客户端工具

支持 Minecraft 1.21~1.21.8
在 Modrinth 下载 | 在 CurseForge 下载
客户端自动化工具集 / A collection of client-side automation tools.
带有高亮叠加层的清扫路径预览
带落点标记的箭矢轨迹预测
带有输入/输出容器的合成台高亮
通过 /cdoll 将芙宁娜人偶 3D 模型应用于物品
下载
简介
Client Tools 是适用于 Minecraft 1.21 的 Fabric 客户端模组。它提供了 13 个客户端命令(功能上分为 12 个模块):
/ccraft — 自动化合成链执行,支持多源材料扫描与最优合成计划生成
/ctimer — 定时命令调度器,支持按配置的时间间隔和次数重复执行命令
/cchat — 快捷聊天消息发送
/cfly — 飞行开关,支持起跳和状态查看
/csweep — 蛇形扫掠区域遍历,搭配投影打印机实现区域清空
/csequence — mcfunction 序列编辑器与执行器,支持外部编辑器、嵌套调用和循环
/cbuy / /csell — 商店自动化买卖,操作容器界面商店
/clitematica — Litematica 选区工具:沿轴移动投影,或使选区实时跟随玩家移动
/cbow — 实时箭矢轨迹预测,显示抛物线、落点标记,支持多重射击、实体命中检测和自动瞄准
/criptide — 覆盖激流三叉戟的水/雨限制,在沙漠、洞穴、屋檐下等任意位置均可飞行
/cdoll — 动态将 Furina 娃娃 3D 模型应用到任意物品,内置资源包自动启用
/cencrypt — AES-256-GCM 加密私聊,通过 /msg 发送加密消息,支持送达确认、群发、玩家专属密钥和命令别名
所有功能均完全在客户端运行,无需服务端安装。
特性
/ccraft — 自动合成
- 自动检测你所注视方块处的合成台以及输入/输出容器
- 智能多源材料扫描 — 检测输入箱子中的可用材料并构建最优合成计划
- 完整的合成链分析 — 自动处理中间合成步骤(例如:木板 → 木棍 → 工具)
- 旧版源模式 — 使用
/ccraft source <item> 指定源物品以进行固定链式合成
- 可配置的合成数量,支持无限模式(直到材料耗尽或输出容器已满为止)
- 单项清除 — 单独清除源物品、产物、合成台、输入、输出或数量,而无需重置所有内容
- 多合成台管理 — 保存、加载、列出和删除命名过的合成台配置;查找最近的已保存合成台
- 增强型方块高亮 (
/ccraft show) — 可自定义持续时间和每个位置的颜色,支持命名颜色(红、绿、蓝...)和十六进制值的 Tab 补全;默认颜色:合成台绿色,输入蓝色,输出金色
- 实时状态提示 — 运行时显示停止命令,就绪时显示运行命令
/ccraft help [subcommand] — 各个子命令的详细帮助信息
- 容器超时与重试处理
- 执行过程中的实时进度追踪
/ctimer — 定时命令调度器
- 以可配置的时间间隔重复执行任何命令
- 支持人类可读的时间格式:
1s、5m、1h、500ms、20t(刻)
- 可配置重复次数或无限循环
- 列出、通过模式匹配停止或停止所有计时器
- 多个独立计时器可同时运行
/ctimer help [subcommand] — start、stop、stop-all、list 的详细帮助信息
/cfly — 飞行开关
- 使用单个命令开启/关闭飞行
enable / disable — 显式设置飞行状态
jump — 切换自动跳跃模式(启用飞行时自动跳跃)
jump enable / jump disable — 显式设置自动跳跃
status — 检查飞行权限、激活状态、游戏模式和自动跳跃设置
/cfly help [subcommand] — 获取各个子命令的详细帮助
- 自动将能力同步到服务器
- 自动跳跃设置在
config/client-tools/global.json 中持久保存(与 /cbow 和 /criptide 的切换状态一起)
/csweep — 蛇形区域遍历
- 使用两个角位置(
pos1 / pos2)选择一个长方体区域
- Litematica 集成 — 自动从 Litematica 原理图子区域同步扫描区域(默认启用);按顺序跨多个区域扫描
- 基于半径配置站点间距的蛇形路径生成
- 连续平滑移动 — 在站点之间以恒定速度进行线性插值,无停顿
- 双模式 —
mining 模式用于清除方块,drain 模式用于液体扫描
- maxspeed — 为自适应自动速度模式设置上限速度
- autospeed — 根据方块密度自适应调整速度,在
speed 和 maxspeed 之间变化
- avoidwater — 在遍历过程中自动调整 Y 轴高度以保持在水面之上
- blockdetect — 后半球方块阻挡检测,具有两种响应模式:
wait(停止并等待)或 slow(将速度降低至 20%)
- 动态长方体调整 — 根据你的视角方向扩大或缩小长方体边界
- 不锁定相机 — 仅使用位置数据包,你保持完整的视角控制
- 独立的显示开关:绿色轮廓线框、青色路径预览(已访问段为灰色)
- Y 轴层级强调和最近站点方向箭头默认启用
- 暂停与恢复且完全持久化 — 进度在游戏重启后保留,暂停作为切换开关
- 断开连接时自动保存 — 当你断开连接时,扫描进度会自动保存,并提示重新连接
- 平滑接近 — 当从远离路径的位置恢复时,平滑飞向目标而不是瞬间传送
- 实时最近站点跟踪 —
/csweep nearest 切换实时跟踪;随着你的移动更新最近站点,路径方向箭头显示扫描方向
- Y 轴层级强调 —
/csweep show layer 用多偏移粗线高亮当前 Y 轴层路径,淡化其他 Y 轴层(运行时跟随扫描 Y 轴,空闲时跟随玩家 Y 轴)
- 多区域层级强调 — 加粗当前子区域的轮廓,淡化非活动区域以提高清晰度
- 子区域跳过 — 使用
/csweep next 跳转到下一个 Litematica 子区域
- 实时速度调整 — 在操作过程中改变飞行速度
- 状态显示中包含预计到达时间 (ETA) 的进度条
- 防惩罚地板 (
/csweep antiground) — 站点下方的客户端幽灵方块路径消除了浮空挖掘惩罚;下降时自动切换飞行以实现平滑的层级过渡;可配置方块类型(默认:红石矿石)
/csweep penalty — 调试命令,显示完整的移动惩罚状态(飞行、地面、水、蛛网、卡住、阻挡、速度)
/csweep help [subcommand] — 带 Tab 补全的所有子命令详细帮助
/cchat — 快速聊天发送器
- 直接从命令行发送聊天消息
- 适用于自动化脚本和快速通信
/cchat help — 显示帮助信息
/csequence — mcfunction 序列执行器
- 创建和管理
.mcfunction 文件,支持点击复制文件路径以便外部编辑
- 按顺序执行命令,每行之间可配置延迟
- 支持嵌套序列 — 一个序列可以调用另一个,后者又可以调用另一个(最多支持 10 层深度)
- 循环检测 — 防止无限递归(A→B→A 会被自动阻止)
- 循环模式用于重复执行序列
- 所有序列文件存储在
config/client-tools/sequences/ 中
/csequence help [subcommand] — 获取各个子命令的详细帮助
/cbuy / /csell — 商店自动化
- 通过基于容器的商店 GUI 自动化购买和销售物品
- 支持中文物品名称和 Minecraft 物品 ID
- 默认数量为
all(最大可能数量),也可指定具体数字
- 在合成或其他商店操作运行时被屏蔽
- 支持物品名称的 Tab 补全(中文和英文/Minecraft ID)
/cbuy help / /csell help — 显示帮助信息
/clitematica — Litematica 选择工具
shift x <amount> / y <amount> / z <amount> — 沿单独坐标轴移动 Litematica 选择区域
shift status — 显示当前选择信息,包括区域数量和坐标
follow start — 开始实时跟随:记录玩家相对于选择的偏移量,并随玩家移动而移动选择区域
follow stop — 停止跟随;选择区域保持在当前位置
follow status — 显示当前跟随状态:偏移量、参考位置、轴锁定情况
follow axis <x|y|z> <lock|unlock> — 锁定或解锁单个坐标轴以限制选择区域的移动(例如,锁定 Y+Z 仅在 X 轴上移动)
/clitematica help [subcommand] — 获取 shift 和 follow 的详细帮助
- 需要安装 Litematica
/cbow — 箭矢轨迹预测与自动瞄准
- 拉弓或手持已装填弩时实时显示抛物线轨迹
- 干净的虚线轨迹,颜色可配置
- 多重射击支持 — 为弩和自定义服务器弓显示以 ±10° 张开的 3 条轨迹
- 实体命中检测 — 当箭矢会击中活体实体时,轨迹和标记变为绿色
- 自动瞄准锁定(
/cbow target) — 将弓的瞄准锁定到特定实体,或启用自动获取模式
auto 模式:从玩家眼睛沿视线方向进行射线投射,锁定命中的第一个实体
- 手动模式:通过名称瞄准特定玩家,或通过选择器瞄准实体(
@e[distance=..50,limit=1])
- 模组实时控制玩家的偏航角/俯仰角,考虑重力和阻力进行调整,确保箭矢穿过目标
- 锁定在松开弓之前持续有效;目标设置在拉开/松开循环之间保持
- 与表面贴合的着陆标记 — 标记垂直于命中表面定向(地面水平,墙壁垂直)
- 带准星、圆环和信标线的 3D 着陆标记,高可见度
- 着陆点的距离标签
- 简单的切换命令,状态显示包含武器信息、充能百分比和附魔
- 切换状态跨游戏重启保存在
config/client-tools/global.json 中
/criptide — 激流三叉戟飞行覆盖
- 覆盖
isInWaterOrRain() 检查,使激流三叉戟在任何生物群系或位置都能生效
- 适用于沙漠、洞穴、屋顶下——任何没有水源或雨水的地方
- 使用原版
TridentItem 代码路径,提供真实的激流速度和旋转动画
- 简单的切换命令,状态显示当前手持的三叉戟和激流附魔等级
/criptide help [subcommand] — 提供 on、off、status 的详细帮助
- 切换状态跨游戏重启保存在
config/client-tools/global.json 中
Furina Doll 资源包及 /cdoll — 动态物品外观覆盖
- 内置资源包 — 包含一个 3D 芙宁娜人偶模型(template_doll),用于替换盔甲架、不死图腾和指南针的外观;安装模组时自动启用
- 动态物品覆盖 —
/cdoll add <item> 将人偶 3D 模型应用于任何物品,使用原物品的纹理作为卡片正面
- 全局持久化保存到
config/client-tools/dolls.json;模型文件自动生成到 resourcepacks/client-tools-dolls/
- 自动生成功能会根据当前 Minecraft 版本生成具有正确包格式的资源包
/cdoll remove <item> — 注销物品
/cdoll list — 显示所有已应用人偶模型的物品
/cdoll clear — 移除所有分配
/cdoll help [subcommand] — 带有 Tab 补全的详细帮助
- 人偶模型系统采用父子架构:
template_doll 定义 3D 几何结构,子模型只需指定 parent 和 layer0 纹理
ModMenu 与 Cloth Config 配置界面 / ModMenu & Cloth Config GUI
本模组集成 ModMenu,安装后可获得图形化配置界面,无需手动编辑 JSON。
使用方法
- 安装 ModMenu 和 Cloth Config(均为可选依赖)
- 打开「模组」界面
- 找到 Client Tools
- 点击齿轮按钮 ⚙️,打开配置界面
配置分类
| 分类 |
设置项 |
| Flight |
飞行开关、自动起跳 |
| Craft |
合成产品(product)、合成原料(source)、工位/输入/输出容器位置、重复合成数量 |
| Sweep |
扫掠半径、移动速度、自适应速度(autospeed)、速度上限(maxspeed)、避水(avoidwater)、方块检测(blockdetect)、Litematica 同步 |
| Display |
描边线框(outline)、路径预览(path)、层级强调(layer)、方向箭头(dir) |
| Timer |
当前活跃的定时器列表 |
| Status |
当前扫掠进度、合成运行状态 |
所有修改实时生效,关闭界面时自动保存。
Usage
- Install ModMenu and Cloth Config (both optional)
- Open the Mods screen
- Find Client Tools
- Click the gear icon ⚙️ to open the config GUI
Categories: Flight, Craft, Sweep, Display, Timer, Status. All changes take effect immediately.
配置文件参考 / Configuration Files
所有配置文件均位于 config/client-tools/ 目录下。无需手动编辑 —— 绝大多数设置可通过命令或 ModMenu 图形界面修改。
| 文件 |
关联命令 |
用途 |
global.json |
/cfly, /cbow, /criptide, /cencrypt |
全局持久化设置 |
sequences/ |
/csequence |
mcfunction 序列文件(.mcfunction) |
dolls.json |
/cdoll |
物品-娃娃模型映射列表 |
sweep/<world-id>.json |
/csweep |
扫掠暂停进度(按世界分别保存) |
global.json
跨会话持久化的全局设置:
{
"autoJump": false,
"cbowEnabled": false,
"criptideEnabled": false,
"p2pPlayerPasswords": {},
"p2pAlias": "em"
}
| 字段 |
对应命令 |
说明 |
autoJump |
/cfly jump |
飞行时自动起跳 |
cbowEnabled |
/cbow |
箭矢轨迹预测开关状态 |
criptideEnabled |
/criptide |
激流三叉戟覆盖开关状态 |
p2pPlayerPasswords |
/cencrypt set |
玩家专属密钥映射(玩家名 → 密码) |
p2pAlias |
/cencrypt alias |
/cencrypt msg 的快捷别名(默认 em) |
每次通过命令修改这些设置时,global.json 会自动更新。重启游戏后设置保持不变。
How to Use
Prerequisites
- Install Fabric Loader and Fabric API
- Place the built
client-tools-x.y.z.jar into your mods/ directory
- Launch the game
/ccraft Quick Start
--- Help ---
/ccraft — Show brief help
/ccraft help — Show full help
/ccraft help <subcommand> — Show detailed help for a subcommand
--- Basic setup ---
/ccraft product minecraft:diamond_pickaxe — Set the item you want to craft
/ccraft input — Set input chest (look at it)
/ccraft output — Set output chest (look at it)
/ccraft station — Set crafting table (look at it, or auto-detected)
--- Legacy source mode (fixed chain) ---
/ccraft source minecraft:diamond — Set the source material to craft from
--- Target count ---
/ccraft count 64 — Craft 64 products
/ccraft count infinite — Craft until materials run out or output is full
--- 控制 ---
/ccraft run — 开始合成!
/ccraft stop — 停止正在运行的合成
/ccraft status — 检查运行进度和配置
--- 方块高亮 ---
/ccraft show — 高亮显示位置 3 秒(默认颜色:基座绿色,输入蓝色,输出金色)
/ccraft show 10s — 高亮显示 10 秒
/ccraft show 5s red blue gold — 5 秒,自定义颜色(基座/输入/输出)
/ccraft show 30s FF5555 55FF55 FFAA00 — 30 秒,十六进制颜色
/ccraft show 1m green cyan magenta — 1 分钟,使用命名颜色
--- 多基座管理 ---
/ccraft save myfarm — 将当前基座配置保存为 "myfarm"
/ccraft load myfarm — 加载已保存的基座配置 "myfarm"
/ccraft list — 列出所有已保存的基座配置
/ccraft delete myfarm — 删除已保存的配置 "myfarm"
/ccraft nearest — 查找并加载最近的已保存基座
--- 清除设置 ---
/ccraft source clear — 仅清除源物品
/ccraft product clear — 仅清除产物物品
/ccraft station clear — 仅清除基座位置
/ccraft input clear — 仅清除输入框位置
/ccraft output clear — 仅清除输出框位置
/ccraft count clear — 重置数量至默认值 (1)
/ccraft clear — 一次性清除所有设置
持续时间格式: 3s(秒)、10t(刻)、1m(分钟)、500ms(毫秒)
颜色格式: 命名颜色(red, green, blue, gold, yellow, cyan, magenta, white, orange, purple, pink, lime, aqua, navy, teal, brown, gray, grey, black)或十六进制颜色(FF5555, #FF5555, 0xFF5555)
在 show 命令中使用 Tab 键可自动补全持续时间和颜色。
/ctimer 快速入门
--- 帮助 ---
/ctimer — 显示简要帮助
/ctimer help — 显示完整帮助
/ctimer help <subcommand> — 显示子命令的详细帮助
--- 启动计时器 ---
/ctimer start infinite interval 5s /say Hello — 每 5 秒发送一次 "/say Hello",无限循环
/ctimer start 10 interval 30s /tp ~ ~10 ~ — 每 30 秒传送一次,共执行 10 次
/ctimer start 5 interval 1m /weather clear — 每分钟执行一次 "/weather clear",共执行 5 次
--- 管理计时器 ---
/ctimer list — 列出所有活动的计时器
/ctimer stop Hello — 停止命令匹配 "Hello" 的计时器
/ctimer stop-all — 停止所有计时器
语法: /ctimer start <count|infinite> interval <duration> <command>
持续时间格式: 1s, 5m, 1h, 500ms, 20t(刻),纯数字 = 刻
/cfly 快速入门
--- 帮助 ---
/cfly — 切换飞行开启/关闭
/cfly help — 显示完整帮助
/cfly help <subcommand> — 显示子命令的详细帮助
--- 飞行控制 ---
/cfly enable — 启用飞行
/cfly disable — 禁用飞行
--- 自动跳跃 ---
/cfly jump — 切换自动跳跃模式
/cfly jump enable — 启用自动跳跃(当启用飞行时自动跳跃)
/cfly jump disable — 禁用自动跳跃
--- 状态 ---
/cfly status — 检查飞行状态、游戏模式和自动跳跃设置
/csweep 快速入门
--- 帮助 ---
/csweep — 显示简要帮助
/csweep help — 显示完整帮助
/csweep help <subcommand> — 显示子命令的详细帮助
--- 设置 ---
/csweep pos1 — 设置第一个角(注视方块或使用玩家位置)
/csweep pos1 100 64 200 — 手动设置第一个角
/csweep pos2 — 设置对角
/csweep radius 5 — 设置基座间距半径(默认 4,范围 1–64)
/csweep speed 15 — 设置飞行速度(单位:方块/秒,默认 10,范围 0.5–100)
--- 自适应速度 ---
/csweep maxspeed — 显示 autospeed 模式下的当前最大速度
/csweep maxspeed 30 — 设置最大速度(默认 20,范围 0.5–100)
/csweep autospeed — 根据方块密度切换自适应速度
/csweep autospeed on/off — 显式启用/禁用自适应速度
--- 检查当前数值 ---
/csweep radius — 显示当前半径
/csweep speed — 显示当前速度
--- 调整长方体 ---
/csweep expand 5 — 沿你注视的面扩展长方体 5 个方块
/csweep contract 3 — 沿你注视的面收缩长方体 3 个方块
--- 高亮显示 ---
/csweep show — 检查当前的高亮设置
/csweep show outline — 切换绿色长方体线框
/csweep show path — 切换青色蛇形路径预览(可在开始之前使用!)
/csweep show layer — 切换 Y 层级强调(加粗当前层级,淡化其他;默认开启)
/csweep show dir — 在最近基座处切换路径方向箭头(默认开启)
--- 模式 ---
/csweep mode — 显示当前模式(MINING 挖掘 或 DRAIN 抽取)
/csweep mode mining — 设置挖掘模式(方块清理)
/csweep mode drain — 设置抽取模式(液体扫描)
--- 水与阻挡 ---
/csweep avoidwater — 切换自动调整 Y 层级以避免进入水中
/csweep avoidwater on/off — 显式启用/禁用
/csweep blockdetect — 切换后方半球阻挡检测
/csweep blockdetect on/off— 显式启用/禁用检测
/csweep blockdetect wait — 检测到阻挡时停止并等待
/csweep blockdetect slow — 检测到阻挡时将速度降低至 20%
--- Litematica 集成 ---
/csweep litematica on — 将扫描区域与 Litematica 结构子区域同步(默认启用)
/csweep litematica off — 使用手动坐标代替
/csweep litematica sync — 强制重新同步至 Litematica 放置区域(刷新区域列表)
/csweep litematica — 显示 Litematica 同步状态及子区域列表
--- 导航 ---
/csweep nearest — 切换实时最近站点追踪(移动时自动更新)
/csweep next — 跳过当前子区域并跳转至下一个
--- 控制 ---
/csweep start — 开始扫描(若存在暂停状态则恢复)
/csweep pause — 在当前站点暂停 / 若已暂停则恢复(切换开关)
/csweep stop — 停止并清除暂停状态
/csweep status — 查看配置、进度及暂停状态
/csweep reset — 清除所有设置
--- 调试 ---
/csweep penalty — 显示移动惩罚状态(飞行、水中、蜘蛛网、卡住、阻挡、速度)
--- 防惩罚地板 ---
/csweep antiground — 显示防惩罚地板设置
/csweep antiground on/off — 启用/禁用幽灵方块地板
/csweep antiground block <id> — 设置地板方块类型(默认:minecraft:redstone_ore)
持久化: 暂停状态(当前站点索引)按世界保存至 config/client-tools/sweep/<world-id>.json。你可以断开连接、重启游戏,然后通过 /csweep start 从断点处继续。如果在扫描过程中断开连接,进度会自动保存,并在重新加入时提醒你。
速度调整: 随时使用 /csweep speed <value> 更改速度——即使正在运行也会立即生效。启用 autospeed 后,实际速度会在 speed 和 maxspeed 之间根据方块密度动态变化。
立方体调整: 设置完成后,可使用 expand(扩展)/contract(收缩)来调整立方体边界。模组会根据你的视角方向决定调整哪个面——注视你想要移动的面并执行命令。支持所有六个面(±X, ±Y, ±Z)。
平滑移动: 扫描不再在每个站点停顿。玩家沿路径以恒定速度连续移动,并在航路点之间进行线性插值——更快且更自然。
Litematica 集成: Litematica 同步默认启用。如果安装了 Litematica 并加载了结构文件,扫描区域会自动同步至该结构的子区域。每个子区域将依次被扫描。设置手动 pos1/pos2 会自动禁用同步。使用 /csweep litematica 查看检测到的区域及其坐标。
防惩罚地板: /csweep antiground on 可在扫描路径下方启用一条幽灵方块带。玩家在水平移动时将站立在这些方块上,从而消除悬浮挖掘的惩罚。在下落垂直距离时会自动开启飞行以避免瞬移循环,到达下一层后再关闭。使用客户端侧生成的幽灵方块(不消耗物品)。使用 /csweep antiground block <id> 配置方块类型(默认:minecraft:redstone_ore)。记得在打印机中将此方块列入黑名单!
扫描中恢复 & 实时追踪: /csweep nearest 可切换实时最近站点追踪。启用后,最近站点会随你移动而更新,路径方向箭头会显示该站点的扫描方向。四处移动以找到最佳起始点,然后输入 /csweep start 从此处开始。执行器会将你平滑地传送至目标站点——非瞬间瞬移。再次输入 /csweep nearest 关闭追踪。如果存在暂停状态,使用 /csweep nearest 会将其清除(因为你选择了新的起始点)。
/cchat 快速入门
/cchat Hello everyone! — 在聊天栏发送 "Hello everyone!"
/cchat help — 显示帮助信息
/csequence 快速入门
--- 帮助 ---
/csequence — 显示简要帮助
/csequence help — 显示完整帮助
/csequence help <subcommand> — 显示特定子命令的详细帮助
--- 编辑 ---
/csequence new daily — 创建一个空的 daily.mcfunction 并显示其文件路径
/csequence edit daily — 显示 daily.mcfunction 文件路径(点击复制;若不存在则创建)
/csequence folder — 显示序列文件夹路径(点击复制)
/csequence list — 列出所有已保存的序列
/csequence delete daily — 删除 daily.mcfunction
--- 执行 ---
/csequence run daily — 运行 daily.mcfunction(1刻延迟,无循环)
/csequence run daily 1s — 以命令间 1 秒延迟运行
/csequence run daily 500ms loop— 以 500 毫秒延迟运行,无限循环
/csequence run farm 5t loop — 以 5 刻延迟运行,循环
--- 控制 ---
/csequence stop — 停止正在运行的序列
/csequence status — 显示当前进度、嵌套深度及调用栈
mcfunction 格式: 标准 Minecraft 函数语法——每行一个命令,# 用于注释,空行会被忽略。
嵌套序列: 在序列文件中使用 /csequence run <name> 可调用另一个序列。父序列会暂停,子序列运行至完成,随后父序列恢复。循环检测可防止无限递归(最大嵌套深度为 10 层)。
文件路径: 文件路径在聊天中以可点击文本形式显示——点击即可复制路径,然后粘贴到文件管理器或编辑器中直接打开文件。此方法通过不启动外部程序来确保符合 CurseForge 规范。
/cbuy / /csell 快速入门
--- 帮助 ---
/cbuy help — 显示帮助信息
/csell help — 显示帮助信息
--- 用法 ---
/cbuy minecraft:sand — 购买沙子(最大数量/全部)
/cbuy sand 64 — 购买 64 个沙子(英文名称)
/cbuy 沙子 64 — 购买 64 个沙子(中文名称)
/csell minecraft:diamond 10 — 出售 10 个钻石
/csell 钻石 all — 出售所有钻石(中文名称)
物品名称: 支持 Minecraft ID(minecraft:sand)、英文名称(sand)和中文名称(沙子)。对英文名称和中文名称均提供 Tab 补全功能。
数量: 默认为 all(最大可能值)。也可以指定具体数值。如果最后一个由空格分隔的标记是 all 或数字,则将其解析为数量。
要求: 必须打开商店 GUI。在合成或其他商店操作运行时将被阻止。
/clitematica 快速入门
--- 帮助 ---
/clitematica help — 显示完整帮助信息
/clitematica help shift — 显示 shift 子命令详情
/clitematica help follow — 显示 follow 子命令详情
--- Shift(沿轴移动选区) ---
/clitematica shift x 5 — 将选区向东移动 5 格(+X)
/clitematica shift x -3 — 将选区向西移动 3 格(-X)
/clitematica shift y 2 — 将选区向上移动 2 格(+Y)
/clitematica shift y -1 — 将选区向下移动 1 格(-Y)
/clitematica shift z 4 — 将选区向南移动 4 格(+Z)
/clitematica shift z -2 — 将选区向北移动 2 格(-Z)
/clitematica shift status — 显示当前选区信息(区域数量、名称、坐标)
--- Follow(选区实时跟随玩家) ---
/clitematica follow start — 开始跟随;记录玩家到选区的偏移量
/clitematica follow stop — 停止跟随;选区保持原位
/clitematica follow status — 显示偏移量、参考位置、轴锁定状态
/clitematica follow axis y lock — 锁定 Y 轴(选区仅在 X 和 Z 上移动)
/clitematica follow axis z lock — 同时锁定 Z 轴(选区仅在 X 上移动)
/clitematica follow axis y unlock — 解锁 Y 轴(恢复垂直方向跟随)
要求: 已安装 Litematica 并加载了蓝图。
/cbow 快速入门
--- 帮助 ---
/cbow — 切换箭矢轨迹预测开关
/cbow help — 显示帮助信息
/cbow help <subcommand> — 显示 on/off/status/target 的详细帮助
--- 控制 ---
/cbow on — 启用轨迹预测
/cbow off — 禁用轨迹预测
/cbow status — 显示当前状态、武器类型、充能百分比、附魔
--- 自动瞄准目标 ---
/cbow target auto — 开启自动瞄准:拉弓时,准星经过实体时将锁定目标
/cbow target <player> — 设置特定玩家为目标(通过名称)
/cbow target @e[distance=..50,limit=1] — 通过实体选择器设置目标
/cbow target @p — 选择最近的玩家作为目标
/cbow target — 显示当前目标状态
/cbow target stop — 取消瞄准
用法: 手持弓并拉开(或手持已装填的弩)。一条虚线金色抛物线会实时显示预测的箭矢路径。落点会用显眼的十字准星标记标记。如果箭矢击中实体,整个轨迹会变绿,并在撞击点出现菱形标记。多重射击弓/弩会显示 3 条轨迹。切换状态保存在 config/client-tools/global.json 中,跨游戏重启持久化。
自动瞄准: 使用 /cbow target auto(拉开时自动获取)或 /cbow target <name/selector> 设置目标。当你拉开弓时,模组会控制你的瞄准——实时调整偏航角/俯仰角,并提供完整的重力和空气阻力补偿。开火后锁定解除;目标配置会保留供你下一发子弹使用。使用 /cbow target stop 清除。
/criptide 快速入门
--- 帮助 ---
/criptide — 切换激流覆盖开关
/criptide help — 显示帮助信息
/criptide help <subcommand> — 显示 on/off/status 的详细帮助
--- 控制 ---
/criptide on — 启用激流覆盖
/criptide off — 禁用激流覆盖
/criptide status — 显示当前状态、手持三叉戟、激流等级
用法: 手持带有激流附魔的三叉戟,使用 /criptide on 启用覆盖,然后右键点击并松开以发射。无论生物群系、天气或天空视野如何均可在任何地方使用。原版游戏代码处理旋转攻击、速度和音效。切换状态保存在 config/client-tools/global.json 中,跨游戏重启持久化。
/cdoll 快速入门
--- 帮助 ---
/cdoll help — 显示完整帮助
/cdoll help <subcommand> — 显示子命令的详细帮助
--- 管理玩偶物品 ---
/cdoll add minecraft:diamond — 将玩偶模型应用到钻石
/cdoll add stick — 将玩偶模型应用到木棍(裸名 = minecraft:stick)
/cdoll remove stick — 移除木棍上的玩偶外观
/cdoll list — 显示所有已应用玩偶的物品
/cdoll clear — 移除所有玩偶分配
Tab 补全: add 会建议所有已注册的物品 ID。remove 仅建议当前在玩偶列表中的物品。
工作原理: 每个应用了玩偶的物品都会在 resourcepacks/client-tools-dolls/ 下生成一个模型 JSON 文件。该文件继承自 minecraft:item/template_doll(由内置的 furina_doll 资源包提供),并将 layer0 设置为原物品的纹理。每次更改后会自动重新加载资源包。
/cencrypt — 加密私聊
--- 帮助 ---
/cencrypt help — 显示完整帮助
/cencrypt help <subcommand> — 显示子命令的详细帮助
--- 密钥设置 ---
/cencrypt set <player> <password> — 设置特定玩家的加密密钥
/cencrypt clear <player> — 清除特定玩家的密钥(恢复为玩家名称)
/cencrypt stop — 清除所有玩家密钥
/cencrypt status — 显示密钥数量和群组信息
--- 消息传递 ---
/cencrypt msg <player> <message> — 向单个玩家发送加密消息(自动补全在线玩家)
/cencrypt group add <player> — 将玩家添加到群组
/cencrypt group remove <player> — 从群组中移除玩家
/cencrypt group list — 显示群组成员
/cencrypt group send <message> — 向所有在线群组成员发送加密消息
/cencrypt group clear — 移除所有群组成员
--- 别名 ---
/cencrypt alias em — 设置 /em 为 /cencrypt msg 的快捷方式(默认)
/cencrypt alias — 禁用别名快捷方式
**协议:** 消息采用 AES-256-GCM 加密,并通过原版 `/msg` 命令发送。模组会拦截传入的私聊消息,检测 `[CTP2P]` 标记,进行解密并显示明文。密文绝不会出现在聊天栏中。
**加密密钥优先级:** 玩家专属密钥(如果通过 `/cencrypt set` 设置)→ 玩家名称(始终作为备用)。无需全局密钥——零配置即可立即开始加密聊天。
**玩家专属密钥:** 使用 `/cencrypt set <player> <password>` 为特定玩家设置密钥。与该玩家的收发消息将使用该玩家的密钥,而不是回退到玩家名称。使用 `/cencrypt clear <player>` 移除该玩家的专属密钥。这允许在同一服务器上对不同好友使用不同的密钥。
**送达确认:** 每条消息都携带唯一 ID。接收方会自动回复 ACK。发送方在成功时看到 `✓ Delivered`,或在 30 秒超时后(离线/密钥错误/截断)看到 `✗ Could not deliver`。
**命令别名:** 使用 `/cencrypt alias em` 将 `/em` 设置为 `/cencrypt msg` 的快捷方式。然后 `/em Bob hello` 的效果等同于 `/cencrypt msg Bob hello`。使用 `/cencrypt alias` 禁用别名。默认别名为 `em`。
**密钥持久化:** 玩家专属密钥保存在 `config/client-tools/global.json` 中,并在重启时自动恢复。使用 `/cencrypt stop` 清除所有密钥。
**无法解密的消息:** 如果传入的 `[CTP2P]` 消息无法解密(密钥错误、数据损坏),将显示可见警告。
---
## 支持的语言
| 语言 | 状态 |
|----------|--------|
| English (en_us) | ✅ 完整 |
| Simplified Chinese (zh_cn) | ✅ 完整 |
---
## 构建
```bash
./gradlew build
输出 JAR 包:build/libs/client-tools-*.jar
依赖项
必需
| 依赖项 |
版本 |
| Minecraft |
1.21~1.21.8 |
| Fabric Loader |
>= 0.16.10 |
| Fabric API |
* |
| Java |
>= 21 |
可选(推荐)
| 依赖项 |
用途 |
| ModMenu |
在模组界面添加配置按钮 |
| Cloth Config |
图形化设置 GUI(Flight, Craft, Sweep, Display, Timer, Status) |
| Litematica |
启用 /clitematica 和 Litematica 集成以用于 /csweep |
许可证
MIT License
Client Tools

Support Minecraft 1.21~1.21.8
Download on Modrinth | Download on CurseForge
客户端自动化工具集 / A collection of client-side automation tools.
Sweep path preview with highlight overlay
Arrow trajectory prediction with landing marker
Crafting station highlight with input/output containers
Furina doll 3D model applied to items via /cdoll
Download
Introduction
Client Tools is a Fabric client-side mod for Minecraft 1.21. It provides 13 client commands (grouped into 12 functional modules):
/ccraft — Automated crafting chain execution with multi-source material scanning and optimal crafting plan generation
/ctimer — Timed command scheduler supporting repetitive execution with configurable intervals and counts
/cchat — Quick chat message sender
/cfly — Flight toggle with jump and status display
/csweep — Snake-pattern area traversal for automated clearing (works with Litematica-printer)
/csequence — mcfunction sequence editor and executor with external editor support, nesting, and looping
/cbuy / /csell — Shop automation for buying/selling items through container-based shops
/clitematica — Litematica selection tools: shift placement along axes, or make it follow player movement in real time
/cbow — Real-time arrow trajectory prediction with parabola, landing markers, Multishot support, entity-hit detection, and auto-aim targeting
/criptide — Override the water/rain requirement for Riptide tridents, enabling flight in deserts, caves, and under roofs
/cdoll — Dynamically apply the Furina doll 3D model to any item, with built-in resource pack auto-enable
/cencrypt — AES-256-GCM encrypted private chat via /msg, with delivery confirmation, group messaging, per-player keys, and command alias
All features run entirely on the client side. No server-side installation is required.
简介
Client Tools 是一个适用于 Minecraft 1.21 的 Fabric 客户端模组,提供 13 个客户端命令(功能上分为 12 个模块):
/ccraft — 自动合成链执行,支持多源材料扫描与最优合成计划生成
/ctimer — 定时命令调度器,支持按配置的时间间隔和次数重复执行命令
/cchat — 快捷聊天消息发送
/cfly — 飞行开关,支持起跳和状态查看
/csweep — 蛇形扫掠区域遍历,搭配投影打印机实现区域清空
/csequence — mcfunction 序列编辑器与执行器,支持外部编辑器、嵌套调用和循环
/cbuy / /csell — 商店自动化买卖,操作容器界面商店
/clitematica — Litematica 选区工具:沿轴移动投影,或使选区实时跟随玩家移动
/cbow — 实时箭矢轨迹预测,显示抛物线、落点标记,支持多重射击、实体命中检测和自动瞄准
/criptide — 覆盖激流三叉戟的水/雨限制,在沙漠、洞穴、屋檐下等任意位置均可飞行
/cdoll — 动态将 Furina 娃娃 3D 模型应用到任意物品,内置资源包自动启用
/cencrypt — AES-256-GCM 加密私聊,通过 /msg 发送加密消息,支持送达确认、群发、玩家专属密钥和命令别名
所有功能均完全在客户端运行,无需服务端安装。
Features
/ccraft — Automated Crafting
- Auto-detect crafting station and input/output containers from the block you are looking at
- Smart multi-source material scanning — detects available materials in the input chest and builds an optimal crafting plan
- Full crafting chain analysis — automatically handles intermediate crafting steps (e.g., planks → sticks → tools)
- Legacy source mode — specify a source item with
/ccraft source <item> for fixed chain crafting
- Configurable target count with infinite mode (crafts until materials run out or output is full)
- Per-setting clear — individually clear source, product, station, input, output, or count without resetting everything
- Multi-station management — save, load, list, and delete named station configurations; find the nearest saved station
- Enhanced block highlight (
/ccraft show) — customizable duration and per-position colors with tab-completion for named colors (red, green, blue...) and hex values; default colors: station green, input blue, output gold
- Real-time status with contextual hints — shows stop command when running, run command when ready
/ccraft help [subcommand] — detailed help for individual subcommands
- Container timeout and retry handling
- Real-time progress tracking during execution
/ctimer — Timed Command Scheduler
- Execute any command repeatedly at configurable intervals
- Support for human-readable durations:
1s, 5m, 1h, 500ms, 20t (ticks)
- Configurable repeat count or infinite loop
- List, stop by pattern matching, or stop all
- Multiple independent timers run concurrently
/ctimer help [subcommand] — detailed help for start, stop, stop-all, list
/cfly — Flight Toggle
- Toggle flight on/off with a single command
enable / disable — explicitly set flight state
jump — toggle auto-jump mode (automatically jumps when flight is enabled)
jump enable / jump disable — explicitly set auto-jump
status — check flight permission, active state, gamemode, and auto-jump setting
/cfly help [subcommand] — detailed help for individual subcommands
- Automatically syncs abilities to the server
- Auto-jump setting persists in
config/client-tools/global.json (along with /cbow and /criptide toggle states)
/csweep — Snake-Pattern Area Traversal
- Select a cuboid area with two corner positions (
pos1 / pos2)
- Litematica integration — auto-sync sweep area from Litematica schematic sub-regions (enabled by default); sweep across multiple regions sequentially
- Snake-pattern path generation with configurable station spacing (based on radius)
- Continuous smooth movement — linear interpolation between stations at constant speed, no stop-and-go
- Dual mode —
mining mode for block clearing, drain mode for liquid scanning
- maxspeed — set an upper speed limit for adaptive auto-speed mode
- autospeed — adaptive speed based on block density, varies between
speed and maxspeed
- avoidwater — automatically adjust Y-level to stay above water during traversal
- blockdetect — backward hemisphere blockage detection with two response modes:
wait (stop and wait) or slow (reduce speed to 20%)
- Dynamic cuboid adjustment — expand or contract the cuboid boundary based on your viewing direction
- Does not lock camera — uses position-only packets, you keep full view control
- Independent highlight toggles: green outline wireframe, cyan path preview (gray for visited segments)
- Y-level layer emphasis and nearest-station direction arrows are enabled by default
- Pause & resume with full persistence — progress survives game restarts, pause acts as toggle
- Auto-save on disconnect — sweep progress is automatically saved when you disconnect, with a reconnect reminder
- Smooth approach — when resuming far from the path, flies smoothly to the target instead of teleporting
- Real-time nearest station tracking —
/csweep nearest toggles live tracking; nearest station updates as you move, with path direction arrows showing which way the sweep will go
- Y-level layer emphasis —
/csweep show layer highlights the current Y-level path with multi-offset thick lines, dims other Y-levels (follows sweep Y when running, player Y when idle)
- Multi-region layer emphasis — thickens the current sub-region outline, dims inactive regions for clarity
- Sub-region skip — skip to the next Litematica sub-region with
/csweep next
- Live speed adjustment — change flight speed mid-operation
- Progress bar with ETA in status display
- Anti-penalty floor (
/csweep antiground) — client-side ghost block path below stations eliminates the floating mining penalty; auto flight toggle on descent for smooth layer transitions; configurable block type (default: redstone ore)
/csweep penalty — debug command showing full movement penalty status (flight, ground, water, cobweb, stuck, blockage, speed)
/csweep help [subcommand] — detailed help for all subcommands with tab-completion
/cchat — Quick Chat Sender
- Send chat messages directly from the command line
- Useful for automation scripts and quick communication
/cchat help — show help information
/csequence — mcfunction Sequence Executor
- Create and manage
.mcfunction files with click-to-copy file paths for external editing
- Execute commands sequentially with configurable delay between each line
- Supports nested sequences — a sequence can call another, which can call another (up to 10 levels deep)
- Cycle detection — prevents infinite recursion (A→B→A is blocked automatically)
- Loop mode for repeating sequences
- All sequence files are stored in
config/client-tools/sequences/
/csequence help [subcommand] — detailed help for individual subcommands
/cbuy / /csell — Shop Automation
- Automate buying and selling items through container-based shop GUIs
- Supports Chinese item names and Minecraft item IDs
- Default count is
all (maximum possible) or specify a number
- Blocked while crafting or another shop operation is running
- Tab-completion for item names (Chinese and English/Minecraft IDs)
/cbuy help / /csell help — show help information
/clitematica — Litematica Selection Tools
shift x <amount> / y <amount> / z <amount> — move the Litematica selection along individual axes
shift status — display current selection information including region count and coordinates
follow start — begin real-time following: records the player→selection offset and moves the selection as the player moves
follow stop — stop following; the selection stays at its current position
follow status — show current follow state: offset, reference positions, axis locks
follow axis <x|y|z> <lock|unlock> — lock or unlock individual axes to constrain selection movement (e.g., lock Y+Z to only move on X)
/clitematica help [subcommand] — detailed help for shift and follow
- Requires Litematica to be installed
/cbow — Arrow Trajectory Prediction & Auto-Aim
- Real-time parabolic trajectory display while charging a bow or holding a loaded crossbow
- Clean dotted trajectory line with configurable color
- Multishot support — shows 3 trajectories fanned at ±10° for both crossbows and custom server bows
- Entity-hit detection — trajectory and marker turn green when an arrow would hit a living entity
- Auto-aim targeting (
/cbow target) — lock bow aim onto a specific entity or enable auto-acquire mode
auto mode: raycasts from the player's eyes along the look direction, locks onto the first entity hit
- Manual mode: target a specific player by name or an entity via selector (
@e[distance=..50,limit=1])
- Mod controls the player's yaw/pitch in real-time, adjusting for gravity and drag to ensure the arrow passes through the target
- Lock persists until the bow is released; target config is kept across draw/release cycles
- Face-aligned landing markers — markers orient perpendicular to the hit surface (horizontal on ground, vertical on walls)
- 3D landing marker with crosshair, ring, and beacon line for high visibility
- Distance label at the landing point
- Simple toggle command with status display showing weapon info, charge %, and enchantments
- Toggle state persists in
config/client-tools/global.json across game restarts
/criptide — Riptide Trident Flight Override
- Overrides the
isInWaterOrRain() check so Riptide tridents work in any biome or location
- Works in deserts, caves, under roofs — anywhere without water or rain access
- Uses the vanilla
TridentItem code path for authentic Riptide velocity and spin animation
- Simple toggle command with status display showing held trident and Riptide enchantment level
/criptide help [subcommand] — detailed help for on, off, status
- Toggle state persists in
config/client-tools/global.json across game restarts
Furina Doll Resource Pack & /cdoll — Dynamic Item Appearance Override
- Built-in resource pack — includes a 3D Furina doll model (template_doll) that replaces armor stand, totem of undying, and compass appearances; auto-enabled on mod install
- Dynamic item override —
/cdoll add <item> applies the doll 3D model to any item, using the original item's texture as the card face
- Persisted globally to
config/client-tools/dolls.json; model files auto-generated to resourcepacks/client-tools-dolls/
- Auto-generates resource pack with correct pack format for the current Minecraft version
/cdoll remove <item> — unregister an item
/cdoll list — show all doll-ified items
/cdoll clear — remove all assignments
/cdoll help [subcommand] — detailed help with tab-completion
- The doll model system uses a parent-child architecture:
template_doll defines the 3D geometry, child models only need to specify parent and layer0 texture
ModMenu 与 Cloth Config 配置界面 / ModMenu & Cloth Config GUI
本模组集成 ModMenu,安装后可获得图形化配置界面,无需手动编辑 JSON。
使用方法
- 安装 ModMenu 和 Cloth Config(均为可选依赖)
- 打开「模组」界面
- 找到 Client Tools
- 点击齿轮按钮 ⚙️,打开配置界面
配置分类
| 分类 |
设置项 |
| Flight |
飞行开关、自动起跳 |
| Craft |
合成产品(product)、合成原料(source)、工位/输入/输出容器位置、重复合成数量 |
| Sweep |
扫掠半径、移动速度、自适应速度(autospeed)、速度上限(maxspeed)、避水(avoidwater)、方块检测(blockdetect)、Litematica 同步 |
| Display |
描边线框(outline)、路径预览(path)、层级强调(layer)、方向箭头(dir) |
| Timer |
当前活跃的定时器列表 |
| Status |
当前扫掠进度、合成运行状态 |
所有修改实时生效,关闭界面时自动保存。
Usage
- Install ModMenu and Cloth Config (both optional)
- Open the Mods screen
- Find Client Tools
- Click the gear icon ⚙️ to open the config GUI
Categories: Flight, Craft, Sweep, Display, Timer, Status. All changes take effect immediately.
配置文件参考 / Configuration Files
所有配置文件均位于 config/client-tools/ 目录下。无需手动编辑 —— 绝大多数设置可通过命令或 ModMenu 图形界面修改。
| 文件 |
关联命令 |
用途 |
global.json |
/cfly, /cbow, /criptide, /cencrypt |
全局持久化设置 |
sequences/ |
/csequence |
mcfunction 序列文件(.mcfunction) |
dolls.json |
/cdoll |
物品-娃娃模型映射列表 |
sweep/<world-id>.json |
/csweep |
扫掠暂停进度(按世界分别保存) |
global.json
跨会话持久化的全局设置:
{
"autoJump": false,
"cbowEnabled": false,
"criptideEnabled": false,
"p2pPlayerPasswords": {},
"p2pAlias": "em"
}
| 字段 |
对应命令 |
说明 |
autoJump |
/cfly jump |
飞行时自动起跳 |
cbowEnabled |
/cbow |
箭矢轨迹预测开关状态 |
criptideEnabled |
/criptide |
激流三叉戟覆盖开关状态 |
p2pPlayerPasswords |
/cencrypt set |
玩家专属密钥映射(玩家名 → 密码) |
p2pAlias |
/cencrypt alias |
/cencrypt msg 的快捷别名(默认 em) |
每次通过命令修改这些设置时,global.json 会自动更新。重启游戏后设置保持不变。
How to Use
Prerequisites
- Install Fabric Loader and Fabric API
- Place the built
client-tools-x.y.z.jar into your mods/ directory
- Launch the game
/ccraft Quick Start
--- Help ---
/ccraft — Show brief help
/ccraft help — Show full help
/ccraft help <subcommand> — Show detailed help for a subcommand
--- Basic setup ---
/ccraft product minecraft:diamond_pickaxe — Set the item you want to craft
/ccraft input — Set input chest (look at it)
/ccraft output — Set output chest (look at it)
/ccraft station — Set crafting table (look at it, or auto-detected)
--- Legacy source mode (fixed chain) ---
/ccraft source minecraft:diamond — Set the source material to craft from
--- Target count ---
/ccraft count 64 — Craft 64 products
/ccraft count infinite — Craft until materials run out or output is full
--- Control ---
/ccraft run — Start crafting!
/ccraft stop — Stop the running craft
/ccraft status — Check runtime progress and configuration
--- Block highlight ---
/ccraft show — Highlight positions for 3s (default colors: station green, input blue, output gold)
/ccraft show 10s — Highlight for 10 seconds
/ccraft show 5s red blue gold — 5s, custom colors (station/input/output)
/ccraft show 30s FF5555 55FF55 FFAA00 — 30s, hex colors
/ccraft show 1m green cyan magenta — 1 minute with named colors
--- Multi-station management ---
/ccraft save myfarm — Save current station config as "myfarm"
/ccraft load myfarm — Load saved station config "myfarm"
/ccraft list — List all saved station configs
/ccraft delete myfarm — Delete saved config "myfarm"
/ccraft nearest — Find and load the nearest saved station
--- Clear settings ---
/ccraft source clear — Clear only the source item
/ccraft product clear — Clear only the product item
/ccraft station clear — Clear only station position
/ccraft input clear — Clear only input box position
/ccraft output clear — Clear only output box position
/ccraft count clear — Reset count to default (1)
/ccraft clear — Clear all settings at once
Duration formats: 3s (seconds), 10t (ticks), 1m (minutes), 500ms (milliseconds)
Color formats: named (red, green, blue, gold, yellow, cyan, magenta, white, orange, purple, pink, lime, aqua, navy, teal, brown, gray, grey, black) or hex (FF5555, #FF5555, 0xFF5555)
Use Tab to auto-complete durations and colors in the show command.
/ctimer Quick Start
--- Help ---
/ctimer — Show brief help
/ctimer help — Show full help
/ctimer help <subcommand> — Show detailed help for a subcommand
--- Start timers ---
/ctimer start infinite interval 5s /say Hello — Send "/say Hello" every 5 seconds forever
/ctimer start 10 interval 30s /tp ~ ~10 ~ — Teleport every 30 seconds, 10 times
/ctimer start 5 interval 1m /weather clear — Run "/weather clear" every minute, 5 times
--- Manage timers ---
/ctimer list — List all active timers
/ctimer stop Hello — Stop timers whose command matches "Hello"
/ctimer stop-all — Stop all timers
Syntax: /ctimer start <count|infinite> interval <duration> <command>
Duration formats: 1s, 5m, 1h, 500ms, 20t (ticks), plain number = ticks
/cfly Quick Start
--- Help ---
/cfly — Toggle flight on/off
/cfly help — Show full help
/cfly help <subcommand> — Show detailed help for a subcommand
--- Flight control ---
/cfly enable — Enable flight
/cfly disable — Disable flight
--- Auto-jump ---
/cfly jump — Toggle auto-jump mode
/cfly jump enable — Enable auto-jump (jumps when flight is enabled)
/cfly jump disable — Disable auto-jump
--- Status ---
/cfly status — Check flight state, gamemode, and auto-jump setting
/csweep Quick Start
--- Help ---
/csweep — Show brief help
/csweep help — Show full help
/csweep help <subcommand> — Show detailed help for a subcommand
--- Setup ---
/csweep pos1 — Set first corner (look at block, or use player position)
/csweep pos1 100 64 200 — Set first corner manually
/csweep pos2 — Set opposite corner
/csweep radius 5 — Set station spacing radius (default 4, range 1–64)
/csweep speed 15 — Set flight speed in blocks/sec (default 10, range 0.5–100)
--- Adaptive speed ---
/csweep maxspeed — Show current maximum speed for autospeed mode
/csweep maxspeed 30 — Set max speed (default 20, range 0.5–100)
/csweep autospeed — Toggle adaptive speed based on block density
/csweep autospeed on/off — Explicitly enable/disable autospeed
--- Check current values ---
/csweep radius — Show current radius
/csweep speed — Show current speed
--- Adjust cuboid ---
/csweep expand 5 — Expand the cuboid 5 blocks along the face you're looking at
/csweep contract 3 — Shrink the cuboid 3 blocks along the face you're looking at
--- Highlight ---
/csweep show — Check current show settings
/csweep show outline — Toggle green cuboid wireframe
/csweep show path — Toggle cyan snake-path preview (works before starting!)
/csweep show layer — Toggle Y-level emphasis (thick current layer, dim others; on by default)
/csweep show dir — Toggle path direction arrows at nearest station (on by default)
--- Mode ---
/csweep mode — Show current mode (MINING or DRAIN)
/csweep mode mining — Set mining mode (block clearing)
/csweep mode drain — Set drain mode (liquid scanning)
--- Water & Blockage ---
/csweep avoidwater — Toggle automatic Y-level adjustment to stay out of water
/csweep avoidwater on/off — Explicitly enable/disable
/csweep blockdetect — Toggle backward hemisphere blockage detection
/csweep blockdetect on/off— Explicitly enable/disable detection
/csweep blockdetect wait — Stop and wait when blockage detected
/csweep blockdetect slow — Reduce speed to 20% when blockage detected
--- Litematica Integration ---
/csweep litematica on — Sync sweep area with Litematica schematic sub-regions (enabled by default)
/csweep litematica off — Use manual positions instead
/csweep litematica sync — Force re-sync with Litematica placement (refreshes regions)
/csweep litematica — Show Litematica sync status and sub-region list
--- Navigation ---
/csweep nearest — Toggle real-time nearest station tracking (updates as you move)
/csweep next — Skip current sub-region and jump to the next one
--- Control ---
/csweep start — Start sweep (or resume if paused state exists)
/csweep pause — Pause at current station / resume if paused (toggle)
/csweep stop — Stop and clear pause state
/csweep status — View config, progress, and pause state
/csweep reset — Clear all settings
--- Debug ---
/csweep penalty — Show movement penalty status (flight, water, cobweb, stuck, blockage, speed)
--- Anti-penalty floor ---
/csweep antiground — Show anti-penalty floor settings
/csweep antiground on/off — Enable/disable ghost block floor
/csweep antiground block <id> — Set floor block type (default: minecraft:redstone_ore)
Persistence: Pause state (current station index) is saved per-world to config/client-tools/sweep/<world-id>.json. You can disconnect, restart the game, and resume from where you left off with /csweep start. If you disconnect mid-sweep, progress is automatically saved and you'll be reminded on rejoin.
Speed adjustment: Change speed anytime with /csweep speed <value> — takes effect immediately even while running. With autospeed enabled, actual speed varies between speed and maxspeed based on block density.
Cuboid adjustment: Use expand/contract to adjust the cuboid boundary after setup. The mod determines which face to adjust based on your viewing direction — look at the face you want to move and run the command. Works for all six faces (±X, ±Y, ±Z).
Smooth movement: The sweep no longer stops at each station. The player moves continuously along the path at constant speed with linear interpolation between waypoints — faster and more natural.
Litematica integration: Litematica sync is enabled by default. If Litematica is installed and a schematic is loaded, the sweep area automatically syncs to the schematic's sub-regions. Each sub-region is swept sequentially. Setting manual pos1/pos2 auto-disables the sync. Use /csweep litematica to view detected regions and their coordinates.
Anti-penalty floor: /csweep antiground on enables a ghost block strip below the sweep path. The player stands on these blocks during horizontal movement, eliminating the floating mining penalty. Flight automatically toggles ON during vertical descents to avoid TP loops, then OFF on the next layer. Uses client-side ghost blocks (no items consumed). Configure block type with /csweep antiground block <id> (default: minecraft:redstone_ore). Remember to blacklist this block in your printer!
Mid-sweep recovery & real-time tracking: /csweep nearest toggles real-time nearest station tracking. When enabled, the nearest station updates as you move, with path direction arrows showing the sweep direction at that station. Move around to find the best starting point, then /csweep start to begin from there. The executor flies you smoothly to the target station — no instant teleport. /csweep nearest again to turn off tracking. If a paused state exists, using /csweep nearest clears it (you're choosing a new start point).
/cchat Quick Start
/cchat Hello everyone! — Send "Hello everyone!" in chat
/cchat help — Show help information
/csequence Quick Start
--- Help ---
/csequence — Show brief help
/csequence help — Show full help
/csequence help <subcommand> — Show detailed help for a subcommand
--- Editing ---
/csequence new daily — Create an empty daily.mcfunction and show its file path
/csequence edit daily — Show daily.mcfunction file path (click to copy; creates if missing)
/csequence folder — Show sequences folder path (click to copy)
/csequence list — List all saved sequences
/csequence delete daily — Delete daily.mcfunction
--- Execution ---
/csequence run daily — Run daily.mcfunction (1-tick delay, no loop)
/csequence run daily 1s — Run with 1-second delay between commands
/csequence run daily 500ms loop— Run with 500ms delay, repeat forever
/csequence run farm 5t loop — Run with 5-tick delay, loop
--- Control ---
/csequence stop — Stop the running sequence
/csequence status — Show current progress, nesting depth, and call stack
mcfunction format: Standard Minecraft function syntax — one command per line, # for comments, blank lines ignored.
Nested sequences: Use /csequence run <name> inside a sequence file to call another sequence. The parent pauses, the child runs to completion, then the parent resumes. Cycle detection prevents infinite recursion (max 10 levels deep).
File paths: File paths are shown as clickable text in chat — click to copy the path, then paste into your file manager or editor to open the file directly. This approach ensures CurseForge compliance by not launching external programs.
/cbuy / /csell Quick Start
--- Help ---
/cbuy help — Show help information
/csell help — Show help information
--- Usage ---
/cbuy minecraft:sand — Buy sand (max/all)
/cbuy sand 64 — Buy 64 sand (English name)
/cbuy 沙子 64 — Buy 64 sand (Chinese name)
/csell minecraft:diamond 10 — Sell 10 diamonds
/csell 钻石 all — Sell all diamonds (Chinese name)
Item names: Supports Minecraft IDs (minecraft:sand), English names (sand), and Chinese names (沙子). Tab-completion available for both English and Chinese names.
Count: Default is all (maximum possible). Can be a specific number. Count is parsed from the last space-separated token if it's all or a number.
Requirements: A shop GUI must be open. Blocked while crafting or another shop operation is running.
/clitematica Quick Start
--- Help ---
/clitematica help — Show full help
/clitematica help shift — Show shift subcommand details
/clitematica help follow — Show follow subcommand details
--- Shift (move selection along axes) ---
/clitematica shift x 5 — Move selection 5 blocks east (+X)
/clitematica shift x -3 — Move selection 3 blocks west (-X)
/clitematica shift y 2 — Move selection 2 blocks up (+Y)
/clitematica shift y -1 — Move selection 1 block down (-Y)
/clitematica shift z 4 — Move selection 4 blocks south (+Z)
/clitematica shift z -2 — Move selection 2 blocks north (-Z)
/clitematica shift status — Show current selection info (region count, names, coordinates)
--- Follow (selection follows player in real time) ---
/clitematica follow start — Begin following; records player→selection offset
/clitematica follow stop — Stop following; selection stays in place
/clitematica follow status — Show offset, reference positions, axis locks
/clitematica follow axis y lock — Lock Y axis (selection only moves on X and Z)
/clitematica follow axis z lock — Lock Z axis too (selection only moves on X)
/clitematica follow axis y unlock — Unlock Y axis (resume vertical following)
Requirements: Litematica must be installed and a schematic must be loaded.
/cbow Quick Start
--- Help ---
/cbow — Toggle arrow trajectory prediction on/off
/cbow help — Show help information
/cbow help <subcommand> — Show detailed help for on/off/status/target
--- Control ---
/cbow on — Enable trajectory prediction
/cbow off — Disable trajectory prediction
/cbow status — Show current state, weapon type, charge %, enchantments
--- Auto-Aim Targeting ---
/cbow target auto — Arm auto-targeting: draw bow, aim will lock when crosshair passes an entity
/cbow target <player> — Set a specific player as target (by name)
/cbow target @e[distance=..50,limit=1] — Set target via entity selector
/cbow target @p — Target nearest player
/cbow target — Show current target status
/cbow target stop — Cancel targeting
Usage: Hold a bow and draw it (or hold a loaded crossbow). A dotted golden parabola shows the predicted arrow path in real-time. The landing point is marked with a prominent crosshair marker. If the arrow would hit an entity, the entire trajectory turns green and a diamond marker appears at the impact point. Multishot bows/crossbows show 3 trajectories. The toggle state persists across game restarts in config/client-tools/global.json.
Auto-aim: Set a target with /cbow target auto (auto-acquire on draw) or /cbow target <name/selector>. When you draw the bow, the mod controls your aim — adjusting yaw/pitch in real-time with full gravity and drag compensation. The lock releases when you fire; the target config is kept for your next shot. Use /cbow target stop to clear.
/criptide Quick Start
--- Help ---
/criptide — Toggle Riptide override on/off
/criptide help — Show help information
/criptide help <subcommand> — Show detailed help for on/off/status
--- Control ---
/criptide on — Enable Riptide override
/criptide off — Disable Riptide override
/criptide status — Show current state, held trident, Riptide level
Usage: Hold a trident with the Riptide enchantment, enable the override with /criptide on, then right-click and release to launch. Works anywhere regardless of biome, weather, or sky access. The vanilla game code handles the spin attack, velocity, and sound effects. The toggle state persists across game restarts in config/client-tools/global.json.
/cdoll Quick Start
--- Help ---
/cdoll help — Show full help
/cdoll help <subcommand> — Show detailed help for a subcommand
--- Manage doll items ---
/cdoll add minecraft:diamond — Apply doll model to diamond
/cdoll add stick — Apply doll model to stick (bare name = minecraft:stick)
/cdoll remove stick — Remove doll appearance from stick
/cdoll list — Show all doll-ified items
/cdoll clear — Remove all doll assignments
Tab-completion: add suggests all registered item IDs. remove suggests only items currently in the doll list.
How it works: Each doll-ified item gets a model JSON file generated under resourcepacks/client-tools-dolls/. The file inherits from minecraft:item/template_doll (provided by the built-in furina_doll pack) and sets layer0 to the original item's texture. Resource packs are automatically reloaded after each change.
/cencrypt — Encrypted Private Chat
--- Help ---
/cencrypt help — Show full help
/cencrypt help <subcommand> — Show detailed help for a subcommand
--- Key setup ---
/cencrypt set <player> <password> — Set a player-specific encryption key
/cencrypt clear <player> — Clear player-specific key (revert to player name)
/cencrypt stop — Clear all player keys
/cencrypt status — Show key count and group info
--- Messaging ---
/cencrypt msg <player> <message> — Encrypted message to one player (tab-completes online players)
/cencrypt group add <player> — Add player to group
/cencrypt group remove <player> — Remove player from group
/cencrypt group list — Show group members
/cencrypt group send <message> — Encrypted message to all online group members
/cencrypt group clear — Remove all group members
--- Alias ---
/cencrypt alias em — Set /em as shortcut for /cencrypt msg (default)
/cencrypt alias — Disable the alias shortcut
Protocol: Messages are AES-256-GCM encrypted and sent through vanilla /msg. The mod intercepts incoming whispers, detects the [CTP2P] marker, decrypts, and displays plaintext. Ciphertext never appears in chat.
Encryption key priority: Player-specific key (if set via /cencrypt set) → player name (always available as fallback). No global key needed — you can start encrypted chat immediately with zero configuration.
Player-specific keys: Use /cencrypt set <player> <password> to set a key for a specific player. Messages to/from that player will use their key instead of the player name fallback. Use /cencrypt clear <player> to remove the player-specific key. This allows different keys for different friends on the same server.
Delivery confirmation: Each message carries a unique ID. The recipient auto-replies with an ACK. The sender sees ✓ Delivered on success or ✗ Could not deliver after a 30-second timeout (offline / wrong key / truncated).
Command alias: Use /cencrypt alias em to set /em as a shortcut for /cencrypt msg. Then /em Bob hello works like /cencrypt msg Bob hello. Disable with /cencrypt alias. Default alias is em.
Key persistence: Player-specific keys are saved to config/client-tools/global.json and auto-restored on restart. Use /cencrypt stop to clear all keys.
Undecryptable messages: If an incoming [CTP2P] message can't be decrypted (wrong key, corruption), a visible warning is shown.
Supported Languages
| Language |
Status |
| English (en_us) |
✅ Complete |
| Simplified Chinese (zh_cn) |
✅ Complete |
Build
./gradlew build
Output JAR: build/libs/client-tools-*.jar
Dependencies
Required
| Dependency |
Version |
| Minecraft |
1.21~1.21.8 |
| Fabric Loader |
>= 0.16.10 |
| Fabric API |
* |
| Java |
>= 21 |
Optional (Recommended)
| Dependency |
Purpose |
| ModMenu |
Adds a config button in the Mods screen |
| Cloth Config |
Graphical settings GUI (Flight, Craft, Sweep, Display, Timer, Status) |
| Litematica |
Enables /clitematica and Litematica integration for /csweep |
License
MIT License
评论 0
登录后参与评分
还没有评论,来抢沙发吧