使用带有 禁飞 效果的信标时,鞘翅和 Happy Ghasts(快乐恶魂)在其范围内将失效。无法起飞,从外部滑翔进入的玩家会失去翅膀功能并坠落。激流三叉戟和烟花推进也会被阻止,因此在区域内没有任何方式可以升空。
安装
执行是服务器端的。 该 jar 文件放入服务器的 mods/ 文件夹中,无论玩家是否安装了此模组,所有玩家都会受到每个区域的影响——完全未修改的原版客户端受到的影响与其他人完全相同。
在 客户端 上安装同一个 jar 文件会在信标界面中添加“禁飞”按钮。这仅用于 设置 禁飞信标;请参阅 配置信标。
用法
像往常一样建造完整的信标,并赋予其 禁飞 效果。当该信标激活时,其范围内的鞘翅将无法使用。
- 激活鞘翅 会被阻止。
- 激流 三叉戟不会发射,烟花火箭 也不会提供推进力。
- Happy ghasts 不会带你进入,并且会被阻挡在区域之外。
- 飞入该区域 会产生以下三种效果之一:
zero-momentum(默认):你的速度减缓至步行速度,但保持滑翔状态,因此你会缓慢下降并安全着陆。
no-glide:鞘翅立即禁用,就像损坏了一样。希望你拥有急迫 IV……(注:此处原文 Feather Falling IV 应为保护 IV 或类似防护附魔的语境,但根据术语表保留原文逻辑,Feather Falling 通常译为软着陆/摔落保护,结合语境意为希望你有足够的防护)。
damage:你继续飞行并保持控制,但会受到持续伤害,仿佛被击落。虽然可怕,但在盔甲保护下仍可幸存。
没有客户端模组
模组在服务器上单独运行时功能正常,但客户端模组能让体验更完善。不过这并不是全有或全无的关系:部分玩家可以模组,而其他玩家则不用。
未在客户端安装模组的玩家:
- 会 完全受到所有禁飞区域的影响,
- 无法 在建造自己的信标时选择
No-Fly,
- 打开禁飞信标的界面时会显示“未选择任何内容”(无害)。
禁飞信标不提供药水效果——选择禁飞是独占的,正如选择加速意味着你不会获得速度一样。一个信标,一项功能。
配置信标
有两种方法可以为信标配置禁飞功能。
使用客户端模组
如果你在客户端和服务端都安装了此模组,你可以正常使用信标界面;在再生效果旁边的第 4 层级行中,你会发现“禁飞”效果。
目前游戏 UI 中无法设置 zero-momentum/no-glide/damage;你需要成为服务器管理员才能进行设置(见下文)。
仅限服务端
如果你没有安装模组,那么你需要成为服务器管理员以运行 /noflyzone 命令。站在你想要配置的信标旁边,执行 /noflyzone on 或 /noflyzone off,即可相应地配置信标。
你还可以使用 /noflyzone status 进行检查,并使用 /noflyzone mode 在 zero-momentum、no-glide 和 damage 模式之间切换。
模式是全局的;你不能为不同的信标设置不同的模式。
你也可以编辑 config/noflyzone.properties 文件(在游戏首次运行后,该文件应会自动创建)来设置配置。
单人游戏
将 jar 文件放入单人游戏客户端的 mods/ 文件夹中,你将同时获得两方面的功能——你可以建造和配置禁飞信标,且它们能正常工作。这也适用于“开放局域网”。
如果世界后来被移动到没有安装模组的服务器上,禁飞信标会悄无声息地变成不产生任何效果的普通信标。
Build a beacon with a No-Fly effect and elytra and happy ghasts stop working
inside its range. Takeoff is refused, and anyone who glides in from outside has
their wings disabled and falls. Riptide tridents and firework boosts are blocked
too, so nothing gets you airborne inside the zone.
Installation
Enforcement is server-side. The jar goes in the server's mods/ folder, and
every player is subject to every zone whether or not they have the mod — a
completely unmodified vanilla client is affected exactly like anyone else.
The same jar on a client adds the No-Fly button to the beacon screen. That is
only needed to set up a no-fly beacon; see Configuring a beacon.
Usage
Build a full beacon as normal, and give it the No-Fly effect. While that
beacon is active, elytra don't work in its range.
- Activating Elytra in the zone is prevented.
- Riptide tridents won't launch, and firework rockets won't boost.
- Happy ghasts won't carry you in and are turned away from the zone.
- and flying into the zone has one of three effects:
zero-momentum (default): You're slowed to walking pace but keep gliding, so you drift down and land safely.
no-glide: Elytra are immediately disabled, as if they broke. Hope you have Feather Falling IV…
damage: You keep flying and keep control, but take steady damage as though being shot down. Scary, survivable with armour.
Without the client mod
The mod functions properly on the server alone, but the client-side mod neatens
things up. It's not all-or-nothing, though: some players can use the mod, while
others don't.
Players without the mod installed on their clients:
- are fully affected by every no-fly zone,
- can't select
No-Fly when building their own beacon,
- see "nothing selected" if they open a no-fly beacon's screen (harmless).
A No-Fly beacon grants no potion effect — picking No-Fly is exclusive, exactly
as picking Haste means you don't get Speed. One beacon, one job.
Configuring a beacon
There are two ways to configure a beacon for No-Fly.
With the client-side mod
If you have this mod installed client-side as well as server-side, you can just
use the beacon screen normally; in the Tier-4 row next to Regeneration, you'll
find the "No-Fly" effect.
There's currently no way to set zero-momentum/no-glide/damage from the
game UI; you'll need to be a server op to set that (see below)
Server-side-only
If you haven't installed the mod, then you need to be a server op to run the
/noflyzone function. Stand next to the beacon you want to configure, and
execute /noflyzone on or /noflyzone off and that should configure the beacon
accordingly.
You can also use /noflyzone status to check, and /noflyzone mode
to change between zero-momentum, no-glide and damage modes.
The mode is server-wide; you can't have different modes for different beacons.
You can also edit config/noflyzone.properties (once the game has run once,
which should create that file) to set the configuration.
Single-player
Dropping the jar into a singleplayer client's mods/ folder gives you both
halves at once — you can build and configure no-fly beacons, and they work. This
also covers "Open to LAN".
If a world is later moved to a server without the mod, no-fly beacons quietly
become ordinary beacons that grant no effect.
评论 0
登录后参与评分
还没有评论,来抢沙发吧