CommandKeys
一款强大的命令宏模组。
功能
- 每个宏可包含多个命令
- 每个按键绑定可关联多个宏
- 命令之间可选延迟时间
- 支持修饰键的高效按键冲突管理
- 五种模式:
- 按下按键时发送所有命令
- 循环执行命令,每次按键执行一条
- 按可配置的间隔重复执行
- 随机选择一条消息并发送
- 在聊天栏输入命令,但不发送
- 配置文件支持基于服务器地址或世界名称自动切换
- 完全自定义的图形界面,便于配置
![]() |
![]() |
![]() |
使用方法
配置文件
自动切换
- 当你加入世界/服务器时,其名称/地址将与配置文件列表进行比对。如果存在与该世界/服务器关联的配置文件,则该配置将被激活。否则,将使用默认配置文件。
- 使用
S和M按钮将某个配置文件设为单人游戏或多人游戏的默认配置。
手动切换
- 要手动激活配置文件,请点击左侧的上箭头按钮。
- 点击链接按钮可将该配置文件与当前世界/服务器关联,以便未来自动激活。
- 点击设置按钮可重命名配置文件或删除关联。
宏
访问方式
- 在配置文件选择界面上点击大按钮,或在游戏内按下编辑键(默认:
K)来编辑配置文件。
绑定按键
- 你可以将几乎任何键盘按键或鼠标按钮绑定到宏,类似于 Minecraft 自带的控制设置。此外,你还可以绑定任意一对按键;只需按住其中一个键的同时按下另一个键即可(例如,按住 'Shift' 的同时按下 'T')。
冲突策略
- 如果某个按键已被 Minecraft 占用,你可以选择冲突处理策略:
Submit(提交):宏将被忽略,Minecraft 的按键绑定将正常生效。Assert(强制):宏和 Minecraft 的按键绑定都将生效。Veto(否决):宏将生效,Minecraft 的按键绑定将被取消(如果可能)。Avoid(避免):宏在游戏中将无法工作,但你仍可以通过在编辑界面(未选中任何内容时)按下相应按键来激活它。例如,如果你已将宏绑定到W,则按下K再按下W即可激活它。
发送模式
Send(发送):将发送宏中的所有命令。你可以配置命令之间的延迟。Type(输入):第一条命令将被输入到聊天框中,但不会发送。Edit(编辑):将显示一个图形界面,允许你为%edit%占位符输入替换内容,然后发送第一条消息。Cycle(循环):将循环执行命令,每次按键发送一条命令。- 注意:在
Cycle模式下,如果需要单次按键发送多条命令,请将它们放入同一个输入框中,并用双逗号分隔(例如/tick freeze,,/say Stopped)。 Random(随机):每次按键时将随机选择一条消息并发送。Repeat(重复):与Send类似,但宏会重复执行(延迟可配置),直到你再次按下该按键为止。
占位符
-
简单占位符
%lastsent%:历史记录中最近发送的消息或命令(如果有)。%lastcmd%:历史记录中最近发送的命令(如果有)。%clipboard%:剪贴板的内容(如果有)。%myname%:Minecraft 用户名。%pmsender%:最近收到的私人消息的发件人名称(如果有)。(最多搜索 50 条记录)。%pos%:玩家的整数坐标(x y z)。%x%:玩家的整数 X 坐标。Y 和 Z 坐标也可用。%lpos%:玩家视线所注视方块的整数坐标(如果有)。同时提供%lx%、%ly%、%lz%。
-
正则表达式占位符
%#(.*)%:从最近收到的匹配#后正则表达式的消息中提取的第 1 组正则捕获组内容(如果有)。注意:正则模式必须至少包含 1 个捕获组。%clipboard#(.*)%:剪贴板的内容(如果有),并验证其是否匹配#后的正则表达式模式。这可用于防止意外暴露剪贴板内容。例如,使用%clipboard#^-?\d+ -?\d+ -?\d+$%仅在剪贴板内容格式为一组坐标时才发送。%pos([FBLR])(\d+)%:类似于%pos%,但会根据玩家最接近朝向的基本方向(前/后/左/右)偏移若干方块。例如,使用%posL20%获取玩家左侧 20 个方块的坐标。%x([+-]\d+)%:类似于%x%,但会偏移若干方块。例如,使用%x-10%获取玩家西方 10 个方块的 X 坐标。Y 和 Z 坐标也可用。%lpos([FBLR])(\d+)%:如上所述,但针对玩家视线所注视的方块(如果有)。%lx([+-]\d+)%:如上所述,但针对玩家视线所注视的方块(如果有)。
依赖项
Fabric: Fabric API, ModMenu
NeoForge: 无
兼容性
如果遇到任何问题,请在 Discord 或 GitHub 上报告。
联系方式
CommandKeys
A powerful command macro mod.
Features
- Multiple commands per macro
- Multiple macros per keybind
- Optional delay timing between commands
- Efficient keybind conflict management with modifier key support
- Five modes:
- Send all commands when the key is pressed
- Cycle through commands, one per keypress
- Repeat on a configurable interval
- Select a random message and send
- Type the command in chat, but don't send it
- Profiles with automatic switching based on server address or world name
- Fully custom GUI for easy configuration
![]() |
![]() |
![]() |
Usage
Profiles
Automatic Switching
- When you join a world/server, the name/address will be checked against the list of profiles. If there is a profile linked to that world/server, it will be activated. Otherwise, the default profile will be used.
- Use the
SandMbuttons to make a profile the default for singleplayer or multiplayer.
Manual Switching
- To activate a profile manually, click the up-arrow button on the left.
- Click the link button to link the profile to the world/server for future automatic activation.
- Click the settings button to rename the profile or remove links.
Macros
Access
- Edit a profile by clicking the large button on the profile selection screen, or by pressing the
edit key
(default:
K) in-game.
Binding Keys
- You can bind almost any keyboard key or mouse button to a macro, similar to Minecraft's own Controls. However, you can also bind any pair of keys; just press one while holding the other ( e.g. press 'T' while holding 'Shift').
Conflict Strategy
- If a key is already in use by Minecraft, you can choose a conflict strategy;
Submit: The macro will be ignored, the Minecraft keybind will function normally.Assert: The macro and the Minecraft keybind will both function.Veto: The macro will function, the Minecraft keybind will be cancelled (if possible).Avoid: The macro will not work in-game, but you can still activate it by pressing the key while on the edit screen (with nothing selected). For example, if you have a macro bound toW, pressKthenWto activate it.
Send Mode
Send: All commands for the macro will be sent. You can configure delays between commands.Type: The first command will be typed into the chat box, but not sent.Edit: A GUI will be shown to allow you to enter a replacement for the%edit%placeholder, then the first message will be sent.Cycle: The commands will be cycled through, with one command sent each time you press the key.- Note: In
Cyclemode, if you need more than one command to be sent for a single key-press, enter those commands into a single box, separated by pairs of commas (e.g./tick freeze,,/say Stopped). Random: A message will be chosen at random and sent each time the key is pressed.Repeat: LikeSend, but the macro will be repeated (delay is configurable) until you press the key again.
Placeholders
-
Simple Placeholders
%lastsent%: The most recently-sent message or command in history, if any.%lastcmd%: The most recently-sent command in history, if any.%clipboard%: The contents of the clipboard, if any.%myname%: Minecraft username.%pmsender%: The name of the sender of the most recently-received private message, if any. ( Searches max of 50).%pos%: The integer coordinates of the player (x y z).%x%: The integer X coordinate of the player. Also available for Y and Z.%lpos%: The integer coordinates of the block the player is looking at, if any. Also provides%lx%,%ly%,%lz%.
-
Regex Placeholders
%#(.*)%: Regex Group 1 from the most recently-received message matching the regex following the#, if any. Note: regex pattern must have at least 1 capturing group.%clipboard#(.*)%: The contents of the clipboard, if any, verified to match a regex pattern following the#. This can be used to prevent unintentional exposure of clipboard contents. E.g. use%clipboard#^-?\d+ -?\d+ -?\d+$%to only send the clipboard contents if it's formatted like a set of coordinates.%pos([FBLR])(\d+)%:%pos%but offset some number of blocks in a direction relative to the cardinal direction that the player is nearest to facing. E.g. use%posL20%to get the coordinates 20 blocks to the player's left.%x([+-]\d+)%:%x%but offset some number of blocks. E.g. use%x-10%to get the X coordinate 10 blocks to the player's West. Also available for Y and Z.%lpos([FBLR])(\d+)%: As perposabove but for the block the player is looking at, if any.%lx([+-]\d+)%: As perxabove but for the block the player is looking at, if any.
Dependencies
Fabric: Fabric API, ModMenu
NeoForge: None
Compatibility
If you encounter issues, please report on Discord or GitHub.
Contact
版本游戏版本平台发布时间本站下载
正式版
3.104.1+26.3
v3.104.1+26.3-Fabric
26.3 Fabric 1 个月前 ·
0
26.3
Fabric
1 个月前
0
下载 Command Keys
正式版
3.104.1+26.3
v3.104.1+26.3-NeoForge
26.3 NeoForge 1 个月前 ·
0
26.3
NeoForge
1 个月前
0
下载 Command Keys
正式版
3.103.2+26.2
v3.103.2+26.2-Fabric
26.2 Fabric 1 个月前 ·
0
26.2
Fabric
1 个月前
0
下载 Command Keys
正式版
3.103.2+26.2
v3.103.2+26.2-NeoForge
26.2 NeoForge 1 个月前 ·
0
26.2
NeoForge
1 个月前
0
下载 Command Keys
正式版
3.102.5+26.1.2
v3.102.5+26.1.2-NeoForge
26.1.226.1.1 NeoForge 1 个月前 ·
0
26.1.2
26.1.1
26.1
NeoForge
1 个月前
0
下载 Command Keys
版本:3.102.5+26.1.2
游戏版本:26.1.2、26.1.1、26.1
平台:NeoForge
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
正式版
3.102.5+26.1.2
v3.102.5+26.1.2-Fabric
26.1.226.1.1 Fabric 1 个月前 ·
0
26.1.2
26.1.1
26.1
Fabric
1 个月前
0
下载 Command Keys
版本:3.102.5+26.1.2
游戏版本:26.1.2、26.1.1、26.1
平台:Fabric
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
正式版
2.4.1+1.21.1
v2.4.1+1.21.1-Fabric
1.21.31.21.2 Fabric 1 个月前 ·
1
1.21.3
1.21.2
1.21.1
1.21
Fabric
1 个月前
1
下载 Command Keys
版本:2.4.1+1.21.1
游戏版本:1.21.3、1.21.2、1.21.1 等
平台:Fabric
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
正式版
2.4.1+1.21.1
v2.4.1+1.21.1-NeoForge
1.21.31.21.2 NeoForge 1 个月前 ·
0
1.21.3
1.21.2
1.21.1
NeoForge
1 个月前
0
下载 Command Keys
版本:2.4.1+1.21.1
游戏版本:1.21.3、1.21.2、1.21.1
平台:NeoForge
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
正式版
3.104.0+26.3
v3.104.0+26.3-NeoForge
26.3 NeoForge 2 个月前 ·
0
26.3
NeoForge
2 个月前
0
下载 Command Keys
正式版
3.104.0+26.3
v3.104.0+26.3-Fabric
26.3 Fabric 2 个月前 ·
0
26.3
Fabric
2 个月前
0
下载 Command Keys
3.104.1+26.3
正式版
2026-10-09
- 在发送文本前添加了无效字符过滤器
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
模组
玉Jade ?
Snownee
显示你正在注视的方块的信息。(适用于 Minecraft 1.16+ 的 Hwyla/Waila 分支)
实用前置
247
模组
物品管理器Just Enough Items (JEI)
mezz
查看物品与配方
前置实用
229
模组
Xaero的小地图
thexaero
在游戏画面角落显示附近世界地形、玩家、生物和实体的地图。可创建路径点,帮助你找到标记过的位置。
冒险交通
196
模组
KubeJS
Lat
使用 JavaScript 编辑配方、添加自定义物品、编写世界事件!
前置实用
181
模组
开放派对与认领Open Parties and Claims
thexaero
添加区块认领和玩家组队功能,并与 Xaero's Minimap 和 World Map 集成
前置实用
152
模组
世界地图Xaero的世界地图
thexaero
添加全屏世界地图,显示你在世界中已探索的区域。与 Xaero's Minimap 搭配使用效果极佳。
冒险交通
129



评论 0
登录后参与评分
还没有评论,来抢沙发吧