有助于在你的世界中创建角色。
右侧是一个开关列表。大多数都是一目了然的,但如果你不确定它们的作用,请随意尝试一下!

移动 — 精确定位盔甲架
在移动页面,你会发现可以轻松地在世界中定位盔甲架的工具。
左上角有两个类似于 F3 菜单的文本块。这些文本提供了你自己和你正在编辑的盔甲架的当前位置,以精确坐标和方块位置显示。
左下角有几个快速操作。它们都有工具提示,帮助你了解它们的功能。
右侧是一大片按钮。底部是你看到按指定数量和左侧标注的方向移动盔甲架的按钮。紧挨着这些按钮上方有一个有用的标签,显示你当前面对的方向以供参考。再往上两个按钮允许你更改盔甲架移动的参数。

旋转 — 让盔甲架朝向你想要的方向
在旋转页面,你会发现可以轻松旋转盔甲架到你想要的朝向的工具。
与移动页面类似,左侧有有用的文本块和快速操作按钮,右侧有微调方向的按钮,还有一个滑块可以快速大幅移动!

姿势 — 各身体部位的旋转和缩放
在姿势页面,你会发现调整盔甲架姿势所需的一切,完全按照你的意愿。
左侧有几个按钮来选择你想要编辑的身体部位,底部有一个镜像当前姿势的按钮。
右侧,当前身体部位被显示出来,其下方有一个按钮,可以改变下面滑块的灵敏度/范围。再下面是三个滑块,用于每个身体部分独立的旋转,以及一些按钮,让你能够 精确 调整数值。
从 2.0.0 版本开始,还有一个缩放滑块!用它来调整盔甲架的大小。

预设 — 来自原版、基岩版和 Vanilla Tweaks 的姿势
在预设页面,你会发现所有随模组预配置的姿势列表!
每个姿势都有一个来源(Java 原版、基岩版、Vanilla Tweaks 和一些我自己自定义的),以及一个类别(站立、坐姿等)。你可以使用顶部的两个按钮过滤预设列表。
你可以使用屏幕底部的箭头按钮或在鼠标悬停在预设列表的任何位置时使用鼠标滚轮来浏览预设页面。

物品栏 — 武装你的盔甲架
在物品栏页面,你会看到一个非常熟悉的界面,你可以快速武装你的盔甲架!
除了物品栏管理外,右下角还包括了来自工具页面的两个与物品栏相关的开关,以便快速访问。

人体模型
在人体模型页面,你可以将盔甲架变成一个可摆姿势的角色,穿着真实玩家的皮肤!
假人模式对每个支架单独启用,默认关闭,因此在你开启之前,你的支架不会消耗任何资源——对于未启用的支架,永远不会查询皮肤。要开始使用,请先给支架起一个与 Minecraft 玩家名称匹配的名字(例如使用命名牌),然后打开“假人”开关。支架将渲染为该玩家的模型,包括其皮肤、你为其装备的任何盔甲、手持的物品或头戴的物品,以及玩家的披风。细微的闲置动画使其栩栩如生,同时支架仍遵循你设置的所有其他属性——姿势、缩放比例和“小型化”选项均会保留。

所有假人开关详解
主“假人”开关位于左侧,上方是对应玩家的实时面部预览和状态行。状态行在皮肤加载完成后显示“当前配置:”及玩家名称,或者显示一些帮助文本,提醒你以真实玩家的名字命名支架并启用假人功能。如果名称不匹配真实账号(或皮肤仍在下载中),支架将回退到普通的盔甲支架模型。当配置匹配成功后,预览下方会出现“刷新皮肤”按钮,你可以立即重新获取该玩家的最新皮肤。
右侧是其余的开关。“Animations”(动画)控制闲置动作,接下来的几个开关允许你单独显示或隐藏皮肤的各个部分——披风、帽子、夹克、左袖、右袖、左裤腿、右裤腿——以及“细手臂”,用于强制使用更细的手臂模型(Alex 风格)。还有一个“自动刷新皮肤”开关:默认关闭(支架保留首次加载的皮肤),但开启后,该支架每 15 分钟重新获取玩家的皮肤以保持同步,且过程中无可见中断——在新皮肤加载完成前,它始终显示当前皮肤。

更喜欢全局控制假人?配置文件可以帮你实现:客户端可以完全禁用假人渲染或其动画,或关闭所有自动皮肤刷新;服务器也可以禁用整个功能。详见 Configuration。
与模组中的其他功能一样,假人设置完全由编辑器支持:每项更改都支持撤销/重做和复制/粘贴,并与所有玩家共享,且随世界一起保存。与模组的其余部分一样,它适用于 Fabric、NeoForge 和 Forge。
注意: 假人渲染通过模组专用的网络通道由服务器驱动,故意与原版盔甲支架数据分离,以便没有安装模组的玩家仍能加入服务器(他们只会看到普通的盔甲支架)。由此带来两点影响:
- 服务器必须安装此模组。 如果仅客户端安装了模组而连接到一个未安装模组的服务器,支架不会渲染为假人——它们将显示为普通盔甲支架。假人设置存储在服务器上,并由服务器发送给客户端。
- 回放模组无法显示假人。 由于假人数据通过模组专用通道传输,而非原版实体数据,因此用于回放录制会话的工具(如 Replay Mod)无法重建这些数据,所以在回放中支架将渲染为普通盔甲支架。
配置
本模组附带配置支持。根据环境不同,配置文件可能位于两个位置之一。
单人游戏 / 客户端 — config/armorstands.toml
有一个针对你客户端的全局配置文件,适用于你所有的单人游戏世界。该文件位于 <minecraft directory>/config/armorstands.toml。如果你安装了 Mod Menu,也可以通过配置界面进行修改!
requireSneakingToEdit: true|false - 是否只需右键点击(false)即可打开编辑 GUI,还是需要潜行 + 右键点击(true)。
nameRenderDistance: <Integer> - 盔甲支架名称可见的距离范围。设置为 0 则回退到默认值。
directOnlyNameRender: true|false - 仅在瞄准时渲染盔甲支架名称。请注意,在 Minecraft 中,“瞄准”实体仅在你的“实体交互范围”内有效,默认范围为 3 格。这可以通过效果或模组进行更改。
disableAutoSkinRefresh: true|false - 全局关闭假人皮肤的周期性自动刷新。这将覆盖每个支架的“自动刷新皮肤”开关,因此没有任何假人会自动重新获取皮肤;手动“刷新皮肤”按钮仍然有效。
disableMannequins: true|false - 在客户端完全禁用假人渲染。无论假人设置如何,所有盔甲支架都将渲染为普通模型,且永远不会查询皮肤。
disableMannequinAnimations: true|false - 在客户端关闭假人闲置动画,无论每个支架的“Animations”开关设置如何。
专用服务器 — <world>/config/armorstands.toml
服务器的配置文件位于世界目录内,即 <world>/config/armorstands.toml。服务器端有一些额外的配置选项,特别是用于控制谁可以使用此模组。如果你以前在 server.properties 文件或 armorstandusers.json 中使用过 enforce-armor-stand-permissions 设置,现在配置文件中也有等效项,并且模组会在首次启动时自动为你迁移内容!
requireSneakingToEdit: true|false - 服务器的玩家是只需右键点击(false)还是潜行 + 右键点击(true)来打开编辑 GUI。
enforcePermissions: true|false - 模组是否对所有人开放使用(false)还是受限(true)。这是先前模组版本中 server.properties 里旧属性 enforce-armor-stand-permissions 的配置对应项。
opsHavePermissions: true|false - OP(管理员)是否自动拥有使用该模组的权限。仅在 enforcePermissions 为 true 时生效。
allowedUsers: [UUID] - 被允许使用该模组的玩家 UUID 列表。仅在 enforcePermissions 为 true 时生效。也可以通过游戏内的 /armorstands add <player> 和 /armorstands remove <player> 命令进行修改。
allowAnyItemInHeadSlot: true|false - 允许在盔甲架的头槽放置任何物品,而不仅仅是头盔。
enableMannequins: true|false - 服务器上是否启用人体模型功能。当为 false 时,该功能将在整个服务器范围内关闭:人体模型设置无法更改且不会发送给客户端,因此没有任何盔甲架会渲染为人形模特。
兼容性
Dark UI
如果您使用了深色 UI 模组或资源包(例如来自 Vanilla Tweaks 的那个),可以通过包含的内置资源包与本模组实现完全兼容。在游戏内的资源包列表中,您会看到来自 Armor Stands 模组的 Dark UI 条目!启用它即可让库存界面匹配深色 UI 的颜色。

Stylish Effects 模组
如果您使用了 Stylish Effects 模组,可以在 stylisheffects-client.toml 配置文件的 rederers -> renderers.inventory_renderer -> menu_blacklist 列表中添加 "armorstands:*" 这一项。这将排除所有盔甲架界面显示状态小部件。
回放模组
回放模组(如 Replay Mod)不会以人体模型模式显示盔甲架——它们在回放中会渲染为普通盔甲架。人体模型状态通过模组自己的网络通道传输,而不是原版实体数据(保持独立以便未安装该模组的玩家仍能加入运行该模组的服务器),而回放录制文件并不会重建该通道。关于此模组的其他所有内容均位于客户端或世界端,不受影响。
链接
也在 CurseForge · GitHub 源代码 · 报告问题

Place, pose, and dress armor stands with an easy-to-use UI. Simply right click armor stands to edit them!
On servers, players either need OP permissions or need to be explicitly added with the command /armorstands add playername.

Helpful tips
- When the armor stands UI is open, you can still move around! Use your normal keys to move and jump, and if you want to unlock your camera, simply hold the ALT key!
- The mod comes with clipboard and undo/redo systems. Typical keyboard shortcuts apply, or use the buttons at the top left.
- In case you're working with a bunch of stands at the same time, you can highlight the current one! The mod includes a keybinding (you'll need to assign it a key!) to highlight the stand while the UI is open.
- If a stand is inside a block with gravity turned on, it will fall through! This is a vanilla mechanic and in some cases the stand can fall all the way down through bedrock.
- The undo/redo function is especially helpful for testing out the features! Try hitting a button to see what it does, then simply undo it to try something else!
- You can navigate between screens by clicking the buttons at the top right or using 1-6 on your keyboard.
Screens
Utilities — quick-setup actions and toggles
On the utilities screen, you'll find a lot of helpful tools to get you started with editing armor stands!
On the bottom left there are several quick-setup actions, many of which actually come from the book in Vanilla Tweaks! The one you'll likely use most often is "Character", which sets up the armor stand with a set of presets useful for creating characters around your world.
On the right is a list of toggles. Most of them are self-explanatory, but play around with them if you're not sure what they do!

Move — position the stand precisely
On the move page, you'll find tools to easily position your armor stand around your world.
At the top left there are two helpful blocks of text that resemble the F3 menu. These give the current position of both yourself and the stand you're editing in exact and block positions.
On the bottom left there are several quick actions. They all have tooltips to help you figure out what they can do.
On the right is a large wall of buttons. At the bottom, you'll see buttons for moving the armor stand by the specified amount and in the direction labelled on the left. Just above those is a helpful label showing which direction you are currently facing for reference. Above that are two buttons that let you change the parameters for how the stand will be moved.

Rotate — aim the stand where you want it
On the rotate page, you'll find tools to easily rotate your armor stand the direction you want it to face.
Similar to the move page, the left side features helpful text blocks and quick action buttons, and the right side has buttons to nudge the direction, plus a slider to quickly move it large amounts!

Pose — per-body-part rotation and scale
On the pose page, you'll find everything you'll need to tweak the armor stand's pose exactly how you want it.
On the left are several buttons to select the body part you wish to edit, and a button at the bottom to mirror the currently set up pose.
On the right, the current body part is displayed, and underneath it is a button that will change the sensitivity/range of the sliders below. Beneath that are the three sliders for the independent rotations that each body part can have, with a few buttons for each for getting the numbers just right.
As of version 2.0.0, there is also a scale slider! Use this to adjust the size of your armor stand.

Presets — poses from Vanilla, Bedrock, and Vanilla Tweaks
On the presets page, you'll find a list of all the pre-configured poses that come with the mod!
Each pose has a source (Vanilla (Java), Bedrock, Vanilla Tweaks, and some of my own custom ones), as well as a category (standing, sitting, etc). You can filter the list of presets using the two buttons at the top.
You can scroll through the pages of presets using the arrow buttons at the bottom of the screen or by using your mouse's scroll wheel while hovering over anywhere on the presets list.

Inventory — arm your stand
On the inventory page, you'll see a very familiar UI, where you can quickly arm your stand!
In addition to the inventory management, the bottom right includes two of the toggles from the utilities page relevant to the inventory for quick access.

Mannequin
On the mannequin page, you can turn your armor stand into a posable character that wears a real player's skin!
Mannequin mode is opt-in per stand and turned off by default, so your stands cost nothing until you enable it — no skin is ever looked up for a stand you haven't switched on. To get started, give the stand a custom name that matches a Minecraft player (for example with a name tag), then flip on the "Mannequin" toggle. The stand will render as that player's character, complete with their skin, any armor you've equipped, items held in its hands or worn on its head, and the player's cape. A subtle idle animation brings it to life, and the stand still follows everything else you've set up — its pose, scale, and the "small" option all carry over.

Every mannequin toggle, explained
The main "Mannequin" toggle sits on the left, above a live face preview of the matched player and a status line. The status line either reads "Current profile:" with the player's name once the skin has loaded, or some help text reminding you to name the stand after a real player and to enable Mannequin. If the name doesn't match a real account (or the skin is still downloading), the stand simply falls back to the normal armor stand model. When a profile is matched, a "Refresh skin" button appears beneath the preview so you can immediately re-fetch that player's current skin.
On the right are the rest of the toggles. "Animations" controls the idle motion, and the next several let you show or hide each part of the skin individually — Cape, Hat, Jacket, Left and Right Sleeve, Left and Right Pants — plus "Slim arms" to force the slimmer (Alex-style) arm model. There's also an "Auto-refresh skin" toggle: it's off by default (the stand keeps the skin it first loaded), but turn it on and that stand re-fetches the player's skin every 15 minutes to keep up with skin changes, with no visible interruption — it keeps showing the current skin until the new one finishes loading.

Prefer to control mannequins globally? The config files have you covered: clients can disable mannequin rendering or its animations entirely, or turn off all automatic skin refreshing, and servers can disable the whole feature. See Configuration for details.
Like everything else in the mod, the mannequin settings are fully editor-backed: every change supports undo/redo and copy/paste, is shared with all players, and is saved with the world. And just like the rest of the mod, it works across Fabric, NeoForge, and Forge.
Note: Mannequin rendering is driven by the server over the mod's own network channel, kept deliberately separate from vanilla armor-stand data so that players without the mod can still join the server (and simply see ordinary armor stands). Two things follow from that:
- The mod must be installed on the server. Connecting to a server that doesn't have the mod with only a client-side install won't make stands render as mannequins — they'll appear as ordinary armor stands. The mannequin settings live on the server and are sent to clients from there.
- Replay mods won't show mannequins. Because the mannequin data travels over the mod's channel rather than vanilla entity data, tools that play back recorded sessions (such as Replay Mod) don't reconstruct it, so stands render as plain armor stands in replays.
Configuration
The mod ships with configuration support. There are two potential locations for config files, depending on the environment.
Single player / client side — config/armorstands.toml
There is a "global" config file for your client that applies to all your single player worlds. This will be found in <minecraft directory>/config/armorstands.toml. You can also modify it through the config screen if you have Mod Menu installed!
requireSneakingToEdit: true|false - Whether you open the edit GUI through just right click (false) or sneak + right click (true).
nameRenderDistance: <Integer> - How far away armor stand names should be visible. Set to 0 to fall back to default.
directOnlyNameRender: true|false - Only render armor stand names when targeting them. Note that "targeting" an entity in Minecraft only works within your "entity interaction range", which is 3 blocks by default. This can be changed by effects/mods.
disableAutoSkinRefresh: true|false - Globally turn off the periodic auto-refresh of mannequin skins. Overrides each stand's "Auto-refresh skin" toggle, so no mannequin re-fetches its skin automatically; the manual "Refresh skin" button still works.
disableMannequins: true|false - Disable mannequin rendering entirely on your client. Every armor stand renders as the normal model regardless of its mannequin settings, and no skins are ever looked up.
disableMannequinAnimations: true|false - Turn off the mannequin idle animation on your client, regardless of each stand's "Animations" toggle.
Dedicated server — <world>/config/armorstands.toml
The server's configuration file will be located inside the world's directory, i.e. <world>/config/armorstands.toml. There are a few more configuration options for server side, particularly for controlling who has access to use the mod. If you previously used the enforce-armor-stand-permissions setting in the server.properties file or the armorstandusers.json, there are equivalents in the config file now, and the mod will automatically migrate the contents for you on first start!
requireSneakingToEdit: true|false - Whether your server's players open the edit GUI through just right click (false) or sneak + right click (true).
enforcePermissions: true|false - Whether the mod is open to everyone to use (false) or restricted (true). The config equivalent of the old enforce-armor-stand-permissions property in the server.properties for previous mod versions.
opsHavePermissions: true|false - Whether OPs automatically have permissions to use the mod. Only has any effect if enforcePermissions is true.
allowedUsers: [UUID] - List of players by their UUID permitted to use the mod. Only has any effect if enforcePermissions is true. Can also be modified from inside the game with the /armorstands add <player> and /armorstands remove <player>.
allowAnyItemInHeadSlot: true|false - Allow placing any item in an armor stand's head slot, not just helmets.
enableMannequins: true|false - Whether the mannequin feature is available on the server. When false, the feature is turned off server-wide: mannequin settings can't be changed and aren't sent to clients, so no stand renders as a mannequin.
Compatibility
Dark UI
Those of you who use a dark UI mod or resource pack (i.e. the one from Vanilla Tweaks) can get full compatibility with this mod through the included built-in resource pack. If you go to the resource packs list in-game, you'll see an entry from the Armor Stands mod for Dark UI! Enable this to get the inventory screen to match the dark UI colors.

Stylish Effects mod
If you use the Stylish Effects mod, you can add an entry to the rederers -> renderers.inventory_renderer -> menu_blacklist list in your stylisheffects-client.toml config file with the text "armorstands:*". This will exclude all of the armor stands screens from showing the status widgets.
Replay mods
Replay mods (such as Replay Mod) won't show armor stands in mannequin mode — they render as ordinary armor stands in the replay. The mannequin state travels over the mod's own network channel rather than vanilla entity data (kept separate so players without the mod can still join a server running it), and replay recordings don't reconstruct that channel. Everything else about the mod is client- or world-side and is unaffected.
Links
Also on CurseForge · Source on GitHub · Report an issue
下载 Armor Stands
下载 Armor Stands
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Armor Stands
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Armor Stands
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Armor Stands
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Armor Stands
下载 Armor Stands
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Armor Stands
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Armor Stands
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Armor Stands
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
- 更新至 26.3
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
模组
可定制的鞘翅模组,支持装饰纹饰、旗帜图案等更多功能!
模组
显示你正在注视的方块的信息。(适用于 Minecraft 1.16+ 的 Hwyla/Waila 分支)
模组
在游戏画面角落显示附近世界地形、玩家、生物和实体的地图。可创建路径点,帮助你找到标记过的位置。
模组
使用 JavaScript 编辑配方、添加自定义物品、编写世界事件!
模组
查看物品与配方
模组
AE2:一款流行的自动化与存储模组
评论 0
登录后参与评分
还没有评论,来抢沙发吧